Dynasty PROAUDIO WSA-5RP-PLUS Wireless Surround Sound Speaker Kit User Manual

Introduction

Сүрөт: The Dynasty PROAUDIO WSA-5RP-PLUS Wireless Surround Sound Speaker Kit, showing the stacked Transmitter and Receiver units from the front with their power switches and status LEDs.

This manual provides detailed instructions for the installation, operation, and maintenance of your Dynasty PROAUDIO WSA-5RP-PLUS Wireless Surround Sound Speaker Kit. This system is designed to convert your passive rear surround speakers into a wireless setup, eliminating the need for long speaker cables. It features dual-band wireless technology for stable audio transmission and a built-in Class D ampдинамиктериңизди иштетүү үчүн көтөргүч.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз. Эгерде кандайдыр бир нерселер жок болсо же бузулса, кардарларды колдоо менен байланышыңыз.

Сүрөт: The image displays the complete package contents, including the transmitter, receiver, antennas, power adapters, speaker wires, and user manual, laid out next to the product box.

• 1 x WSA-5RP-PLUS Wireless Transmitter (TX)
• 1 x WSA-5RP-PLUS Wireless Receiver (RX)
• 2 x Wireless Antennas
• 2 x Speaker Wires
• 1 x 9V Power Adapter (for Transmitter)
• 1 x Power Cord (for Receiver)
• 1 х Колдонуучунун колдонмосу (бул документ)

Продукт бүттүview

The Dynasty PROAUDIO WSA-5RP-PLUS system consists of two main units: a Transmitter (TX) and a Receiver (RX).

Өткөргүч (TX) бирдиги

Сүрөт: Арткы панель view of both the Transmitter (top) and Receiver (bottom) units, showing all input and output ports, antennas, and controls.

The Transmitter unit sends audio signals wirelessly to the Receiver. It features:

• Антенна порту: For connecting the wireless antenna.
• Динамик деңгээлиндеги киргизүү: Connects to the speaker outputs of your A/V receiver or ampөмүрлүү.
• Stereo RCA Input (Line In): Connects to RCA line-level outputs from your A/V receiver or preamp.
• Subwoofer Input: For connecting a subwoofer signal from your A/V receiver.
• DC 9V киргизүү: For connecting the provided 9V power adapter.
• ATT Switch: Attenuation switch to adjust input sensitivity (0, -6, -12 dB).
• Кубат которгучу: On/Off toggle.
• Статус LED: Кубат жана байланыш абалын көрсөтөт.

Алуучу (RX) бирдиги

The Receiver unit receives wireless audio signals from the Transmitter and amplifies them for your passive speakers. It features:

• Антенна порту: For connecting the wireless antenna.
• Динамик чыгаруу терминалдары: Connects to your passive rear surround speakers (L+/L- and R+/R-). Supports banana plugs or bare wire.
• Сабвуфердин чыгышы: For connecting to an active subwoofer or subwoofer ampөмүрлүү.
• Режим которуу: Selects between Stereo, Bridge, or Mono output modes.
• Үн баскычы: Adjusts the output volume of the connected speakers.
• AC киргизүү: For connecting the provided AC power cord.
• Кубат которгучу: On/Off toggle.
• Статус LED: Кубат жана байланыш абалын көрсөтөт.

Сүрөт: Жакын план view of the Receiver's mode switch (Stereo, Bridge, Mono) and the volume control knob.

Сүрөт: Деталдаштырылган view of the speaker output terminals on the Receiver, showing L+ and L- for the left channel, and R+ and R- for the right channel, with a "BRIDGE" indicator.

Орнотуу нускамалары

Follow these steps to set up your wireless surround sound system.

1-кадам: Антенналарды туташтыруу

Screw the provided wireless antennas onto the ANT ports of both the Transmitter (TX) and Receiver (RX) units. Ensure they are securely tightened.

