Колдонмолор+

ANCEL AD530, BM200 Pro

ANCEL AD530 OBD2 Scanner and BM200 Pro Battery Monitor Instruction Manual

Comprehensive guide for the setup, operation, and maintenance of your ANCEL AD530 OBD2 Scanner and ANCEL BM200 Pro Battery Monitor.

Introduction

This manual provides detailed instructions for using your ANCEL AD530 OBD2 Scanner and ANCEL BM200 Pro Battery Monitor. This package includes one (1) ANCEL AD530 Code Reader and one (1) ANCEL BM200 Pro Battery Monitor. Please read this manual thoroughly before operation to ensure proper use and to maximize the benefits of these diagnostic tools.

ANCEL AD530 OBD2 сканери

1. Продукт бүтүп калдыview

The ANCEL AD530 is a full-function OBD2 diagnostic tool designed for all vehicles. It provides comprehensive diagnostic capabilities to help identify and resolve vehicle issues efficiently.

ANCEL AD530 OBD2 Scanner displaying various diagnostic functions

1-сүрөт: ANCEL AD530 displaying its full range of OBD2 functions, including reading and erasing DTCs, I/M readiness, live data stream, O2 sensor test, on-board monitor, EVAP system test, freeze frame, DTC lookup, vehicle information, battery test, and VIN information.

Негизги функцияларга төмөнкүлөр кирет:

  • Read & Erase DTCs: Retrieve and clear Diagnostic Trouble Codes.
  • I/M даярдык тести: Check emission-related systems' readiness status.
  • Live Data Stream: View реалдуу убакыт сенсор маалыматтар.
  • O2 сенсор тести: Monitor and test oxygen sensors.
  • Борттогу монитор тести: Access results of on-board diagnostic monitoring tests.
  • EVAP системасы сыноо: Initiate a test of the evaporative emission system.
  • Кадр дайындарын тоңдуруп коюу: View vehicle parameters recorded when an emission-related fault occurs.
  • DTC издөө: Built-in library for code definitions.
  • Унаа жөнүндө маалымат: Retrieve VIN, CIN, and CVN.
  • Батарея сыноо: Basic battery voltagд текшерүү.

2. Орнотуу жана туташуу

To begin using the ANCEL AD530, connect it to your vehicle's OBD2 port. The port is typically located under the dashboard on the driver's side.

  1. Locate the 16-pin OBD2 Data Link Connector (DLC) in your vehicle.
  2. Plug the AD530's OBD2 cable into the vehicle's DLC.
  3. Аппарат автоматтык түрдө күйөт.

3. Operating the ANCEL AD530

Navigate the AD530 using the directional buttons and the "OK" button. The "ESC" button returns to the previous menu, and the "I/M" button provides quick access to I/M Readiness status.

3.1. Emission Test Readiness (I/M Readiness)

ANCEL AD530 displaying I/M Readiness status for emission test

2-сүрөт: The ANCEL AD530 showing the I/M Readiness screen, indicating the status of various emission monitors (e.g., IGN, MIS, FUEL, CCM, CAT, EVAP, O2S, AIR, HTR, EGR) with checkmarks for 'Ready' and crosses for 'Not Ready'.

This function checks if your vehicle's emission systems are ready for an inspection. A green checkmark indicates the monitor has completed its diagnostic cycle, while a red 'X' means it has not. This helps ensure your vehicle passes exhaust emission tests.

3.2. Кыйынчылык коддорун окуу жана тазалоо

  1. From the main menu, select "OBDII" and press "OK".
  2. "Коддорду окуу" дегенди тандаңыз view учурдагы, күтүлүп жаткан жана туруктуу Диагностикалык Кыйынчылык Коддору (DTC).
  3. To clear codes, select "Erase Codes". Эскертүү: Clearing codes will also clear freeze frame data and reset I/M readiness monitors. Ensure you have addressed the underlying issue before clearing codes.

3.3. Battery Health Status Check

ANCEL AD530 displaying real-time battery voltage график

3-сүрөт: The ANCEL AD530 showing a real-time graph of battery voltage, indicating normal and abnormal states with corresponding voltage ranges. This helps in monitoring the vehicle's battery health.

