1. Киришүү
Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and retain it for future reference.
This cordless hot glue gun is designed for various crafting and DIY projects, offering fast heating, energy efficiency, and portability. It is suitable for use with materials such as plastics, wood, paper products, textiles, and shells.
2. Продукт бүтүп калдыview
Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun.
2.1-сүрөт: Labeled components of the WORKPRO Cordless Hot Glue Gun, including Nozzle, ON/OFF Switch, Glue Stick insertion point, LED Indicator, Trigger Lever, Type-C Cable, Retractable Stand-up Base, and Type-C Charging Port.
- Сопло: Dispenses melted glue.
- ON/OFF которуу: Аппаратты күйгүзөт же өчүрөт.
- Glue Stick Insertion Point: Where glue sticks are loaded.
- LED көрсөткүчү: Displays heating status and battery charge level.
- Триггер рычагы: Activates glue dispensing.
- Type-C кабели: Ички батареяны заряддоо үчүн.
- Retractable Stand-up Base: Provides stability when the glue gun is not in use.
- Type-C заряддоо порту: Connects the charging cable.
3. Эмнелер камтылган
The WORKPRO 3.6V Cordless Hot Glue Gun kit typically includes the following items:
- WORKPRO 3.6V Cordless Hot Glue Gun (Model: W125235)
- 20 Pcs Mini Glue Sticks (0.27" Dia)
- C түрүндөгү кубаттоочу кабель
- Built-in Lithium Ion Battery (2500mAh)
3.1-сүрөт: The WORKPRO Cordless Hot Glue Gun and included glue sticks.
4. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Бардык коопсуздук эскертүүлөрүн жана нускамаларын окуңуз. Эскертүүлөрдү жана нускамаларды аткарбоо электр шокуна, өрткө жана/же олуттуу жаракатка алып келиши мүмкүн.
- Always wear appropriate personal protective equipment, such as safety glasses, when operating the glue gun.
- Сопло жана эриген клей абдан ысып кетет. Күйүктүн алдын алуу үчүн териге тике тийбеңиз.
- Do not touch the nozzle or melted glue immediately after use. Allow the tool to cool completely.
- Жумуш аймагы жакшы желдетилип турушун камсыз кылыңыз.
- Do not leave the hot glue gun unattended while it is on or heating.
- Балдардын колу жетпеген жерде сактаңыз. Бул оюнчук эмес.
- Use only glue sticks of the specified diameter (0.27" / 7mm).
- Do not pull out the melting glue stick from the glue gun after work is finished. Keep it inside for next use.
- The glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.
- Желим тапанчаны сууга же башка суюктуктарга батырбаңыз.
- Желим мылтыгыны d ичинде колдонбоңузamp же нымдуу шарттар.
- Only use the provided Type-C charging cable or a compatible 5V 1A input charger.
5. Орнотуу
5.1 Charging the Glue Gun
Before first use, fully charge the glue gun. The 2500mAh lithium battery provides long-lasting power.
- Connect the provided Type-C charging cable to the Type-C Charging Port on the glue gun.
- Connect the other end of the cable to a 5V 1A power source, such as a power bank, computer USB socket, or car USB socket.
- The LED Indicator will show the charging status. A red light indicates charging, and a green light indicates a full charge.
5.1-сүрөт: Charging the glue gun via a Type-C cable. The LED indicator shows charging status.
5.2 Inserting a Glue Stick
Ensure the glue gun is off before inserting a new glue stick.
- Insert a 0.27" (7mm) diameter mini glue stick into the Glue Stick Insertion Point at the rear of the gun.
- Push the glue stick in until it stops. Do not force it.
5.2-сүрөт: Step 1 of operation: Inserting a glue stick.
6. Иштөө нускамалары
6.1 Күйгүзүү жана жылытуу
- Press and hold the ON/OFF Switch for 3 seconds to turn on the glue gun. The LED Indicator will light up red, indicating it is heating.
- Allow approximately 90 seconds for the glue gun to preheat. The LED Indicator will change from red to green when it is ready for use.
6.1-сүрөт: The glue gun heating process, showing the red LED indicator and the 90-second heating time.
6.2-сүрөт: Visual guide for operating the glue gun, from inserting the stick to pulling the trigger.
6.2 Applying Glue
Once the LED Indicator is green, the glue gun is ready to dispense glue.
- Position the nozzle close to the surface where glue is needed.
- Gently pull the Trigger Lever to dispense melted glue. The glue gun has a fast glue output of 0.14 oz/min.
- Release the trigger to stop the flow of glue.
- The less-drip nozzle design helps reduce glue spillage.
6.3-сүрөт: Comparison showing the superior glue output and clarity of the WORKPRO glue gun.
6.3 Automatic Safety Power-Off
For safety and energy saving, the glue gun will automatically power off if not used for 8 minutes. To resume operation, simply press the ON/OFF switch again.
7. Техникалык тейлөө
- Тазалоо: Ensure the glue gun is completely cool before cleaning. Use a dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
- Сактагыч: Store the glue gun in a cool, dry place, away from direct sunlight and moisture. Ensure it is fully charged before long-term storage.
- Glue Sticks: Do not remove a partially used glue stick from the gun. Leave it in for the next use to prevent damage to the feeding mechanism.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Glue gun not heating up. | Батарея аз же өлүп калды. Туура эмес күйгүзүлгөн. | Charge the glue gun fully. Press and hold the ON/OFF switch for 3 seconds. |
| No glue dispensed when trigger is pulled. | Клей таякча толук салынган эмес. Not heated sufficiently. | Push the glue stick further into the insertion point. LED индикатору жашыл түскө күйгөнчө күтө туруңуз. |
| Glue gun automatically turns off. | Automatic safety power-off activated. | This is a safety feature. Press the ON/OFF switch again to restart. |
| Желим ашыкча тамчылап кетет. | Overheating (unlikely due to auto-off) or incorrect glue stick. | Ensure you are using 0.27" (7mm) mini glue sticks. The design is less-drip, but some minimal dripping can occur. |
9. Техникалык шарттар
- Модел: W125235
- Тtage: 3.6 вольт
- Ватtage: 9 ватт
- Батарея: 2500mAh литий-ион (кошулган)
- Заряддоо киргизүү: 5V 1A (С түрү)
- Жылытуу убактысы: Болжол менен 90 секунд
- Клей чыгаруу: ≥0.14 oz/min
- Шайкеш клей таякчасынын диаметри: 0.27 дюйм (7мм)
- Автоматтык түрдө өчүрүү: 8 мүнөт аракетсиздик
- Элемент Салмагы: 1.1 фунт
- Өлчөмдөрү: 8.11 x 7.52 x 2.13 дюйм (Пакеттин өлчөмдөрү)
- Шайкеш материалдар: Wood, Ceramic, Metal, Stone, Plastics, Paper products, Textiles, Shells
- UPC: 820909689782
9.1-сүрөт: Key dimensions of the WORKPRO Cordless Hot Glue Gun.
10. Расмий продукт Videos
Учурда кыстаруу үчүн сатуучу тарабынан түзүлгөн расмий видеолор жеткиликтүү эмес.
11. Кепилдик жана колдоо
Кепилдик маалыматы же техникалык колдоо үчүн WORKPRO кардарларды тейлөө кызматына кайрылыңыз. Продукциянын таңгагын же расмий WORKPROну караңыз webбайланыш маалыматы үчүн сайт.
Webсайт: www.workprotools.com
