Alfred DB1W-BL

Alfred Touchscreen Smart Keypad Pin Door Lock Combo with Wi-Fi Connect Bridge & Bluetooth (DB1W)

User Manual

1. Продукт бүтүп калдыview

The Alfred Touchscreen Smart Keypad Pin Door Lock Combo with Wi-Fi Connect Bridge & Bluetooth (DB1W) is an advanced security solution designed for residential use. This system combines a robust smart lock with a touchscreen keypad, Bluetooth connectivity, and a Wi-Fi Connect Bridge for remote access and smart home integration.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

Alfred DB1W Smart Lock and Wi-Fi Connect Bridge

Image: The Alfred DB1W Smart Lock (left) and the Alfred Connect Wi-Fi Bridge (right), showcasing толук система.

2. Орнотуу жана орнотуу

The Alfred DB1W Smart Lock is designed for easy DIY installation, replacing your existing deadbolt. For detailed, step-by-step visual instructions, it is highly recommended to use the BILT app.

2.1. Орнотууга чейинки текшерүү тизмеси

BILT App for 3D Interactive Instructions

Image: Screenshot of the BILT app interface, highlighting its 3D interactive instructions for assembly and installation. The app is available on both the App Store and Google Play.

2.2. Механикалык монтаж

Follow the instructions provided by the BILT app or the included quick start guide to physically install the lock components onto your door. This typically involves removing your old deadbolt, installing the new latch, exterior keypad, interior assembly, and connecting the necessary cables.

жарылды view of Alfred DB1W Smart Lock components

Сүрөт: жарылган view illustrating the various components of the Alfred DB1W Smart Lock, including the exterior keypad, interior assembly, deadbolt mechanism, and battery compartment, aiding in understanding the installation process.

2.3. Баштапкы орнотуу жана жупташтыруу

  1. Батареяны орнотуу: Insert 4 AA alkaline batteries into the interior assembly of the lock.
  2. Download Alfred Home App: Download the "Alfred Home" app from your device's app store.
  3. Эсеп түзүү: Open the app and create a new user account or log in.
  4. Түзмөк кошуу: Follow the in-app instructions to add your DB1W smart lock. This typically involves putting the lock into pairing mode and connecting via Bluetooth.
  5. Install Alfred Connect Bridge: Plug the Alfred Connect Wi-Fi Bridge into a power outlet within close proximity to your smart lock and your Wi-Fi router. Follow the app's instructions to connect the bridge to your home Wi-Fi network and pair it with your lock.

3. Operating Your Smart Lock

3.1. Баскычтоптун иштеши

The touchscreen keypad allows for secure code-based entry.

Alfred DB1W Smart Lock Keypad

Сүрөт: жакын план view of the Alfred DB1W Smart Lock's touchscreen keypad, showing the numerical layout and the Alfred logo.

3.2. Alfred Home App Control

The Alfred Home app provides comprehensive control and monitoring of your smart lock.

3.3. Voice Control (via Alfred Connect Bridge)

With the Alfred Connect Wi-Fi Bridge, you can integrate your lock with compatible smart speakers (e.g., Amazon Alexa, Google Assistant) for voice commands.

4. Техникалык тейлөө

4.1. Батареяны алмаштыруу

The Alfred DB1W Smart Lock operates on 4 AA alkaline batteries. The lock will provide a low battery warning through audible alerts and a visual indicator on the keypad (a battery icon). It is recommended to replace all four batteries simultaneously when this warning appears.

Эскертүү: If batteries completely fail, the lock can be temporarily powered via a micro-USB port located on the bottom of the exterior keypad for emergency access. Connect a standard micro-USB power bank or charger to provide temporary power to enter your code.

4.2. Тазалоо

To clean the touchscreen keypad and other surfaces, use a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.

5. Кыйынчылыктарды

This section addresses common issues you might encounter with your Alfred DB1W Smart Lock.

КөйгөйМүмкүн себепЧечим
Кулпу баскычтоп жазуусуна жооп бербейт.Dead batteries; incorrect code; keypad not activated.Replace batteries; ensure correct code is entered; touch keypad to activate before entering code.
Alfred Connect Bridge frequently disconnects or fails to connect to lock/Wi-Fi.Poor Wi-Fi signal; interference; bridge too far from lock or router; temporary network issue.Relocate bridge closer to both lock and Wi-Fi router; ensure strong Wi-Fi signal; restart router and bridge; check for firmware updates for the bridge via the Alfred Home app.
Кулпу колдонмонун буйруктарына жооп бербейт.Bluetooth/Wi-Fi off on phone; lock out of Bluetooth range; bridge disconnected; app issue.Ensure Bluetooth is on and you are within range for direct connection; verify bridge connection for remote access; restart app; reinstall app if persistent.
Low battery warning persists after battery replacement.Batteries not new or incorrect type; poor contact.Ensure new, high-quality alkaline batteries are used; check battery orientation and contacts.
Lock is jammed or difficult to operate manually.Misalignment during installation; door frame issues.Check door and frame alignment; ensure deadbolt moves freely without obstruction. Re-check installation steps if necessary.