Step 2: Connect Transmitter (TX) to Your A/V Receiver/Ampөмүрлүү

Төмөнкү туташуу ыкмаларынын бирин тандаңыз:

1. Speaker Level Input (Recommended for A/V Receivers):
   • Connect the speaker wires from the rear surround speaker outputs of your A/V receiver/amplifier to the "SPEAKER LEVEL IN" terminals on the TX unit.
   • Ensure correct polarity (+ to + and - to -).
2. Stereo RCA Input (Line In):
   • Connect RCA cables from the line-level audio outputs (e.g., Zone 2 out, Pre-out) of your A/V receiver or preamp to the "LINE IN" RCA ports on the TX unit.
3. Subwoofer Input (Optional):
   • If you wish to transmit a subwoofer signal, connect an RCA cable from the subwoofer output of your A/V receiver to the "SUBWOOFER IN" port on the TX unit.

Эскертүү: Adjust the ATT switch on the TX unit if the input signal is too strong or too weak. Start with 0dB and adjust if distortion or low volume occurs.

Step 3: Connect Receiver (RX) to Passive Speakers

Connect your passive rear surround speakers to the "SPEAKER OUTPUT" terminals on the RX unit using speaker wires. Ensure correct polarity.

• For stereo operation, connect left speaker to L+/L- and right speaker to R+/R-.
• For bridged mono operation (e.g., for a single, more powerful speaker), connect to the BRIDGE terminals. Refer to your speaker's impedance for compatibility.

Optional Subwoofer Connection: If you connected a subwoofer input to the TX unit, you can connect an active subwoofer or subwoofer amplifier to the "SUBWOOFER OUT" port on the RX unit.

Сүрөт: A comprehensive diagram showing how to connect the Transmitter to an A/V receiver (speaker level or line level) and the Receiver to passive rear speakers and an optional subwoofer, including power connections.

4-кадам: Күйгүзүү

Connect the 9V power adapter to the TX unit and plug it into a power outlet. Connect the AC power cord to the RX unit and plug it into a power outlet. Turn on both units using their respective power switches.

Иштөө нускамалары

Жупташуу

The Transmitter and Receiver units are pre-paired at the factory. Upon powering on, the status LEDs on both units will blink blue and then turn solid blue, indicating a successful wireless connection. If they do not connect automatically, press the 'M' (Match) button on both units simultaneously for a few seconds until they pair.

Сүрөт: A close-up showing the blue LED indicator (top) and green LED indicator (bottom) on the units, which signify connection status.

Үндү тууралоо

Use the "VOLUME" knob on the Receiver (RX) unit to adjust the output level of your rear speakers. It is recommended to set the volume to a moderate level and then fine-tune it using your A/V receiver's speaker level calibration.

Mode Selection (RX Unit)

The RX unit features a mode switch:

• Стерео: Standard stereo output for two rear speakers (L/R).
• Көпүрө: Combines the two amplifier channels into a single, more powerful mono output. Use this for a single, higher-power speaker.
• Моно: Provides a mono output to both L and R channels.

Select the appropriate mode based on your speaker configuration.

Проблемаларды чечүү

Эгер көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:

Техникалык шарттар

Техникалык тейлөө

To ensure the longevity and optimal performance of your Dynasty PROAUDIO WSA-5RP-PLUS system, follow these maintenance guidelines:

• Тазалоо: Use a soft, dry cloth to clean the exterior surfaces of the units. Avoid using liquid cleaners, aerosols, or solvents.
• Вентиляция: Ensure that the ventilation slots on both units are not obstructed to prevent overheating.
• Курчап турган чөйрө: Operate the units in a dry environment, away from direct sunlight, heat sources, and excessive moisture.
• Күч: Disconnect power before cleaning or if the units will be unused for an extended period.

Кепилдик жана колдоо

For warranty information, please refer to the warranty card included with your product or contact DYNASTY PROAUDIO customer support directly. For technical assistance or further inquiries, please visit the official DYNASTY PROAUDIO webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.