Tyger Auto LanderX Running Board Installation Manual

1. Продукт бүтүп калдыview

The Tyger Auto LanderX Running Boards are designed to provide a secure and convenient step for entering and exiting your truck. Constructed from heavy-duty carbon steel with a textured black finish, these running boards offer durability and enhanced corrosion resistance. The unique triangular tubing design boosts structural strength, and the 5-inch drop ensures effortless access.

Image 1.1: Tyger Auto LanderX Running Boards. This image displays the pair of textured black running boards with their triangular tube structure and integrated drop steps.

2. Шайкештик жана ылайыктуулук

These running boards are compatible with the following Crew Cab models:

• 2009-2018 Dodge Ram 1500
• 2010-2026 Рам 2500 3500
• 2019-2024 Ram 1500 Classic

Important Cab Size Note:

• Only fits Crew Cab models with 4 full-size doors.
• Not compatible with Quad Cab or Mega Cab models.
• Not compatible with Chassis Cab and Diesel models.
• Not compatible with 5th Gen 2019-UP Ram 1500.

Image 2.1: Crew Cab Compatibility Diagram. This diagram illustrates the difference between Quad Cab, Crew Cab, and Mega Cab configurations, highlighting that only Crew Cab (with 4 full doors) is compatible.

For 2009-2011 and some 2012 models, minor drilling of 1/4'' holes through the pinch weld may be required for support brackets.

3. Бөлүктөр тизмеси

Орнотууну баштоодон мурун бардык компоненттер бар экенин текшериңиз:

• Driver Side Running Board (1)
• Passenger Side Running Board (1)
• Mounting Brackets (Set for driver and passenger sides)
• All necessary hardware (bolts, washers, nuts)
• Орнотуу боюнча колдонмо (бул колдонмо)

Refer to the detailed parts diagram in the included paper instruction manual for specific quantities and types of hardware.

4. Керектүү куралдар

Орнотуу үчүн, адатта, төмөнкү шаймандар талап кылынат:

• Розетка ачкычтарынын топтому
• Момент ачкычы
• Drill (for specific models, as noted in compatibility)
• Өлчөө лентасы
• Коопсуздук көз айнек
• Колкаптар

5. Орнотуу боюнча нускамалар

It is recommended to have a second person assist with the installation due to the size and weight of the running boards.

5.1-кадам: Унааны даярдоо

1. Унааны тегиз, тегиз жерге токтотуп, кол тормозду басыңыз.
2. Locate the factory mounting points along the rocker panel of your truck. These are typically threaded holes.
3. For 2009-2011 and some 2012 models, if necessary, drill 1/4'' holes through the pinch weld for additional support brackets.

5.2-кадам: Монтаждоо кронштейндерин орнотуу

1. Identify the correct mounting brackets for each position (front, middle, rear) on both the driver and passenger sides. Refer to the paper manual for specific bracket identification.
2. Attach the brackets to the vehicle's frame using the provided hardware. Hand-tighten all bolts initially to allow for adjustment.

Step 5.3: Attach Running Boards

1. Carefully lift one running board and align it with the installed mounting brackets.
2. Secure the running board to the brackets using the remaining hardware. Again, hand-tighten all bolts.
3. Adjust the position of the running board to ensure it is level and properly aligned with the vehicle.

5.4-кадам: Акыркы бекемдөө

1. Once satisfied with the alignment, fully tighten all bolts on both the brackets and the running boards. Refer to the paper manual for specific torque specifications.
2. Repeat the entire process for the opposite side of the vehicle.

Image 5.2: Heavy-Duty Steel Brackets. This image shows the robust steel brackets with pre-drilled threaded holes designed for secure and easy installation onto the vehicle's frame.

6. Техникалык тейлөө

To ensure the longevity and appearance of your Tyger Auto LanderX Running Boards, follow these maintenance guidelines:

• үзгүлтүксүз тазалоо: Wash the running boards regularly with mild soap and water to remove dirt, road salt, and debris. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
• Жабдууларды текшерүү: Periodically check all mounting hardware for tightness. Vibrations from driving can sometimes loosen bolts over time. Re-tighten as necessary.
• Зыянды текшерүү: Inspect the running boards for any signs of damage, such as dents, scratches, or corrosion. Address any issues promptly to prevent further deterioration.
• Коргоочу каптоо: кош-stage E-coating powder textured black finish provides excellent rust and corrosion resistance. Avoid scratching this coating to maintain protection.

7. Кыйынчылыктарды

Орнотуу учурунда же андан кийин кандайдыр бир көйгөйлөргө туш болсоңуз, төмөнкүлөрдү карап көрүңүз:

• Running Board Not Level: Loosen the mounting bolts, adjust the running board's position until level, and then re-tighten all hardware securely.
• Loose Fit: Ensure all bolts are fully tightened to the recommended torque specifications. Check that the correct brackets are used for each mounting point.
• Жетишпеген бөлүктөр: If any parts are missing from your package, contact Tyger Auto customer support immediately.
• Орнотуу маселелери: Double-check your vehicle's make, model, and cab type against the compatibility section (Section 2). Ensure you have a Crew Cab model.

8. Техникалык шарттар

Image 8.1: Product Dimensions Diagram. This image provides a visual representation of the running board's length, width, and height.

9. Кепилдик жана колдоо

Tyger Auto backs this product with a 5-year warranty for US customers against manufacturing defects. For warranty claims, technical assistance, or any questions regarding your LanderX Running Boards, please contact Tyger Auto customer support through their official webпродукт сатылып алынган сайт же сатуучу.

Кепилдикти текшерүү үчүн сатып алганыңыздын далилин сактап коюңуз.