NDI KC-316MIX 7-in-1 Moisture Meter Instruction Manual

1. Киришүү

This manual provides detailed instructions for the safe and effective operation of your NDI KC-316MIX 7-in-1 Moisture Meter. This versatile device is designed to accurately measure moisture content in various materials using both pin-type and non-invasive (pinless) methods. It also provides ambient temperature, humidity, and a mildew index, making it an essential tool for homeowners, contractors, and professionals.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Кош өлчөө режимдери: Pin-type for precise readings and pinless for quick surface scans.
• Multiple Material Modes: Dedicated settings for Softwood, Hardwood, Dry Wall, and Cement Board.
• Environmental Readings: Displays ambient temperature and humidity.
• Mildew Index: Provides an indication of potential mildew growth.
• Колдонуучуга ыңгайлуу интерфейс: Large LCD screen with clear display and intuitive controls.

Figure 1: NDI KC-316MIX 7-in-1 Moisture Meter. This image shows the overall design of the device, highlighting its ergonomic handle and large digital display.

Figure 2: ашыкview of the 7-in-1 features including Pin + Pin-less, Soft Wood, Hard Wood, Building Material, Dry Wall, Ambient Temperature, and Mildew Indication.

2. Коопсуздук маалыматы

Please read and understand all safety warnings and operating instructions before using this device. Failure to do so may result in electric shock, fire, or serious injury.

• Батареянын коопсуздугу: Use only the specified battery type (2 x AAA). Do not mix old and new batteries. Ensure correct polarity. Remove batteries if the device will not be used for an extended period.
• Пробдун коопсуздугу: The pin-type probes are sharp. Handle with care to avoid injury. Keep the protective cap on when not in use.
• Электрдик коркунучтар: Do not use the device on live electrical circuits or materials that may contain live wires.
• Экологиялык шарттар: Do not expose the device to extreme temperatures, high humidity, or direct sunlight. Avoid using in explosive atmospheres.
• Тейлөө: Аппаратты ажыратууга же өзгөртүүгө аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.

3. Орнотуу

3.1. Батареяны орнотуу

The NDI KC-316MIX requires 2 x AAA batteries (included) for operation.

1. Locate the battery compartment cover at the bottom of the device handle.
2. Open the cover by sliding it downwards or unlatching it as indicated.
3. Бөлүмдүн ичинде белгиленгендей, туура полярдуулукту (+/-) текшерип, эки AAA батарейкасын салыңыз.
4. Батарея уясынын капкагын бекем жабыңыз.

Video 1: NDI 7-in-1 Pin-Type and Non-invasive Moisture Meter Scanner. This video demonstrates the battery installation process and initial power-on sequence.

3.2. Removing Probe Protection Sleeve (for Pin-Type Mode)

When using the pin-type measurement mode, the protective sleeve must be removed from the probes.

1. Gently pull the gray protective cap upwards to expose the metal pins.
2. Carefully remove the small black protective sleeves from each metal pin. Store these sleeves in a safe place to prevent loss.
3. After use, replace the protective sleeves and cap to prevent damage to the probes and accidental injury.

Figure 3: This image illustrates correct and incorrect operation methods for the moisture meter, emphasizing proper contact with the surface.

4. Иштөө нускамалары

4.1. Күйгүзүү/өчүрүү

Аппаратты күйгүзүү үчүн басып, кармап туруңуз Күч button (red button) for approximately 1 second. The LCD screen will illuminate. To power off, press and hold the Күч button again until the screen turns off. The device features an auto power-off function to conserve battery life.

4.2. LCD дисплейди түшүнүү

The large LCD screen displays various readings and indicators:

• Moisture Level: Процент катары көрсөтүлгөнtage (%).
• Mildew Index: A bar graph indicating the risk of mildew (Dry, Slight Humidity, Excessive Humidity).
• Material Mode: Indicates the currently selected material (e.g., WOOD, BLDG, DRY WALL, CEMENT BOARD, SOFT WOOD, HARD WOOD).
• Айлана-чөйрөнүн температурасы: Displays in °C or °F.
• Салыштырмалуу нымдуулук (RH): Displays as a percentage (%).
• Батарея көрсөткүчү: Калган батареянын иштөө мөөнөтүн көрсөтөт.
• кармап туруу функциясы: Indicated by a lock symbol when active.

