roborock Qrevo сериясындагы негизги щетка капкагы боюнча колдонмо

1. Киришүү

This manual provides instructions for the installation and maintenance of the roborock Qrevo Series Main Brush Cover. This accessory is designed to protect the main brush and ensure optimal cleaning performance for your compatible roborock robot vacuum cleaner.

Шайкештик: This main brush cover is compatible with roborock Qrevo, Qrevo S, Qrevo Pro, and Qrevo MaxV robot vacuum models.

2. Продукциянын өзгөчөлүктөрү

• Калкыма дизайн: The cover features a versatile floating mechanism that allows it to adjust to various floor surfaces, ensuring consistent contact and improved cleaning effectiveness.
• Shock-Absorbing Rubber Coating: Equipped with a special shock-absorbing rubber pad where it contacts the floor, this design reduces wear on the cover and helps prevent damage to your flooring.
• Чаташууга каршы дизайн: The unique structure of the main brush cover helps to block and contain hair, preventing it from tangling around the main brush.
• Snap-on Structure: Designed for ease of use, the cover features a snap-on mechanism for simple, one-handed installation and removal.

3. Орнотуу

Follow these steps to install or replace the main brush cover on your roborock Qrevo series robot vacuum:

1. Өчүрүү: Ensure your robot vacuum is powered off before beginning installation.
2. Access Brush Compartment: Turn the robot vacuum upside down to access the main brush compartment.
3. Эски капкакты алып салыңыз (эгер бар болсо): Locate the two release tabs on the existing main brush cover. Press these tabs inward and lift the cover to remove it.
4. Жаңы мукабанын орду: Align the new main brush cover with the compartment opening. Ensure the tabs on the cover match the slots on the robot.
5. Коопсуз капкак: Gently press the new cover down until you hear a click, indicating it is securely locked into place. Verify that both tabs are fully engaged.

Сүрөт 1: Жогорку view of the roborock Qrevo Series Main Brush Cover. This image shows the overall shape and the small brushes designed to prevent tangles.

Сүрөт 2: Каптал view of the main brush cover, highlighting the snap-on structure for easy installation and removal.

4. Техникалык тейлөө

Regular maintenance of the main brush cover helps ensure the longevity and optimal performance of your robot vacuum.

• Тазалоо жыштыгы: Inspect the main brush cover weekly, or more frequently if your robot vacuum operates in areas with high hair or debris accumulation.
• Чачты алып салуу: The anti-tangle design helps, but some hair may still accumulate. Remove any tangled hair or debris from the small brushes and the edges of the cover.
• Өчүрүү: Use a dry cloth to wipe down the cover and remove any dust or dirt. Avoid using harsh chemicals or abrasive materials.
• Зыянды текшерүү: Periodically check the rubber coating and the snap-on tabs for any signs of wear or damage. Replace the cover if it is damaged to maintain proper function and floor protection.

5. Кыйынчылыктарды

If you encounter issues related to the main brush cover, consider the following:

• Cover Not Securing: Ensure the cover is correctly aligned and pressed down firmly until both snap-on tabs click into place. Check for any obstructions preventing proper closure.
• Ызы-чуунун көбөйүшү: A loose or improperly installed cover can cause increased operational noise. Reinstall the cover, ensuring it is fully secured.
• Төмөндөтүлгөн тазалоо натыйжалуулугу: Excessive hair or debris trapped under the cover or around the main brush can hinder cleaning. Perform thorough maintenance as described in Section 4.
• Пол сызыктары: If the shock-absorbing rubber coating is damaged or missing, it may lead to floor scratches. Inspect the cover for damage and replace if necessary.

6. Техникалык шарттар

7. Кепилдик жана колдоо

For warranty information or technical support, please refer to the official roborock website or contact roborock customer service directly. Keep your purchase receipt for warranty claims.

Official Roborock Store: Roborock Official EU Store