Продукт бүттүview
The AIRTOK BZ-1802 Air Purifier is designed to improve indoor air quality by effectively removing various airborne particles and odors. Featuring double-sided air inlets and two H13 HEPA filters, it is suitable for large rooms up to 1200 sq.ft. The unit includes a PM2.5 air quality sensor and offers both automatic and manual fan speed control.

Figure 1: AIRTOK Air Purifier BZ-1802, a compact black cube-shaped device with a digital display on the front panel.
Негизги өзгөчөлүктөрү
- PM2.5 Air Quality Index (AQI): Displays current air quality via red (Unhealthy), yellow (Moderate), and blue (Good) indicator lights, along with specific PM2.5 numerical values.
- Automatic Mode & 4 Fan Speeds: Automatically adjusts fan speed based on air quality. Manual control with 4-speed options is also available.
- Натыйжалуу жүгүртүү: Double-sided air inlets with 2 H13 HEPA filters clean air in 779ft²/76m² per hour, covering up to 1200 sq.ft. in 60 minutes.
- HEPA H13 Filters: Traps up to 99.97% of particles as small as 0.3 microns, including pet hair, pollen, dust, smoke, and odors.
- Quiet Sleeping Mode: Operates as low as 25 decibels, ensuring minimal disturbance during sleep, work, or study.
- Төмөн энергия керектөө: Rated power of 18W, consuming less than 0.018kWh per hour.
Орнотуу колдонмосу
1. Кутудан чыгаруу жана алгачкы текшерүү
Carefully remove all components from the packaging. Verify that the air purifier, two HEPA H13 filters, and the power adapter are present. Retain the instruction manual for future reference.
2. Фильтрди орнотуу
The air purifier comes with two HEPA H13 filters pre-installed but wrapped in plastic for protection. These plastic coverings must be removed before first use.
- Open the cover on the back of the air purifier. This cover is typically held by magnets and can be gently pulled open.
- Pull out the two filters using the designated pull tabs.
- Remove all plastic packaging from both filters.
- Reinsert the filters into the air purifier. Ensure the "Air Flow" arrows on the filter frames point inwards, towards the center of the unit. The filters are designed to slide smoothly into place.
- Close the back cover, ensuring it clicks securely into place via its magnetic attachments.

Figure 2: Visual guide for opening the back cover and removing/inserting filters. Note the 'Air Flow' direction.

Figure 3: Detailed steps for filter replacement, showing removal of plastic and correct orientation.
3. Power Connection
Connect the power adapter to the designated port on the air purifier (usually at the bottom rear). Plug the other end into a standard electrical outlet. The power cord is approximately 10 feet long, allowing for flexible placement.
Иштөө нускамалары
1. Күйгүзүү/өчүрүү
Press the power button (usually indicated by a circle with a vertical line) on the control panel to turn the unit on or off.
2. Air Quality Display (PM2.5 AQI)
Upon powering on, the air purifier's display will show the current PM2.5 content in µg/m³ and illuminate with a color-coded indicator:
- Blue Light (Good): PM2.5 content 1-35 µg/m³.
- Yellow Light (Moderate): PM2.5 content 36-115 µg/m³.
- Red Light (Unhealthy): PM2.5 content >115 µg/m³.

Figure 4: The air purifier's display showing PM2.5 levels and corresponding color indicators.

Figure 5: Visual representation of air quality levels (Good, Moderate, Poor) and their associated fan speeds.
3. Operating Modes & Fan Speeds
The air purifier offers both automatic and manual control over fan speeds.
- Автоматтык режим (A): Upon booting, the unit defaults to automatic mode. It will automatically adjust the fan speed (from low to high) based on the detected air quality. As air quality improves, the fan speed will decrease, entering an energy-saving mode when air quality is good (blue light).
- Manual Fan Speeds (1, 2, 3, 4): You can manually cycle through 4 different fan speeds by pressing the '+' or '-' buttons on the control panel.
- Уйку режими: This mode operates at the lowest fan speed (approx. 25 decibels) and typically turns off all display lights for undisturbed sleep.

Figure 6: Illustration of the Smart Auto Mode and the quiet Sleep Mode operation.
4. Official Product Video: Operation Overview
Video 1: This official seller video demonstrates the AIRTOK air purifier's features, including its air quality sensors, PM2.5 index display, smart touch operation, double-sided H13 filters, and automatic mode functionality. It also highlights its effectiveness against wildfire smoke, pollen, dust, and odors, and shows the quiet sleep mode.
Техникалык тейлөө
1. Filter Life and Replacement
The air purifier will remind you when the filter needs to be replaced, typically every 3-6 months, depending on usage and air quality. A red filter replacement reminder light will flash.
Чыпкаларды алмаштыруу үчүн:
- Аба тазалагычты өчүрүп, розеткадан ажыратыңыз.
- Open the back cover and pull out the two old filters.
- Dispose of the old filters responsibly.
- Insert new genuine AIRTOK replacement filters (Model: B0CBPDSN7J). Ensure the triangle symbol on the filter faces inside the machine.
- Арткы капкакты жабыңыз.
- Plug in the air purifier. To reset the filter replacement reminder, touch and hold the '-' button for 3 seconds.

Figure 7: The air purifier with its two side panels open, revealing the dual HEPA filters for efficient air intake.
2. Агрегатты тазалоо
Wipe the exterior of the air purifier with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the unit.
Проблемаларды чечүү
If you encounter issues with your AIRTOK Air Purifier, please refer to the following common solutions:
- Түзмөк күйбөй жатат: Электр шнурунун түзүлүшкө да, иштеп жаткан электр розеткасына да бекем сайылганын текшериңиз.
- Filter reminder light flashing after replacement: Press and hold the '-' button for 3 seconds to reset the filter life counter.
- Reduced airflow or purification: Check if the filters are clogged. Replace them if necessary. Ensure the air inlets and outlets are not obstructed.
- адаттан тыш ызы-чуу: Verify that the filters are correctly installed and the back cover is securely closed.
- Inaccurate PM2.5 readings: Ensure the sensor area is clean and free from dust accumulation.
For issues not covered here, please contact AIRTOK customer support.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | АЙРТОК |
| Модель номери | BZ-1802 |
| Продукциянын өлчөмдөрү | 8 x 8 x 8.3 дюйм; 4.41 фунт |
| Полдун аянты | 1200 чарчы футка чейин |
| Чыпка түрү | HEPA H13 |
| Номиналдуу кубаттуулук | 18 Ватт |
| Ызы-чуу деңгээли (Уйку режими) | As low as 25 decibels |
| Түс | Кара |
| Сертификаттар | CARB Certified, FCC, ETL listed, 100% Ozone free, EPA Certified |

Figure 8: Dimensions of the AIRTOK Air Purifier BZ-1802.
Кепилдик жана колдоо
The AIRTOK Air Purifier BZ-1802 is backed by a USA registered Lifetime Warranty when genuine AIRTOK replacement filters are used. For warranty claims, technical support, or any inquiries, please refer to the contact information provided in your product packaging or visit the official AIRTOK webсайт.





