Продукт бүттүview
The InSinkErator HOT250 Instant Hot Water Dispenser provides near-boiling water directly from your kitchen sink, offering immediate access for various tasks such as cooking, cleaning, and preparing hot beverages. This system combines a stylish single-handle matte black faucet with a durable 2/3-gallon stainless steel tank, featuring adjustable temperature controls. Its transitional design complements diverse kitchen decors, and the faucet includes a 360-degree swivel spout for convenience and a spring-loaded handle for automatic hot water shut-off upon release, ensuring safety.
Image: The InSinkErator HOT250 system, highlighting its instant hot water capability and modern design.
Image: Various faucet finishes available, including Chrome, Satin Nickel, and Matte Black, to match different kitchen styles.
Орнотуу жана орнотуу
Installation of the InSinkErator HOT250 is designed for ease, requiring only a standard 1 3/8-inch hole for the faucet and an under-sink electrical outlet for the tank's power cord. The tank connections are tool-free, and the system includes dry start protection for the hot water tank, preventing damage if accidentally plugged in without water. For detailed instructions, always refer to the included Installation, Care, and Use (ICU) manual.
4 Steps to Instant Hot Water
- Step 1: Turn off water and install faucet. Ensure the main water supply is turned off before beginning installation. Install the faucet into the designated sink hole.
- Step 2: Connect water lines, turn on water, and fill tank. Connect the hot and cold water supply lines to the appropriate inlets on the tank and faucet. Once connections are secure, turn on the water supply to fill the tank.
- Step 3: Plug in the tank to heat. After the tank is filled, plug the power cord into a dedicated under-sink electrical outlet. The tank will begin heating the water to the set temperature.
Image: Diagram illustrating turning off water and installing the faucet.
Image: Diagram showing the connection of water lines and filling the tank.
Image: Diagram illustrating plugging in the tank for heating.
Иштөө нускамалары
The InSinkErator HOT250 is designed for simple and safe operation. To dispense hot water, pull the single-handle faucet forward. The spring-loaded mechanism ensures the handle automatically returns to the closed position upon release, shutting off the hot water flow. The faucet spout can swivel 360 degrees, providing flexibility for various kitchen tasks.
Image: A user dispensing near-boiling water from the faucet into a cup, demonstrating instant hot water on demand.
Image: A diagram illustrating the automatic safety shut-off feature, where the spring-loaded handle ensures immediate closure upon release.
Image: A close-up of the temperature adjustment dial on the tank, allowing users to set the water temperature between 160°F and 210°F.
Техникалык тейлөө
To ensure optimal performance and water quality, regular maintenance is recommended. The InSinkErator HOT250 is compatible with reverse osmosis systems and is NSF 58 certified. Consider adding an InSinkErator Filtration System for cleaner, better-tasting water. Filters should be replaced periodically as per the filtration system's instructions, typically every 6 months, to maintain efficiency and water quality.
Image: An InSinkErator F-2000 water filter shown alongside the hot water dispenser, emphasizing the option for enhanced water quality.
Проблемаларды чечүү
If you encounter issues with your InSinkErator HOT250, please refer to the following general advice. For specific problems, consult the detailed troubleshooting section in your Installation, Care, and Use (ICU) manual or contact customer support.
- Ысык суу жок: Check if the unit is plugged in and the power outlet is active. Ensure the temperature control dial on the tank is set correctly. Verify that the water supply to the unit is turned on.
- Суу агып кетиши: Inspect all connections for tightness. If a leak persists, turn off the water supply to the unit and contact customer support.
- Жай суу агымы: This may indicate a clogged filter. Replace the water filter if applicable.
- адаттан тыш үндөр: Some gurgling or hissing sounds are normal during heating. Persistent loud noises may indicate an issue with the tank or water supply.
Техникалык шарттар
Detailed specifications for the InSinkErator HOT250 Instant Hot Water Dispenser System:
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | InSinkErator |
| Модель аты | InSinkErator HOT250 Instant Hot Water Dispenser System, Single-Handle Matte Black Faucet with 2/3-Gallon |
| Элемент моделинин номери | Stainless Steel Tank, H250MBLK-SS |
| Түс | Matte Black |
| Продукциянын өлчөмдөрү | 5.29 x 2.97 x 8.21 дюйм |
| Элемент Салмагы | 8.03 фунт |
| Өзгөчө өзгөчөлүк | Dry Start Protection |
| Камтылган компоненттер | Faucet, Hot Water Tank, Supply Lines, Mounting Hardware |
| Сертификаттар | NSF/ANSI/CAN 372 (Lead Free), NSF/ANSI/CAN 61: Q<1 (Lead-Free), NSF/ANSI 58 (Reverse Osmosis Compatible), ASME A112.18.1/CSA B125.1-18, ASSE 1023, cULus / UL Listed |
Image: Detailed dimensions for both the hot water tank and the faucet, including height, width, depth, and spout reach.
Сүрөт: бүттүview of global quality and safety standards met by the product, including Lead Free, Reverse Osmosis Compatible, Quality & Safety, and ADA Compliant.
Кепилдик
The InSinkErator HOT250 Instant Hot Water Dispenser System is backed by InSinkErator's 3-Year "We Come to You" Limited Service Warranty. This warranty provides in-home service for covered issues, ensuring convenient support for your product.
Image: The "We Come to You" logo, signifying InSinkErator's 3-Year In-Home Limited Warranty service.
Колдоо
For further assistance, technical support, or warranty claims, please contact InSinkErator customer service. Refer to the contact information provided in your product packaging or visit the official InSinkErator webэң акыркы колдоо ресурстары үчүн сайт.
