1. Киришүү
This manual provides detailed instructions for the installation, operation, and programming of your DieseRC 433Mhz RF Wireless Remote Control Switch. This 2-channel AC relay receiver is designed to control various electrical devices and motors remotely, offering convenience and flexibility. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Пакеттин мазмуну
Пакет төмөнкү нерселерди камтышы керек:
- 1x DieseRC 433Mhz RF Relay Receiver Module
- 1x Protective Casing for Receiver Module
- 2x 2 баскычтуу алыстан башкаруу пульту
1-сүрөт: Components of the DieseRC RF Wireless Remote Control Switch kit.
3. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | DieseRC |
| Модель номери | 2 Бутондор |
| Байланыштар | Зымсыз |
| Терминал түрү | Clamp |
| Шайкеш түзмөктөр | AC |
| Алыскы батареянын түрү | Lithium Manganese Dioxide (CR2032) |
| Иштөө режимдери | Momentary, Toggle, Latched |
| Max Power | 2500 Ватт |
| Working Voltage | AC 85V-250V |
| Output Voltage | 1V-250V |
| Учурдагы рейтинг | 10A |
| Байланыш материалы | Жез |
| Байланыш түрү | Адатта ачык (ЖОК) |
| Монтаж түрү | Дубалга орнотуу |
| Жыштык | 433 МГц |
| Code Type | 1527 Learning Code or 2262 Fixed Code |
4. Коопсуздук нускамалары
- Электр коркунучу: Always disconnect power before installing or servicing the device. Improper wiring can lead to electric shock or fire.
- Квалификациялуу кадрларды: Орнотуу квалификациялуу электрик же билимдүү адам тарабынан жүргүзүлүшү керек.
- Тtage Шайкештик: Иштетүү көлөмүн камсыз кылууtage of your device matches the specifications of this receiver (AC 85V-250V).
- Жүктөө жөндөмдүүлүгү: Do not exceed the maximum current rating of 10A or power rating of 2500W.
- Курчап турган чөйрө: Install the receiver in a dry, well-ventilated area, away from direct sunlight, high temperatures, and corrosive environments.
- Балдар: Keep remote controls and the receiver out of reach of children.
5. Орнотуу жана зымдар
The receiver module features input terminals (N, L) for power supply and output terminals (NO, COM, NC) for connecting your device. Refer to the wiring diagrams below for common applications.
5.1 Terminal Definitions
- N: Нейтралдуу зым киргизүү
- L: Түздүү зым киргизүү
- ЖОК: Normally Open contact (connects to COM when activated)
- COM: Жалпы байланыш
- NC: Normally Closed contact (connects to COM when deactivated)
5.2 Электр байланыш схемалары
Below are typical wiring configurations for various devices. Always ensure power is disconnected before making any connections.
2-сүрөт: Four common wiring modes for the receiver module.
- AC Device: Connect the live wire from the power source to the 'L' input. Connect the neutral wire from the power source to the 'N' input. For the device, connect one wire to 'COM' and the other to 'NO'.
- DC Device: Connect the AC power source to 'L' and 'N' inputs. Connect the DC power supply output to the 'COM' and 'NO' terminals, ensuring correct polarity for your DC device.
- AC Motor (e.g., for rolling shutters): Connect the AC power source to 'L' and 'N' inputs. Connect the motor's 'Up' wire to one 'NO' terminal and 'Down' wire to the other 'NO' terminal. Connect the motor's common wire to the corresponding 'COM' terminals. Ensure proper grounding.
- DC мотор: Connect the AC power source to 'L' and 'N' inputs. Connect the DC power supply output to the 'COM' terminals. Connect the motor's positive and negative wires to the 'NO' terminals.
5.3 Колдонмо Examples
3-сүрөт: Remote control for garage doors.
4-сүрөт: Remote control for lighting systems.
6. Иштөө режимдери
The receiver supports three operating modes: Momentary, Toggle, and Latched. Each mode offers different control behavior for your connected devices.