5.1. Заводдук абалга кайтаруу

A factory reset will erase all user codes and settings, restoring the lock to its original state. Refer to the Alfred Home app or the official Alfred support website for specific instructions on performing a factory reset for your DB1W model, as the procedure may vary slightly.

6. Техникалык шарттар

ӨзгөчөлүкДеталь
БрендАльфред
Модель номериDB1W-BL
ТүсКара
Power SourceБатарея менен иштейт (4 x AA щелочтуу)
Байланыш технологиясыBluetooth, Wi-Fi (via Alfred Connect Bridge)
Шайкеш түзмөктөрSmartphone, Smart Speaker
Элементтин өлчөмдөрү (L x W x Y)0.55 x 2.56 x 5.91 дюйм
Элемент Салмагы4 фунт
МатериалМеталл
Орнотуу түрүЗымсыз DIY
Камтылган компоненттерAlfred Connect WIFI Integration Accessory, DB1-A Bluetooth enabled smart lock, Alfred Home App
UPC628341330138

7. Кепилдик жана колдоо

For warranty information, technical support, or further assistance, please contact Alfred International Inc., the manufacturer of this product.

Additional protection plans may be available for purchase from retailers. Please refer to your purchase documentation for details on any extended warranties or service agreements.

Тектеш документтер - DB1W-BL

Preview Alfred Connect V2 Колдонуучунун колдонмосу: Тез баштоо жана орнотуу нускамалары
Alfred Connect V2 Wi-Fi көпүрөңүз менен баштаңыз. Бул колдонмо колдонмону жүктөп алуу, түзмөктү жупташтыруу, индикатор жарыктары, баштапкы абалга келтирүү процедуралары жана акылдуу үй тажрыйбасы үчүн үн жардамчысынын интеграциясын камтыйт.
Preview Alfred DB2 Series Smart Home Touchscreen Deadbolt Quick Start Guide
Quick start guide for the Alfred DB2 Series Smart Home Touchscreen Deadbolt, covering installation, app setup, PIN code management, and basic operation. Learn how to set up your smart lock, manage user PINs, and operate the lock.
Preview Alfred Connect V2 Quick Start Guide
Alfred Smart Locks үчүн Alfred Connect V2 WIFI көпүрөңүздү орнотуу боюнча кыска нускама, анын ичинде колдонмону жүктөп алуу, түзмөк туташуусу, көрсөткүчтөр жана үн жардамчысынын интеграциясы.
Preview Alfred DB2S Smart Lock Quick Start Guide
Жаңы Alfred DB2S Smart Home Touchscreen Deadbolt менен баштаңыз. Бул тез баштоо колдонмо кулпуну орнотуу, PIN кодду башкаруу, иштетүү жана орнотуу боюнча көрсөтмөлөрдү берет.
Preview Alfred DB1S сериясын программалоо боюнча нускамалар - Smart Lock орнотуу боюнча колдонмо
Alfred DB1S сериясындагы акылдуу кулпу үчүн комплекстүү программалоо көрсөтмөлөрү жана орнотуу боюнча колдонмо. Орнотуу, PIN коддорду программалоо, автоматтык түрдө кайра кулпулоо жана "Айрым режимдер" сыяктуу функцияларды колдонуу жана Alfred акылдуу кулпуңуздагы көйгөйлөрдү чечүү жолдорун үйрөнүңүз.
Preview Alfred DB1 сериясындагы акылдуу кулпуну программалоо боюнча нускамалар
Alfred DB1 сериясындагы акылдуу кулпу үчүн баштапкы орнотууну, колдонуучунун PIN кодун башкарууну, "Алыста" жана "Үнсүз" режимдери сыяктуу ар кандай иштөө режимдерин, Bluetooth жана Z-Wave жөндөөлөрүн жана мүчүлүштүктөрдү оңдоону камтыган комплекстүү программалоо көрсөтмөлөрү.