The AD530 can display real-time battery voltage, providing a quick assessment of your vehicle's battery health. This feature helps in identifying potential battery issues early.

ANCEL BM200 Pro Battery Monitor

1. Продукт бүтүп калдыview

The ANCEL BM200 Pro is a wireless battery monitor designed to provide continuous, real-time monitoring of your vehicle's 12-volt lead-acid battery. It offers multiple test functions and features for comprehensive battery health management.

ANCEL BM200 Pro display unit showing various battery test functions

4-сүрөт: The ANCEL BM200 Pro display unit illustrating its multi-test functions, including Battery Test, Cranking Test, Charging Test, Voltage Test, State of Health (SoH), State of Charging (SoC), and Temperature Display.

Key features and functions include:

  • Батарея сыноо: Assesses overall battery health.
  • Кранк сыноо: Evaluates the starting system performance.
  • Заряддоо сыноо: Monitors the alternator's charging output.
  • Тtage Test: реалдуу убакыт тtage мониторинг.
  • State of Health (SoH) & State of Charging (SoC): Provides detailed battery status.
  • Температура дисплейи: Monitors battery temperature.
  • 433MHz Wireless Transmission: Stable and convenient data transmission up to 70 feet.
  • Built-in Alarm Function: Alerts for abnormal battery conditions.
  • Two Charging Modes: Solar and Type-C for the display unit.
  • IP67 суу өткөрбөйт дизайн: Ensures durability in various conditions.
  • Жалынга каршы материал: Коопсуздук күчөтүлдү.
  • Төмөн энергия керектөө: Efficient operation with automatic connection.
  • Security Protection: Reverse connection, overheat, short circuit protection, and built-in fuse.
  • Built-in Shock Sensor: Automatic sleep mode to save power.

2. Орнотуу

Proper installation of the BM200 Pro monitor unit is crucial for accurate data collection and reliable wireless transmission.

Four steps for installing the ANCEL BM200 Pro battery monitor

5-сүрөт: Visual guide for the four installation steps of the ANCEL BM200 Pro: 1. Connect black clip to negative terminal. 2. Connect red clip to positive terminal. 3. Stick the monitor unit onto the battery surface. 4. Place the display unit in front of the windshield.

  1. Терс туташуу: Firmly connect the black clip of the monitor unit to the negative (-) pole of the vehicle battery.
  2. Позитивдүү туташуу: Firmly connect the red clip of the monitor unit to the positive (+) pole of the vehicle battery.
  3. Mount Monitor Unit: Stick the monitor unit onto the battery surface using the provided double-sided tape.
  4. Position Display Unit: Place the display unit in a suitable location on your dashboard, typically in front of the windshield, ensuring clear visibility and optimal wireless reception.

Маанилүү кеңештер:

  • Ensure the device is securely installed for the first time. Loose installation may cause abnormal data capture and display.
  • Verify the RF signal icon in the upper right corner of the display. A visible RF symbol indicates the display is successfully connected to the monitor unit and is receiving real-time data. If the RF symbol does not appear, try restarting the display unit.

3. Operating the ANCEL BM200 Pro

The BM200 Pro continuously monitors your battery and transmits data wirelessly to the display unit. The display provides real-time information and alerts.

3.1. Battery Test Functions

The display unit shows various battery parameters:

  • Батарея сыноо: Provides an overall assessment of battery health, often displayed as a percentage (SoH).
  • Кранк сыноо: When the engine starts, the device automatically tests the cranking system, displays the cranking voltage, and determines if the starting process is abnormal.
  • Заряддоо сыноо: After the car starts, it monitors the charging system, displays the charging percentage in real-time, and assesses the alternator's working condition.
  • Тtage Test: Continuously monitors battery voltage, helping to predict potential battery maintenance issues.

3.2. Зымсыз берүү

ANCEL BM200 Pro showing 433MHz wireless transmission range

6-сүрөт: The ANCEL BM200 Pro demonstrating its 433MHz wireless transmission capability, allowing stable data transfer between the battery monitor and the display unit over a distance of 30-70 feet.

