1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the AKO AKO-15692 Three-Phase PROPlus Basic Electronic Control Panel with Defrost 10200W. Please read this manual thoroughly before installation and operation.
1-сүрөт: Фронт view of the AKO AKO-15692 control panel. This image displays the front of the AKO AKO-15692 control panel. On the left, a digital display shows '-19.4' with 'ECO' and defrost indicators. Below the display are navigation buttons (up, down, set, escape, power, question mark, light). The right side features a transparent hinged cover, revealing internal circuit breakers and a rotary switch.
2. Коопсуздук маалыматы
Always observe the following safety precautions to prevent injury and damage to the device:
- Орнотуу жана тейлөө квалификациялуу кызматкерлер тарабынан гана аткарылышы керек.
- Disconnect power before performing any work on the control panel.
- Электр шоктун алдын алуу үчүн туура жерге туташтырууну камсыз кылыңыз.
- Do not expose the unit to moisture or extreme temperatures outside its operating range.
- Электр тармагына туташуудан мурун, бардык туташуулардын бекем жана туура экенин текшериңиз.
3. Продукт бүтүп калдыview
The AKO-15692 is a three-phase electronic control panel designed for refrigeration systems requiring defrost management. It integrates control, protection, and monitoring functions for optimal performance and energy efficiency.
Негизги өзгөчөлүктөрү:
- Three-phase power compatibility (up to 10200W).
- Integrated defrost control.
- Digital display for temperature and status.
- User-friendly control interface.
- Robust enclosure for industrial environments.
4. Орнотуу жана орнотуу
4.1 Пакеттен чыгаруу
Carefully unpack the control panel and inspect it for any signs of damage. Retain the packaging materials for future transport or storage.
4.2 Монтаждоо
The unit is designed for screw-mounted installation. Choose a dry, well-ventilated location away from direct heat sources or excessive vibration. Ensure sufficient space for wiring and ventilation.
- Mark the mounting points on the wall using the panel's dimensions.
- Drill appropriate holes and insert wall plugs if necessary.
- Secure the control panel to the wall using suitable screws.
4.3 Электр байланыштары
All electrical connections must comply with local and national electrical codes. Refer to the wiring diagram provided inside the panel cover for specific connections.
- Электр камсыздоо: Connect the three-phase power supply to the designated terminals.
- Компрессор: Connect the compressor load to the appropriate output terminals.
- Defrost Heaters: Connect defrost heaters to their dedicated output terminals.
- Сенсорлор: Connect temperature sensors to the specified input terminals.
- Негиздөө: Ensure all grounding connections are properly made.
Warning: Incorrect wiring can lead to severe damage or electrical shock. Consult a qualified electrician if unsure.
5. Иштөө нускамалары
5.1 Күйгүзүү/өчүрүү
басыңыз ⏻ (Power) button to turn the unit on or off. The digital display will illuminate upon power-on.
5.2 Дисплей жана навигация
The digital display shows the current temperature or system status. Use the following buttons for navigation and settings:
- ЖӨНДӨӨ: Enter/confirm settings.
- ▲ (Up): Increase values or navigate up.
- ▼ (Down): Decrease values or navigate down.
- ESC: Exit menu or cancel operation.
- ?: Access help or information.
- ☀︎ (Light): Control internal light (if applicable) or display brightness.
5.3 Температураны орнотуу
- басыңыз SET button. The current setpoint will flash.
- колдонуу ▲ or ▼ каалаган температураны тууралоо үчүн баскычтар.
- Басыңыз SET again to confirm the new setpoint.
5.4 Эритүү цикли
The unit features automatic defrost control. Parameters such as defrost interval and duration can be configured through the settings menu. Consult the detailed programming section in the full manual for advanced configurations.
6. Техникалык тейлөө
Regular maintenance ensures optimal performance and longevity of the control panel.
6.1 Тазалоо
- Тазалоодон мурун электрди өчүрүңүз.
- сыртын жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Ички компоненттерге нымдуулуктун кирбешин камсыз кылыңыз.
6.2 Текшерүүлөр
Төмөнкүлөрдү мезгил-мезгили менен текшерип туруңуз:
- Зымдар: Check for loose or damaged wires.
- Терминалдар: Ensure all terminal connections are tight.
- Корпусу: Look for any signs of physical damage or corrosion.
- Вентиляция: Желдетүү тешиктери ачык жана тоскоолдуксуз экенине ынаныңыз.
7. Кыйынчылыктарды
This section addresses common issues. For more complex problems, contact technical support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Панель күйбөйт. | No power supply; Blown fuse/tripped breaker. | Check main power supply; Inspect fuses/breakers and reset if necessary. |
| Температураны туура эмес окуу. | Faulty sensor; Sensor incorrectly placed. | Check sensor connections; Verify sensor placement; Replace sensor if faulty. |
| Defrost not initiating. | Incorrect defrost settings; Defrost heater fault. | Review defrost parameters in settings; Check defrost heater and wiring. |
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | АКО-15692 |
| Бренд | АКО |
| Power Rating | 10200 Вт |
| Фаза | Үч фазалуу |
| Орнотуу түрү | Бурамага орнотулган |
| Эритүү функциясы | Интеграцияланган |
9. Кепилдик жана колдоо
9.1 Кепилдик маалыматы
AKO products are covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official AKO webтолук шарттары жана шарттары үчүн сайт.
9.2 Техникалык колдоо
For technical assistance, spare parts, or service inquiries, please contact AKO customer support. Have your model number (AKO-15692) and purchase date ready when contacting support.
Байланыш маалыматы (мисалы, телефон, электрондук почта, website) can typically be found on the product packaging or the official AKO webсайт.
