WORKPRO 258 даанадан турган кызгылт түстөгү тиричилик шаймандарынын топтому боюнча колдонмо

Introduction

This manual provides essential information for the safe and effective use, setup, and maintenance of your WORKPRO 258-Piece Pink Household Tool Set. This comprehensive toolkit is designed for various home repair and DIY tasks, offering a wide range of tools crafted for durability and ease of use.

Figure 1: The WORKPRO 258-Piece Pink Household Tool Set, neatly organized within its durable carrying case.

Компоненттер бүттүview

Your WORKPRO 258-Piece Household Tool Set includes a variety of essential tools for common household tasks. All tools feature comfortable bi-material grips and are made from high-strength materials like CRV steel for durability.

Key Tools Included:

• Балка: 12 oz fiberglass hammer with a shock-absorbing grip for comfortable use.
• Кычкач: Includes 6-inch slip-joint pliers and 6-inch long nose pliers, drop-forged carbon steel with nickel plating.
• Жөнгө салынуучу ачкыч: 6-inch adjustable wrench, drop-forged and heat-treated steel with chrome plating.
• Screwdrivers: A selection of Phillips and flathead screwdrivers, including precision screwdrivers and a multi-bit screwdriver with magnetic tips and various driver bits.
• Рулетка: 10 ft / 3m tape measure with large width and dual markings (SAE and metric).
• Деңгээл: 9-inch torpedo level with magnets for easier leveling.
• Пайдалуу бычак: Snap-off knife with durable, sharp, and smoothly retracting blades, includes 10 extra SK5 blades.
• Hex Key Set: 8-piece hex key set made from CR-V steel with nickel plating.
• Кайчы: 8-1/2 inch hardened stainless steel scissors.
• Аппараттык комплект: 85-piece kit including screws, nails, and wall anchors.
• Кабелдик байланыштар: 100 pieces of nylon cable ties for sorting and organizing.

Figure 2: Essential measuring and striking tools: 12 oz hammer, 10 ft tape measure, 9-inch torpedo level, and 8-1/2 inch scissors.

Figure 3: Gripping and fastening tools: 6-inch slip-joint pliers, 6-inch long nose pliers, and 6-inch adjustable wrench.

Figure 4: Fastening tools: Phillips and flathead screwdrivers, precision screwdrivers, and an 8-piece hex key set.

Figure 5: Versatile multi-bit screwdriver with magnetic head and 40 commonly used driver bits.

Figure 6: Cutting and fastening accessories: Snap-off knife with extra blades, 100 nylon cable ties, and an 85-piece hardware kit.

Орнотуу жана уюштуруу

Your WORKPRO tool set comes in a durable, dirt-resistant plastic case with molded compartments. This design ensures tools are securely held in place, providing easy access and protection.

1. Пакеттен чыгаруу: Carefully open the case and remove all tools and accessories.
2. Текшерүү: Verify that all 258 pieces are present and in good condition. Refer to the product packaging or included list for a complete inventory.
3. Уюм: Place each tool back into its designated molded compartment within the case. This helps maintain organization and prevents tools from shifting during transport.
4. Сактагыч: Store the case in a dry, secure location, away from extreme temperatures and moisture, to prolong the life of your tools.

Иштөө нускамалары

Always prioritize safety when using any tool. Wear appropriate personal protective equipment (PPE) such as safety glasses and gloves when necessary.

Жалпы колдонуу көрсөтмөлөрү:

• Балка: Use for driving nails or light demolition. Ensure a firm grip and strike squarely. The claw end is for nail removal.
• Screwdrivers: Select the correct tip (Phillips or flathead) and size for the screw. Apply firm, steady pressure while turning to prevent stripping the screw head. The multi-bit screwdriver allows for quick bit changes.
• Кычкач: Use for gripping, bending, or cutting wires. Choose the appropriate type (slip-joint for general gripping, long nose for precision work).
• Жөнгө салынуучу ачкыч: Adjust the jaw to fit snugly around the fastener. Apply force in the direction of the fixed jaw to prevent slippage.
• Рулетка: Extend the tape to measure distances. Use the lock mechanism to hold the measurement.
• Торпедо деңгээли: Place the level on the surface to be checked. The bubble in the vial indicates if the surface is level (horizontal), plumb (vertical), or at a 45-degree angle. The magnetic base allows for hands-free use on metal surfaces.
• Пайдалуу бычак: Extend the blade only as far as needed for the cut. Always cut away from your body. Retract the blade fully when not in use. Replace dull blades promptly using the extra blades provided.
• Hex Key Set: Select the correct size hex key for hexagonal fasteners (e.g., for assembling furniture). Insert fully into the fastener before turning.

Эскертүү: Бул колдонмого киргизүү үчүн сатуучунун расмий видеолору жок.

Техникалык тейлөө

Proper maintenance ensures the longevity and optimal performance of your tools.

• Тазалоо: After each use, wipe down tools with a clean, dry cloth to remove dirt, dust, and moisture. For stubborn grime, a mild cleaner can be used, followed by thorough drying.
• Майлоо: Periodically apply a light coat of machine oil to moving parts of pliers and wrenches to ensure smooth operation and prevent rust.
• Сактагыч: Always return tools to their designated compartments in the case after use. This protects them from damage and keeps them organized. Store the case in a dry environment.
• Текшерүү: Regularly inspect tools for signs of wear, damage, or corrosion. Replace or repair damaged tools immediately to ensure safety and effectiveness. The CRV steel construction and anti-corrosive treatment help resist rust, but proper care is still essential.

Проблемаларды чечүү

Most issues can be resolved by ensuring correct tool selection and proper technique.

• Сыпалуу винттери: Ensure you are using the correct screwdriver tip size and type (Phillips/flathead) for the screw. Apply adequate downward pressure to prevent the tip from slipping.
• Бошоң бекиткичтер: For wrenches and pliers, ensure the tool jaws are adjusted tightly around the fastener to prevent rounding off edges.
• Жалбырттаган бычактар: Replace utility knife blades as soon as they become dull to ensure clean cuts and reduce effort.
• Tools Not Fitting: Double-check that you are using the correct size (e.g., hex key, screwdriver bit) for the specific fastener or task.

Техникалык шарттар

Кепилдик жана колдоо

For detailed warranty information, product support, or to inquire about replacement parts, please refer to the documentation included with your product or visit the official WORKPRO webсайт. Кардарларды тейлөө кызматынын байланыш маалыматын, адатта, продуктунун таңгагынан же өндүрүүчүнүн webсайт.