The BM200 Pro utilizes 433MHz wireless transmission technology, offering a stable connection and convenient monitoring from a distance of 30 to 70 feet. This allows for effective battery monitoring even when outside the vehicle.

3.3. Built-in Alarm Function

ANCEL BM200 Pro alarm function indicating various abnormal conditions

7-сүрөт: The ANCEL BM200 Pro's built-in alarm function, highlighting alerts for low voltage, low battery, high temperature, abnormal cranking, and abnormal charging, providing timely warnings for proactive maintenance.

The device provides timely automatic alerts for abnormal data, including:

  • Төмөн үнtage
  • Батарея аз
  • Жогорку температура
  • Abnormal cranking
  • Нормалдуу заряддоо

These alerts help ensure proactive maintenance and prevent unexpected battery failures.

3.4. Charging the Display Unit

ANCEL BM200 Pro display unit showing solar and Type-C charging options

8-сүрөт: The ANCEL BM200 Pro display unit illustrating its two charging modes: solar charging via the integrated panel and Type-C charging (5V charger) for simultaneous power replenishment.

The BM200 Pro display unit supports two charging methods:

  • Күн кубаты: The integrated solar panel allows for continuous charging when exposed to sunlight.
  • Type-C заряддоо: Connect a 5V Type-C charger for faster or indoor charging.

Техникалык тейлөө

To ensure the longevity and optimal performance of your ANCEL AD530 and BM200 Pro, follow these maintenance guidelines:

  • Тазалоо: жумшак колдонуу, damp cloth to clean the devices. Do not use abrasive cleaners or solvents.
  • Сактагыч: Store the devices in a dry, cool environment away from direct sunlight and extreme temperatures.
  • Кабельге кам көрүү: Avoid bending or crimping the OBD2 cable excessively.
  • BM200 Pro Monitor Unit: Ensure the battery clips are clean and free of corrosion for a good connection. The unit is IP67 waterproof, but avoid prolonged submersion.
  • BM200 Pro Display Unit: Натыйжалуу кубаттоо үчүн күн панелин таза кармаңыз.

Проблемаларды чечүү

If you encounter issues with your ANCEL AD530 or BM200 Pro, refer to the following common troubleshooting steps:

  • Device Not Powering On (AD530):
    • OBD2 кабели унаанын DLCсине бекем туташтырылганын текшериңиз.
    • Унаанын аккумуляторунун көлөмүн текшериңизtage; the AD530 draws power from the vehicle.
  • No RF Signal on BM200 Pro Display:
    • Verify that the BM200 Pro monitor unit is correctly connected to the battery terminals.
    • Ensure the monitor unit is securely mounted and not obstructed.
    • Try restarting the display unit.
    • Confirm the display unit is within the 30-70 feet wireless transmission range of the monitor unit.
  • Inaccurate Readings (BM200 Pro):
    • Check for loose connections at the battery terminals.
    • Ensure the battery clips are clean and free of corrosion.
    • Verify the monitor unit is firmly attached to the battery.
  • Alarms Triggering Frequently (BM200 Pro):
    • If alarms for low voltage, low battery, high temperature, abnormal cranking, or charging are frequent, it indicates a potential issue with your vehicle's battery or charging system. It is recommended to have your vehicle's battery and charging system professionally inspected.

Техникалык шарттар

ANCEL AD530 OBD2 сканери

  • Дисплей: Түстүү LCD
  • Operating Voltage: 9-18V DC (from vehicle OBD2 port)
  • Колдоого алынган протоколдор: OBDII/EOBD/CAN
  • Функциялары: Read/Clear DTCs, I/M Readiness, Live Data, O2 Sensor Test, On-Board Monitor Test, EVAP Test, Freeze Frame, DTC Lookup, Vehicle Info, Battery Test.

