Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Thermalright Assassin X 120R SE PLUS CPU Cooler. This high-performance air cooler is designed to efficiently dissipate heat from your CPU, ensuring stable operation under various workloads. It features a single tower design, four pure copper heat pipes, and dual 120mm PWM fans for optimal cooling and quiet performance. Please read this manual thoroughly before installation and use.
Коопсуздук маалыматы
- CPU муздаткычын орнотуудан же техникалык тейлөөдөн мурун, ар дайым компьютериңизди электр кубатынан ажыратыңыз.
- CPU, энелик плата же муздаткычка зыян келтирбөө үчүн компоненттерди этияттык менен кармаңыз.
- Keep thermal paste away from skin and eyes. In case of contact, rinse thoroughly with water.
- Ensure proper ventilation in your computer case to maximize cooling efficiency.
- Do not attempt to modify the cooler or its components, as this may void the warranty and pose a safety risk.
Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- Thermalright Assassin X 120R SE PLUS CPU Cooler (Heatsink with pre-installed mounting hardware)
- TL-C12C 120mm PWM Fan
- TL-C12RB V2 120mm Reverse Airflow PWM Fan
- Fan Clips (for two fans)
- Жылуулук кошулмасы
- Intel Mounting Kit (LGA1700/115X/1200/1851)
- AMD орнотуу комплекти (AM4/AM5)
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| CPU Cooler Dimensions | 125(L)x96(W)x148(H)mm (4.92x3.78x5.83 inch) |
| Жылыткыч материал | Алюминий |
| Жылуулук түтүктөрү | 4x6mm Copper Heat Pipes (AGHP Technology) |
| Fan өлчөмдөрү | 120x120x25mm (4.72x4.72x0.98 inches) |
| Желдетүүчү ылдамдык (RPM) | 1550rpm±10% / 1500rpm±10% |
| Кубат туташтыргычынын түрү | 4-пин PWM |
| Тtage | 12V |
| Аба агымы | 66.17/58 CFM (MAX) |
| Ызы-чуу деңгээли | ≤25.6 дБ(А) |
| Шайкеш розеткалар | Intel: LGA1150/1151/1155/1156/1200/1700/17XX/1851, AMD: AM4/AM5 |
| Салмагы | 2.07 фунт |
The cooler features AGHP (Anti-Gravity Heat Pipe) Technology, ensuring consistent performance regardless of mounting orientation. The frosted black top cover provides a sleek aesthetic.
Image: Close-up of the cooler's heat pipes, illustrating the AGHP Technology for consistent performance in various orientations.
Image: Dimensional diagram of the Assassin X 120R SE PLUS CPU Cooler and its TL-C12C fan, showing length, width, and height measurements.
Орнотуу боюнча колдонмо
Follow these steps carefully to install your Thermalright Assassin X 120R SE PLUS CPU Cooler. The installation process varies slightly depending on your CPU socket type (AMD or Intel).
1. AMD AM4/AM5 орнотуусу
- Motherboard даярдоо: For AMD AM4/AM5, remove the existing plastic brackets around the CPU socket. Keep the motherboard backplate in place.
- Standoffs орнотуу: Place the four red plastic standoffs onto the motherboard's CPU cooler mounting holes.
- Металл кашааларды орнотуу: Position the two metal brackets over the plastic standoffs and secure them with the provided AM4 screws. Tighten them evenly.
Video: AMD AM4/AM5 Motherboard Preparation and Bracket Installation (0:06 - 1:25).
2. Intel LGA1700/115X/1200/1851 Installation
- Арткы бетин даярдоо: Adjust the mounting hole position on the universal backplate to match your Intel socket (e.g., 115X or 1700).
- Backplate орнотуу: Place the adjusted backplate on the backside of your motherboard, aligning the holes with the CPU socket.
- Standoffs орнотуу: From the front side of the motherboard, install the four blue Intel plastic standoffs into the backplate.
- Металл кашааларды орнотуу: Position the two metal brackets over the plastic standoffs and secure them with the provided Intel screws. Tighten them evenly.
Video: Intel LGA1700/115X Backplate and Bracket Installation (1:26 - 2:40).
