1. Киришүү
Thank you for choosing the FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank. This device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.
Image 1.1: The FLYLINKTECH BD10 Jump Starter unit with its smart battery clamps.
2. Коопсуздук маалыматы
Түзмөккө же унаага жаракат алуунун же бузулуунун алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Тоңуп калган батареяны секирип баштоого аракет кылбаңыз.
- Туура полярдуулукту камсыз кылыңыз (кызыл түстөгүamp оң, кара клamp to negative). Reverse polarity can cause damage.
- Do not allow the smart clamps to touch each other when connected to the jump starter.
- Аппаратты балдардан алыс кармаңыз.
- Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
- Аппаратты ажыратпаңыз же өзгөртпөңүз.
- Берилген акылдуу кулпуну гана колдонуңузamps and charging cables.
- If the device becomes excessively hot during use, disconnect it immediately.
Image 2.1: The jump starter incorporates multiple safety features such as spark-proof, reverse polarity, overvoltage, short circuit, overload, and high-temperature protection.
3. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- FLYLINKTECH BD10 Jump Starter Unit
- Акылдуу батарея Clamps
- USB-C - USB-C кабели
- USB-A - USB-C кабели
- 12V DC унаа заряддагыч адаптер
- User Manual
- Сактоочу куту
Image 3.1: The complete package includes the jump starter, smart clamps, various cables, user manual, and a protective storage case.
4. Орнотуу жана заряддоо
4.1 Баштапкы төлөм
Before first use, fully charge the jump starter. The device features a 26800mAh battery capacity.
- Connect the provided USB-C cable to the jump starter's USB-C input port.
- Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a PD 45W charger.
- The LED screen will display the charging status and battery percentage.
4.2 Заряддоо убакыттары
| Заряддагыч рейтинги | Болжолдуу заряддоо убактысы |
|---|---|
| 5W | 18 саат |
| 18 Вт | 7 саат |
| 45 Вт | 2 саат |
Note: A 45W wall charger is not included in the package.
Image 4.1: The device supports PD 45W fast charging, significantly reducing recharge time when using a compatible charger.
5. Иштөө нускамалары
5.1 Унаанын секирип от алдыруу
The FLYLINKTECH BD10 is capable of jump-starting all gas engines and diesel engines up to 12.0L.
- Ensure Sufficient Charge: Check the jump starter's LED screen to ensure it has at least 50% charge.
- Connect Smart Clamps: Insert the blue plug of the smart clamps into the jump starter's 12V output port. Ensure a firm connection.
- Унаа батареясына туташуу:
- тиркөө кызыл (+) clamp унаанын оң батарея терминалына туташтырыңыз.
- тиркөө кара (-) clamp унаанын терс батарея терминалына.
- Текшерүү көрсөткүчү: акылдуу clamp indicator light should turn solid green, indicating a correct connection. If it flashes or shows red, check connections and battery status.
- Press BOOST (if needed): If the vehicle battery is extremely low or completely dead, press the 'BOOST' button on the jump starter. Wait for the indicator light on the smart clamps to turn solid green.
- Унаа баштоо: Attempt to start your vehicle. If it doesn't start on the first try, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
- Clamps: Once the vehicle starts, immediately remove the smart clamps from the car battery, then disconnect them from the jump starter.
Image 5.1: The jump starter connected to a car battery, ready for operation. It supports 6000A peak current, 12V output, and is suitable for a wide range of engines.
Image 5.2: Visual guide illustrating the four steps to jump-start a vehicle: connect the plug, attach clamps, press boost, and start the engine.
5.2 Power Bank функциясы
The BD10 can charge multiple electronic devices via its USB-A and USB-C ports.
- USB1 чыгышы: Up to 18W (max)
- USB2 чыгышы: Up to 18W (max)
- USB-C чыгышы: Up to 45W (PD)
Connect your device using the appropriate USB cable to the desired output port. The LED screen will show 'OUT' and the wattage being drawn.
Image 5.3: The jump starter functioning as a power bank, simultaneously charging a smartphone and a tablet via its USB ports.
5.3 LED чырак
The built-in LED flashlight offers three modes: constant light, SOS signal, and strobe light.
- Press and hold the flashlight button to turn on the constant light.
- Press the button again to cycle through SOS and strobe modes.
- Өчүрүү үчүн кайра басып кармап туруңуз.
Image 5.4: The integrated LED flashlight provides illumination, an SOS signal, and a strobe function for emergency situations.
5.4 Informative LED Screen
The 6.0-inch LED screen provides real-time information about the device's status:
- Батарея деңгээли: Калган батареянын пайызын көрсөтөтtage.
- IN/OUT Indicator: Shows whether the device is charging (IN) or discharging (OUT).
- Ватtage Дисплей: Indicates the power (W) being drawn or supplied.
- Ката эскертүүлөрү: Displays specific error codes or symbols if an issue occurs.
Image 5.5: The 6.0-inch LED screen provides clear information on battery percentage, input/output status, and power consumption.
6. Техникалык тейлөө
- Үзгүлтүксүз заряддоо: To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
- Сактагыч: Store the device in its protective case in a cool, dry place, away from direct sunlight and moisture.
- Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү материалдарды колдонбоңуз.
- Clamp Кам көрүү: акылдуу cl камсыз кылууampар бир колдонуудан мурун жана андан кийин таза жана коррозиясыз.
7. Кыйынчылыктарды
The device features multiple alarm situations indicated by audible signals and screen displays:
- Low Voltage Коргоо: Audible signal "3". Recharge the device.
- Тышкы томtage Exceeds Vehicle Voltage: Audible signal "4". Check vehicle battery voltage.
- Кыска туташуулардан коргоо: Audible signal "5". Check clamp connections for short circuits.
- Safety Mode Activated: Audible signal "6". Device has entered safety mode due to an issue.
- Ашыкча ток коргоо: Audible signal "7". Reduce load or check connections.
- Жогорку/Төмөн Температура Ойготкуч: Audible signal "8". Allow device to return to operating temperature range (-20°C to 60°C).
- Reverse Connection: Audible signal "9". Correct the clamp полярдуулук.
Сүрөт 7.1: Бүттүview of the device's multi-alarm system, indicating various protection states with unique audible signals.
Эгерде бул кадамдарды аткаргандан кийин көйгөйлөр чечилбесе, кардарларды колдоо кызматына кайрылыңыз.
8. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | FLYLINKTECH |
| Модел | BD10 |
| Чыгуу токунун чокусу | 6000 Ampere |
| Батарея сыйымдуулугу | 26800mAh |
| Output Voltage | 12V |
| USB-C Киргизүү/Чыгуу | PD 45W |
| USB-A чыгаруу | 18 Вт (максимум) |
| Applicable Engine Types | All Gas, up to 12.0L Diesel |
| Иштөө температурасы | -20°Cден 60°Cге чейин (-4°Fтен 140°Fге чейин) |
| Продукциянын өлчөмдөрү | 23.95 x 10 x 5.69 см |
| Элемент Салмагы | 920 г |
Image 8.1: The device is designed to operate reliably in extreme climates, from -20°C (-4°F) to 60°C (140°F).
9. Кепилдик жана колдоо
FLYLINKTECH is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webсайт. Сураныч, кепилдик максаттары үчүн сатып алганыңыздын далилин сактап коюңуз.