ANCEL BM200 Pro Battery Monitor

  • Батарея шайкештиги: 12-Volt Lead-Acid Batteries
  • Зымсыз берүү: 433 МГц
  • Трансмиссия диапазону: 30-70 фут (болжол менен 9-21 метр)
  • Display Charging: Solar, Type-C (5V)
  • Энергияны керектөө: Approx. 2.3 mAh per hour
  • Коргоо: IP67 Waterproof, Flame Retardant Material, Reverse Connection Protection, Overheat Protection, Short Circuit Protection, Built-in Fuse.
  • Өзгөчөлүктөрү: Built-in Alarm, Built-in Shock Sensor (Auto Sleep).
Vehicles compatible with ANCEL BM200 Pro 12-volt lead-acid batteries

9-сүрөт: The ANCEL BM200 Pro is compatible with a wide range of vehicles equipped with 12-volt lead-acid batteries, including cars, SUVs, light trucks, RVs, travel trailers, pickups, motorcycles, forklifts, boats, and mowers.

Кепилдик жана колдоо

ANCEL is committed to providing high-quality products and customer service. For any inquiries or support needs, please contact our professional online team.

  • Кардарларды тейлөө: 24-hour reply within.
  • Кайтаруу жана алмашуу: 30-day return and exchange policy.
  • Техникалык көрсөтмө: Access to updated technical guidance.
  • Программалык камсыздоо жаңыртуулары: Free software upgrades.

Көбүрөөк жардам алуу үчүн, расмий ANCEL сайтына кириңиз webсайтка же түздөн-түз кардарларды колдоо менен байланышыңыз.

Тектеш документтер - AD530, BM200 Pro

Preview ANCEL AD530 Pro колдонуучусунун колдонмосу: OBDII сканери жана батареяны текшерүүчү колдонмо
ANCEL AD530 Pro үчүн толук колдонуучу колдонмосу, 2-бирде автоунаа диагностикалык куралы. Окуу/эр сыяктуу OBDII функцияларын камтыйт.asinG коддору жана айланууну, кубаттоону жана толкундуу сыноолорду камтыган автоунаанын аккумуляторун комплекстүү текшерүү.
Preview ANCEL AD530 User Manual
User manual for the ANCEL AD530 vehicle diagnostic tool, covering safety precautions, general information about OBD II, using the tool's features like I/M readiness, BAT check, DTC lookup, diagnostics, updates, and feedback.
Preview ANCEL FX2000 колдонуучусунун колдонмосу - Кесипкөй автоунаа OBD II диагностикалык куралы
ANCEL FX2000 үчүн кеңири колдонуучу колдонмосу, кесипкөй автомобиль OBD II диагностикалык куралы. Бул колдонмодо продукттун функциялары, туташуу, жөндөөлөр, диагностикалык функциялар, системаны диагностикалоо, жардам ресурстары, каттоо, программалык камсыздоону жаңыртуу, көп берилүүчү суроолор, кепилдик жана кардарларды тейлөө камтылган.
Preview ANCEL AS500 OBD-II диагностикалык куралынын колдонуучу колдонмосу
ANCEL AS500 OBD-II диагностикалык сканери үчүн коопсуздук чараларын, OBD-II жөнүндө жалпы маалыматты, куралдын функцияларын колдонуу боюнча кеңири көрсөтмөлөрдү, мисалы, DTC издөө, маалымат агымы, I/M даярдыгы, тоңдуруу кадры, O2 сенсорунун сыноолору, EVAP сыноолору, унаа жөнүндө маалыматты алуу, программалык камсыздоону жаңыртуу жана пикирди камтыган кеңири колдонуучу колдонмосу.
Preview ANCEL AD530 Pro User's Manual
User's manual for the ANCEL AD530 Pro, a 2-in-1 OBDII and battery diagnostic tool. Learn about safety precautions, product specifications, tool description, and how to use its various functions like reading codes, erasing codes, I/M readiness, data stream, freeze frame, O2 sensor test, on-board monitor test, evap system test, and vehicle information.
Preview ANCEL BM200 Батарея Монитор Колдонуучунун колдонмосу
ANCEL BM200 батарея мониторунун кеңири колдонуучу колдонмосу, анда анын мүнөздөмөлөрү, функциялары, орнотуусу, колдонмону колдонуусу жана 12V унаанын батареялары үчүн мүчүлүштүктөрдү оңдоо боюнча кеңири маалымат берилген.