1. Киришүү
This manual provides detailed instructions for the safe and effective use of your ALLmeter Pen Type Digital Multimeter, Model B0C4SRMFMD. This device is designed for measuring AC/DC voltage, resistance, diode, and continuity. It also features non-contact voltage (NCV) detection and live wire identification. Please read this manual thoroughly before operation and retain it for future reference.
2. Коопсуздук маалыматы
WARNING: Electrical shock hazard. Improper use of this meter can cause injury or death. Follow all safety precautions.
- Always ensure the meter is in good working condition before use. Inspect for any damage to the casing or test leads.
- Көлөмдү өлчөөгө аракет кылбаңызtages же токтун белгиленген максималдуу чегинен ашуусу.
- Exercise extreme caution when working with live circuits. Always assume circuits are live until verified otherwise.
- Коопсуздук көз айнеги жана изоляцияланган кол кап сыяктуу тиешелүү жеке коргонуу каражаттарын (ЖКК) кийиңиз.
- Do not use the meter in wet environments or if your hands are wet.
- Иштөө алдында батарея отсеги бекем жабылганын текшериңиз.
- Бул түзмөк AC вольту үчүн иштелип чыкканtage detection in NCV mode and cannot measure DC current.
3. Продукт бүтүп калдыview
Familiarize yourself with the components of your ALLmeter Pen Type Digital Multimeter:
3.1-сүрөт: Labeled diagram of the ALLmeter Pen Type Digital Multimeter. Key components include the Input COM, Portable pen hook, Select key, HOLD key, N/L/P key, Display LCD, Signal strength indicator, LED light, and Test pen tip.
4. Орнотуу
4.1 Батареяны орнотуу
The ALLmeter Pen Type Digital Multimeter requires one AAA battery (included). To install or replace the battery:
- Locate the battery compartment cover, typically at the rear or top of the device.
- Капкакты ачыңыз.
- Туура полярдуулукту (+/-) текшерип, бир AAA батарейкасын салыңыз.
- Батарея уясынын капкагын бекем жабыңыз.
The device includes a low-battery indicator on the LCD display to signal when replacement is needed.
5. Иштөө нускамалары
5.1 Күйгүзүү/өчүрүү
Press the 'Select' button to power on the device. The device will automatically power off after 15 minutes of inactivity to conserve battery life.
5.2 Automatic Measurement Function
In automatic mode, the meter intelligently detects the type of measurement (DC/AC voltage or resistance) and displays the value. This simplifies the measurement process by eliminating the need to manually select ranges.
5.1-сүрөт: Examples of automatic measurement displays for AC voltage, DC томtage, and resistance (Ohm).
5.3 Manual Functions (Electric Field and Live Wire Detection)
Pressing the 'N/L' button cycles through additional functions. Note that in these modes, only AC can be measured, not DC.
5.2-сүрөт: Displays for Electric Field (EF) and Live Wire (LIVE) detection modes.
- EF (Electric Fields): This mode detects electric fields without requiring a ground wire. Bring the tip close to a wire to detect if it is live.
- LIVE (Live Wire): In this mode, the device functions as an AC detector. Touch the tip to a wire, and it will beep if the wire is live.
5.4 Диодду өлчөө
To measure a diode:
- Press the 'Select' button repeatedly until the diode symbol appears on the screen.
- Connect the test leads to the diode.
5.3-сүрөт: Measuring a diode on a circuit board using the multimeter.
5.5 Үзгүлтүксүздүк тести
The continuity test checks for an unbroken path in a circuit. If a continuous path is detected, the meter will emit an audible beep.
5.6 Контактсыз томtage (NCV) аныктоо
The NCV feature allows for safe detection of AC voltage without direct contact. The device will indicate the presence of AC voltage within a range of 12V-1000V. In NCV mode, it can only detect alternating current (AC) and cannot measure direct current (DC).
5.4-сүрөт: Using the NCV function and LED light in a low-light environment.
5.7 Data Hold (HOLD Key)
Дисплейдеги учурдагы көрсөткүчтү тоңдуруп коюу үчүн 'HOLD' баскычын басыңыз. Кармоо функциясын бошотуу үчүн аны кайра басыңыз.
5.8 LED чырак
The built-in LED light can be activated to illuminate dimly lit work areas. Refer to the product overview for the location of the LED light.
6. Тиркемелер
The ALLmeter Pen Type Digital Multimeter is suitable for various electrical testing scenarios:
6.1-сүрөт: Examples of multi-function usage, including testing electrical outlets and circuit breaker panels.
6.2-сүрөт: Testing electrical components within a car engine.
7. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | B0C4SRMFMD |
| Дисплей | LCD, 6000 Counts |
| AC/DC Voltage Диапазон | Automatic scanning test (DC/AC 6V, 60V, 600V) |
| Каршылык диапазону | 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ |
| Байланышсыз томtage (NCV) аныктоо | 12V-1000V AC |
| Power Source | 1 x AAA Батарея (кошулган) |
| Авто өчүрүү | 15 мүнөт аракетсиздик |
| Өлчөмдөр | 8.11 x 2.24 x 1.34 дюйм |
| Салмагы | 4.23 унция |
| Түс | Кара |
8. Техникалык тейлөө
- Тазалоо: Wipe the meter with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Сактагыч: Узак убакыт бою колдонулбаган учурда, агып кетпеши үчүн батареяны алып салыңыз. Эсептегичти салкын, кургак жерде, күндүн түз нурунан жана өтө жогорку температурадан алыс сактаңыз.
- Батареяны алмаштыруу: Replace the AAA battery when the low-battery indicator appears on the display.
9. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Эсептегич күйбөйт | Өлүк же туура эмес орнотулган батарея | Батареянын полярдуулугун текшериңиз же жаңы AAA батареясы менен алмаштырыңыз. |
| Так эмес окуулар | Low battery; incorrect mode selection; environmental interference | Replace battery; ensure correct mode is selected; move away from strong electromagnetic fields. |
| NCV mode not detecting DC | NCV mode is designed for AC only | This is normal operation. The NCV mode only detects alternating current (AC). |
| Дисплейде "OL" көрсөтүлөт | Overload or open circuit | The measured value exceeds the range, or there is no connection. Check the circuit or range. |
10. Пакеттин мазмуну
The ALLmeter Pen Type Digital Multimeter package includes:
- ALLmeter Pen Type Digital Multimeter
- 1.5V AAA Батарея
- Сыноочу
10.1-сүрөт: The included test lead for various measurements.
11. Кепилдик жана колдоо
For warranty information or technical support, please refer to the documentation provided with your purchase or contact ALLmeter customer service directly. Contact details are typically available on the manufacturer's official webсайт же продукт таңгак.