5-сүрөт: Visual representation of operating modes.
6.1 Momentary Mode
In Momentary mode, the relay is activated only while the remote control button is pressed and held. Releasing the button deactivates the relay. This mode is suitable for applications like electric door locks or temporary power supply.
6.2 Которуу режими
In Toggle mode, pressing the remote control button once activates the relay, and it remains active. Pressing the same button again deactivates the relay. This mode is ideal for controlling lights or other devices that require a persistent ON/OFF state.
6.3 Latched Mode
In Latched mode, pressing button 'A' on the remote activates Relay 1. Pressing button 'B' on the remote activates Relay 2 and simultaneously deactivates Relay 1. This mode is useful for applications where only one of two relays should be active at any given time, such as controlling the up/down movement of a motor where both directions should not be active simultaneously.
7. Алыстан башкарууну программалоо
To pair your remote control with the receiver and set the desired operating mode, follow these steps:
6-сүрөт: Remote control programming steps.
- Режимди тандоо: Press the learning button on the receiver module a specific number of times according to the desired mode:
- үчүн Убактылуу режим: Press the learning button 1 жолу.
- үчүн Которуу режими: Press the learning button 2 жолу.
- үчүн Жабылган режим: Press the learning button 3 жолу.
- Алыстан башкаруу: Within approximately 3 seconds after the indicator light flashes, press the 'A' button on your remote control. The indicator light will flash again to confirm successful pairing for the first relay.
- Pair Second Button (if applicable): If you are using a 2-channel setup (e.g., for Latched mode), press the 'B' button on your remote control. The indicator light will flash again to confirm successful pairing for the second relay.
- Сыноо: Test the remote control to ensure the desired operating mode is correctly set.
8. Кабыл алгычты баштапкы абалга келтирүү
To clear all programmed remote controls from the receiver, follow these steps:
7-сүрөт: Resetting the receiver module.
- Кабыл алуучу модулундагы үйрөнүү баскычын басыңыз 8 жолу катары менен.
- The indicator light will flash rapidly and then turn off, indicating that all stored remote control codes have been cleared.
After a reset, you will need to reprogram your remote controls following the steps in Section 7.
9. Remote Control Details
The remote control features two buttons (A and B) and is powered by a CR2032 lithium cell battery.
8-сүрөт: Components of the 2-button remote control.
9.1 Батареяны алмаштыруу
If the remote control's range decreases or it stops responding, the battery may need replacement. To replace the battery:
- Алыстан башкаруу пультун c этияттык менен ачыңызasing.
- Эски CR2032 батареясын алып салыңыз.
- Жаңы CR2032 батареясын оң (+) тарабын өйдө каратып салыңыз.
- Алыстан башкаруу пультун c жабыңызasing коопсуз.
10. Кыйынчылыктарды
- Түзмөк жооп бербей жатат:
- Check all wiring connections for security and correctness.
- Ресивер күйгүзүлгөнүн текшериңиз.
- Алыстан башкаруу пультунун батареясы түгөнүп калбаганын текшериңиз.
- Reprogram the remote control to the receiver (see Section 7).
- Кыска иштөө диапазону:
- Пульттун батареясын алмаштырыңыз.
- Ensure there are no significant obstructions (e.g., thick walls, metal objects) between the remote and the receiver.
- Avoid installing the receiver near large metal structures or other RF interference sources.
- Relay clicks but device does not activate:
- Check the wiring between the receiver's output terminals (NO, COM, NC) and your device.
- Ensure the device itself is functioning correctly when directly powered.
11. Техникалык тейлөө
The DieseRC RF Wireless Remote Control Switch requires minimal maintenance. Keep the receiver module and remote controls clean and dry. Avoid exposing them to extreme temperatures, humidity, or corrosive substances. Do not attempt to repair the internal components yourself; contact qualified personnel if service is required.
12. Кепилдик жана колдоо
For warranty information or technical support, please refer to the product packaging or contact DieseRC customer service through your retailer. Keep your purchase receipt as proof of purchase.