3. Common Procedures (All Sockets)
- Термикалык кошулманы колдонуңуз: Apply a small amount of thermal compound (pea-sized dot or line method) to the center of your CPU's IHS (Integrated Heat Spreader).
- Remove Heatsink Sticker: Ensure you remove the protective sticker from the heatsink's base before mounting.
- Жылытуучу раковинаны орнотуу: Carefully place the heatsink onto the CPU, aligning the mounting nuts with the screws on the installed brackets. Tighten both nuts evenly with a screwdriver until snug. Do not overtighten.
- Күйөрмандар орнотуу: Attach the fan clips to the 120mm PWM fans. Then, clip the fans onto the heatsink, ensuring proper airflow direction (typically pushing air through the heatsink towards the rear of the case).
- Желдеткич кабелдерин туташтырыңыз: Connect the 4-pin PWM power cables from the fans to the CPU_FAN header(s) on your motherboard.
Video: Applying Thermal Compound, Mounting Heatsink, and Fan Installation (2:41 - 3:50).
Image: Quality installation kits for both AMD and Intel platforms, showcasing the universal mounting system and heatsink design.
Image: Optimized installation experience, highlighting the large heatsink surface area, high airflow fan, and intelligent PWM fan speed control.
Image: The Assassin X 120R SE PLUS CPU cooler, featuring its single tower design, dark top plate, and four pure copper heat pipes.
Иштөө нускамалары
Once installed, the Thermalright Assassin X 120R SE PLUS CPU Cooler operates automatically. The PWM (Pulse Width Modulation) fans adjust their speed based on CPU temperature, providing efficient cooling while minimizing noise. Ensure your motherboard's BIOS/UEFI settings are configured to allow PWM control for the CPU fan header.
- Баштапкы жүктөө: After installation, power on your computer. Monitor CPU temperatures using system monitoring software to confirm proper cooler function.
- BIOS/UEFI Орнотуулары: Access your motherboard's BIOS/UEFI to verify that the CPU fan is detected and operating in PWM mode. You can often customize fan curves here to suit your preference for noise and cooling performance.
- Аба агымы: Ensure that the fans are oriented correctly to draw cool air through the heatsink and exhaust warm air out of the case. The dual fan configuration (one intake, one exhaust reverse airflow fan) creates strong airflow.
Техникалык тейлөө
Үзгүлтүксүз тейлөө сиздин CPU муздаткычыңыздын оптималдуу иштешин жана узак иштөөсүн камсыз кылууга жардам берет.
- Чаңды тазалоо: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Accumulation of dust can reduce cooling efficiency.
- желдеткич текшерүү: Check the fans for any signs of wear, damage, or unusual noise. Ensure fan clips are securely attached.
- Термикалык паста: While not frequently required, if you remove the heatsink for any reason, it is recommended to clean off the old thermal paste from both the CPU and heatsink base and apply a fresh layer before reinstallation.
Проблемаларды чечүү
Эгерде сиз CPU муздаткычыңызда көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү чечүү кадамдарын караңыз:
- Жогорку CPU температурасы:
- Verify that the heatsink is securely mounted and making good contact with the CPU.
- Термикалык пастанын туура жана бирдей сүйкөлгөнүн текшериңиз.
- Ensure fans are spinning and oriented for proper airflow.
- Clean any dust accumulation from the heatsink and fans.
- Check case airflow and fan configuration.
- Айланбаган күйөрмандар:
- Ensure fan cables are securely connected to the CPU_FAN header(s) on the motherboard.
- Check BIOS/UEFI settings to ensure fan control is enabled and not set to a very low RPM.
- Test fans by connecting them to a different fan header if available.
- Unusual Fan Noise:
- Inspect fan blades for any obstructions or damage.
- Ensure fan clips are properly seated and not vibrating against the heatsink.
- Check fan bearings for wear; consider replacing the fan if noise persists.
Кепилдик жана колдоо
Thermalright products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official Thermalright webсайтына кириңиз же жергиликтүү сатуучуңузга кайрылыңыз. Кепилдик талаптары үчүн сатып алганыңызды тастыктаган документти сактап коюңуз.