Bousnic Replacement Remote for Dog Training Collar 670 User Manual

Introduction

This manual provides detailed instructions for the Bousnic Replacement Remote for Dog Training Collar 670. This remote is designed to be used with a compatible Bousnic Dog Training Collar 670 receiver (not included with this replacement remote). It offers various training modes to assist in effective dog training.

Image: Bousnic Dog Training Collar 670 Replacement Remote. This image displays the remote control unit, highlighting its display screen, mode buttons (Static, Vibra), and side controls for beep and intensity adjustment. The Bousnic brand logo is visible at the bottom.

Жайгашуу

1. Preparing the Receiver Collar (if applicable)

Before using the remote with a receiver collar, ensure the receiver is properly prepared. This involves installing the appropriate contact points based on your dog's coat length.

• Байланыш пункттары: For short or thin-haired dogs, use the provided short contact points with silicone caps.
• Spring Sheet: For long-haired or thick-haired dogs, you can use the spring sheet in conjunction with the contact points to ensure proper contact through the fur.
• Коопсуз орнотуу: Screw in the contact points securely. When installing silicone caps, push them in until there's no air or space left between the metal tips and the black rubber caps to prevent them from falling off easily.
• Эскертүү: If you prefer not to use the static (shock) mode, do not install the contact points or spring sheet.

2. Pairing the Remote with the Receiver

To establish communication between your replacement remote and the receiver collar, follow these pairing steps:

1. Ensure both the remote and the receiver collar are turned on.
2. On the receiver, quickly press the On/Off button 3 times in a row. You will hear a beep, indicating it's in pairing mode.
3. On the remote, press the Mode button to check if they are paired successfully. The remote's display should show the correct mode and level, and the receiver should respond.

For an alternative pairing method, you can also try the following:

1. Ресивер өчүрүлгөнүн текшериңиз.
2. Press and hold the power button on the receiver for 3 seconds until the light flashes alternately between red and green.
3. On the remote, press and hold the Beep and Vibration buttons at the same time to pair the receiver collar.
4. Once successfully paired, the receiver collar will beep 2 times and the green light will flash 3 times.

Пультту иштетүү

The Bousnic remote offers multiple modes and adjustable intensity levels to suit various training needs.

Машыгуу режимдери:

• Бип режими: Delivers an audible tone to get your dog's attention.
• Дирилдөө режими: Provides a gentle vibration as a warning or command.
• Static (Shock) Mode: Delivers a static correction. This mode has adjustable intensity levels from 1 to 16.

Adjusting Intensity Levels:

Use the rotary dial on the top of the remote to adjust the intensity level for the static (shock) mode. This allows for fine-tuning the correction to match your dog's sensitivity and training progress.

Remote Lock Feature:

The remote includes a security lock feature to prevent accidental activation of correction modes. Slide the lock switch on the side of the remote to engage or disengage the lock. This ensures that corrections are only delivered intentionally.

Кош каналды башкаруу:

The remote is capable of controlling two separate receiver collars. Use the "1" and "2" buttons on the remote to switch between controlling different collars, which is useful for training multiple dogs simultaneously (requires additional receiver collars, not included).

Техникалык тейлөө

• Заряддоо: The remote is rechargeable. Use the provided USB cable to charge the unit. The battery life is designed to last a long time between charges.
• Суу каршылык: The remote control unit is суу өткөрбөйт. Keep it away from water to prevent damage. The receiver collar (not included with this remote) is typically waterproof, but this remote is not.
• Тазалоо: Wipe the remote with a soft, dry cloth as needed. Avoid using harsh chemicals or abrasive materials.

Проблемаларды чечүү

No specific troubleshooting steps are provided in the product information. If you encounter issues, please ensure the remote and receiver are fully charged and properly paired. Refer to the pairing instructions in the Setup section. For further assistance, contact Bousnic customer support.

Техникалык шарттар