Introduction
Thank you for choosing the Rocketfish Tilting TV Wall Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for 32-inch to 90-inch flat-panel televisions, this mount offers a secure and low-profile solution with convenient fingertip tilt adjustment for optimal viewing angles. Please read this manual thoroughly before beginning installation and retain it for future reference.
Image: Rocketfish Tilting TV Wall Mount, front view.
Коопсуздук маалыматы
Бул продуктуну туура эмес орнотуу же колдонуу олуттуу жаракатка же бузулууга алып келиши мүмкүн. Сураныч, төмөнкү коопсуздук чараларын сактаңыз:
- Бардык нускамаларды окуңуз: Ensure you understand all instructions and warnings before installation. If you have any questions, contact customer support.
- Салмак сыйымдуулугу: Do not exceed the maximum weight capacity of 130 lbs (59 kg). This mount is designed for TVs between 32 and 90 inches.
- Дубал түрү: This mount is designed for installation on wood stud walls or solid concrete/brick walls. Do not install on drywall alone.
- Кесиптик орнотуу: If you are unsure about your ability to install this mount safely, seek assistance from a qualified professional.
- Компонентти текшерүү: Орнотуудан мурун, бардык компоненттердин бар экенин жана бузулбаганын текшериңиз. Бузулган тетиктерди колдонбоңуз.
- Ашыкча катуулануудан сактаныңыз: Do not over-tighten screws, as this may cause damage to the mount or your TV.
- Балдар: Балдарды орнотуу аянтынан алыс кармаңыз.
Пакеттин мазмуну
Carefully unpack the box and ensure all items listed below are present and undamaged. If any parts are missing or damaged, do not attempt to install the mount. Contact Rocketfish customer support for assistance.
- Дубал плитасынын жыйындысы
- TV кронштейн колдору (2)
- Аппараттык комплект (ар кандай бурамалар, шайбалар, аралыктар, якорьлор)
- Instruction Manual
Орнотуу жана орнотуу
Талап кылынган куралдар (камтылган эмес)
- Филлипс баш бурагычы
- Drill with appropriate drill bits (wood or masonry)
- Stud Finder (жыгач шпилькаларды орнотуу үчүн)
- Деңгээл
- Карандаш
- Тасма өлчөгүч
- Балка (бетон анкерлер үчүн)
Орнотууга чейинки текшерүү тизмеси
- TV шайкештиги: Verify your TV's VESA mounting pattern and weight are within the mount's specifications (32"-90" and up to 130 lbs).
- Дубалдын түзүлүшү: Ensure the wall can safely support the combined weight of the mount and your TV.
- Жайгашкан жери: Choose a mounting location free from electrical wires, water pipes, or other hazards.
Image: Visual representation of TV compatibility for the mount.
Кадам-кадам орнотуу
- Locate Wall Studs (Wood Stud Installation): Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs at the desired height for the top of your TV. Ensure the marks are level.
- Бургулоо пункттарын белгилөө: Hold the wall plate against the wall, aligning its center with your marked stud centers. Use a level to ensure the wall plate is perfectly horizontal. Mark the drilling points through the holes on the wall plate.
- Бургулоочу тешиктер: For wood studs, drill pilot holes using a 7/32" (5.5 mm) drill bit to a depth of 2.2" (55 mm). For concrete/brick walls, use a 3/8" (10 mm) masonry drill bit to a depth of 2.4" (60 mm) and insert concrete anchors.
- Дубал плитасын бекитүү: Secure the wall plate to the wall using the provided lag bolts and washers. Tighten the bolts firmly but do not over-tighten.
- Сыналгы кашааларын сыналгыга тиркөө: Carefully place your TV face down on a soft, clean surface. Attach the two TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
- Телевизорду дубалга илип коюу: With assistance, carefully lift the TV and hook the TV bracket arms onto the top edge of the wall plate. Gently lower the TV until the brackets engage with the wall plate.
- Коопсуз сыналгы: Locate the locking screws or mechanisms on the bottom of the TV bracket arms. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.
- Эңкейүүнү тууралоо: Loosen the tilt tension knob(s) on the mount (if applicable) to adjust the TV to your desired viewing angle. Once set, tighten the knob(s) to secure the tilt position.
Эңкейтүү функциясын иштетүү
The Rocketfish Tilting TV Wall Mount features fingertip tilt technology, allowing you to easily adjust your TV's vertical viewing angle. To tilt your TV:
- Чыңалууну басаңдатыңыз: Locate the tilt tension knob(s) on the side or bottom of the TV bracket arms. Turn the knob(s) counter-clockwise slightly to loosen the tension.
- Бурчту тууралоо: Gently push or pull the bottom of your TV to achieve the desired upward or downward tilt angle.
- Коопсуз позиция: Once the desired angle is achieved, turn the tilt tension knob(s) clockwise to tighten and secure the TV in place. Ensure the TV is stable before releasing it.
Image: Close-up of the tilt tension knob for adjustment.
Техникалык тейлөө
Regular maintenance helps ensure the longevity and safe operation of your TV wall mount.
- Тазалоо: Орноткучту жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар капталга зыян келтириши мүмкүн.
- Мезгилдүү текшерүүлөр: Periodically check all screws and connections to ensure they remain tight and secure. If any looseness is detected, re-tighten them immediately.
- Зыянды текшерүү: Inspect the mount for any signs of damage or wear. If any damage is found, do not use the mount and contact customer support.
Проблемаларды чечүү
If you encounter issues with your Rocketfish TV wall mount, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Телевизор деңгээли жок. | Дубал плитасы орнотуу учурунда түз эмес. | Remove TV, loosen wall plate screws, adjust with a level, and re-tighten. |
| Mount feels loose on the wall. | Lag bolts not fully tightened or improper wall anchors used. | Ensure lag bolts are securely tightened into studs/anchors. Verify correct anchors for wall type. |
| TV tilt is too stiff or too loose. | Tilt tension knob needs adjustment. | Adjust the tilt tension knob(s) as described in the "Operating the Tilt Feature" section. |
| Телевизор розеткага туура келбейт. | Туура эмес VESA үлгүсү же телевизордун салмагы сыйымдуулугунан ашып кетти. | Verify your TV's VESA pattern and weight against the mount's specifications. This mount supports 32"-90" TVs up to 130 lbs. |
If the problem persists or is not listed here, please contact Rocketfish customer support.
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | Рокет балык |
| Модель номери | RF-TVMLPT03V3 |
| Монтаж түрү | Дубалга орнотуу |
| Кыймыл түрү | Тит |
| Туура келген сыналгы өлчөмдөрү | 32 - 90 дюйм |
| Максималдуу Салмак сыйымдуулугу | 130 фунт (59 кг) |
| Материал | Either Aluminum, Stainless Steel, or Alloy Steel |
| Продукциянын өлчөмдөрү | 2 x 26.49 x 17.4 дюйм |
| Элемент Салмагы | 6 фунт |
| Төмөн Проfile Дизайн | Positions TV 1.9" from the wall |
Кепилдик жана колдоо
Rocketfish products are designed for quality and reliability. For specific warranty information, please refer to the warranty card included with your product or visit the official Rocketfish website. If you require technical assistance, have questions about installation, or need to report missing/damaged parts, please contact Rocketfish customer support. Have your product model number (RF-TVMLPT03V3) and purchase information ready when contacting support.
You can often find support contact information on the Rocketfish official webсайты же продуктуну сатып алган сатуучу аркылуу.