4-сүрөт: Детальдуу view of the LCD display, showing all indicators and readings including moisture percentage, mildew index, material type, temperature, and humidity.

4.3. Switching Measurement Modes

басыңыз РЕЖИМ button to cycle through the available material types for measurement:

• Dry Wall Mode
• Cement Board Mode
• Soft Wood Mode
• Hard Wood Mode
• Building Material Mode (for pin-type)
• Wood Mode (for pin-type)

4.4. Non-invasive (Pinless) Measurement

This mode allows for quick and non-damaging moisture detection on surfaces.

1. Ensure the protective cap is closed over the pins (if using pinless mode).
2. Select the appropriate material mode using the РЕЖИМ баскычы.
3. Place the sensor pad (at the top of the device) flat against the surface of the material you wish to measure. The device's unique angle sensor design ensures partial contact, protecting the object from scratches.
4. The moisture reading will be displayed instantly on the LCD screen.

Figure 5: Demonstrates pinless measurement on a wood surface. The device's smaller contact surface minimizes the risk of damage during measurement.

Figure 6: Pinless measurement being performed on a dry wall surface.

Figure 7: Pinless measurement being performed on a soft wood surface.

Figure 8: Pinless measurement being performed on a cement board surface.

Figure 9: Pinless measurement being performed on a hard wood surface.

4.5. Pin-Type Measurement

This mode provides specific numerical readings for pinpointed spots.

1. Remove the protective cap and the small protective sleeves from the metal pins (refer to Section 3.2).
2. Экөөнү тандаңыз Жыгач or BLDG (Building Material) mode using the РЕЖИМ баскычы.
3. Carefully insert the metal pins into the material you wish to measure. Ensure good contact.
4. The moisture reading will be displayed instantly on the LCD screen.

Figure 10: Demonstrates pin-type measurement on a wood surface. The pins are inserted into the material for direct contact.

Figure 11: Pin-type measurement being performed on a building material surface.

Video 2: Pinless & Pin-type Moisture Meter KC-316MIX. This video provides a demonstration of both pinless and pin-type measurement methods.

4.6. Маалыматты кармоо функциясы

басыңыз БЕРҮҮ button (yellow button) to freeze the current reading on the display. This is useful for taking readings in hard-to-reach areas. Press the БЕРҮҮ көрсөткүчтү чыгаруу үчүн баскычты кайрадан басыңыз.

4.7. Buzzer On/Off and Temperature Unit Switch

The SET button allows you to configure certain settings:

• Коңгуроо: басыңыз SET button briefly to toggle the audible buzzer on or off. The buzzer provides an alert when high moisture levels are detected.
• Температура бирдиги: басып, кармап туруңуз SET button to switch the ambient temperature display between Celsius (°C) and Fahrenheit (°F).

5. Техникалык тейлөө

• Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Сактагыч: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the protective cap is on the pins.
• Батареяны алмаштыруу: Replace batteries when the low battery indicator appears on the display. Remove batteries if storing for extended periods.
• Пробка кам көрүү: Keep the metal pins clean and free from debris. If they become dull or damaged, they may affect accuracy.

6. Кыйынчылыктарды

7. Техникалык шарттар

• Модель номери: KC-316MIX
• Бренд: NDI
• Кубат булагы: Battery Powered (2 x AAA Alkaline)
• Элемент Салмагы: 11.7 унция
• Пакеттин өлчөмдөрү: 10.43 x 4.92 x 2.91 дюйм
• Түсү: Боз
• Материал: Пластик
• Камтылган компоненттер: Батарея пакети
• Measurement Depth (Non-invasive): Up to 3/4 Inch
• Атайын режимдер: Softwood, Dry Wall, Cement Board, Hardwood, Mildew Index Indicator Bar

Figure 12: Table showing inductive (pinless) moisture indication levels for Dry State, Slight Humidity, and Excessive Humidity.

Figure 13: Table showing needle (pin-type) moisture indication levels for Wood and Building Material, categorized by Dry State, Slight Humidity, and Excessive Humidity.

8. Кепилдик жана колдоо

NDI products are manufactured to high-quality standards. For warranty information and customer support, please refer to the documentation included with your product or visit the official NDI webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

For additional assistance, please contact NDI customer service.