Introduction
This manual provides detailed instructions for the proper use and maintenance of your Nautica NST Chronograph 46mm Watch, Model NAPNSF301. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. This watch features a chronograph function, date display, and is water-resistant up to 100 meters (330 feet).
1-сүрөт: Фронт view of the Nautica NST Chronograph 46mm Watch, showcasing the dial, hands, and chronograph subdials.
Жайгашуу
1. Убакытты белгилөө
- Unscrew the crown (if applicable) and pull it out to the second click position.
- Саат жана мүнөт жебелерин керектүү убакытка жылдыруу үчүн таажыны буруңуз.
- Push the crown back into its normal position and screw it down firmly (if applicable) to ensure water resistance.
2. Датаны орнотуу
- Unscrew the crown (if applicable) and pull it out to the first click position.
- Rotate the crown to adjust the date. Avoid setting the date between 9:00 PM and 3:00 AM, as this may interfere with the automatic date change mechanism.
- Push the crown back into its normal position and screw it down firmly (if applicable) to ensure water resistance.
3. Билерикти тууралоо
The stainless steel bracelet is adjustable. For proper fit, it is recommended to have the bracelet adjusted by a professional jeweler or watch technician. Incorrect adjustment can damage the bracelet or watch.
2-сүрөт: Side view of the watch, highlighting the crown and chronograph pushers for time and function adjustments.
Иштөө нускамалары
1. Хронографтын функциясы
Your watch is equipped with a chronograph, allowing you to measure elapsed time.
- Баштоо/Токтоо: Press the upper pusher (A) to start the chronograph. Press it again to stop.
- Кайтаруу: While the chronograph is stopped, press the lower pusher (B) to reset all chronograph hands to their zero positions.
2. Сууга туруктуулук
This watch is water-resistant to 100 meters (330 feet). This rating makes it suitable for swimming and snorkeling, but not for scuba diving. Ensure the crown is always screwed down tightly (if applicable) and pushed in completely before exposing the watch to water. Do not operate the crown or pushers while the watch is wet or submerged.
3. Жаркыраган колдор
The hands feature luminous infill, which absorbs light and glows in low-light conditions. Exposure to bright light will enhance the glow effect.
Техникалык тейлөө
1. Тазалоо
Wipe the watch case and bracelet regularly with a soft, dry cloth to remove dirt and moisture. For stainless steel, a slightly damp кездеме, андан кийин кургак чүпүрөк колдонсо болот. Катуу химиялык заттарды же абразивдүү материалдарды колдонуудан алыс болуңуз.
2. Батареяны алмаштыруу
The watch is powered by a quartz movement requiring a battery. When the watch stops or the second hand begins to jump erratically (if applicable), the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
3. Суу өткөрбөөчү каражаттарга кам көрүү
To maintain the watch's water resistance, have the gaskets checked and replaced by a professional watch service center every 2-3 years, or after any impact or opening of the case back.
3-сүрөт: Артка view of the watch, showing the screw-down case back which contributes to its water resistance.
Проблемаларды чечүү
- Иштебей турган саат: Сааттын таажысы толугу менен ичине киргизилгенин текшериңиз. Эгерде саат дагы эле иштебей жатса, батарейканы алмаштыруу керек болушу мүмкүн.
- Хронограф колдору нөлгө кайтарылбайт: Эгерде хронографтын жебелери баштапкы абалга келтирүү баскычын баскандан кийин нөлдүк абалына келбесе, жөндөө үчүн кесипкөй саат технигине кайрылыңыз.
- Moisture under the crystal: If you notice condensation or moisture inside the watch, immediately take it to a qualified service center. This indicates a breach in water resistance.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | NAPNSF301 |
| Иштин диаметри | 46 миллиметр |
| Case Thickness | 12 миллиметр |
| Band Width | 22 миллиметр |
| Кыймыл түрү | Кварц |
| Сууга каршылыктын тереңдиги | 100 метр (330 бут) |
| Иштин материалы | Дат баспаган болот |
| Топтун материалы | Дат баспаган болот |
| Кристалл түрү | Минералдык айнек |
| Кошумча функциялар | Chronograph, Date Display, Luminous Hands |
Кепилдик маалымат
Your Nautica watch is covered by a limited warranty. The terms and conditions of this warranty typically cover manufacturing defects in materials and workmanship under normal use. For specific details regarding the warranty period, coverage, and how to make a claim, please refer to the warranty card included with your purchase or visit the official Nautica webсайт.
Кардарларды колдоо
For further assistance, service, or inquiries not covered in this manual, please contact Nautica customer service. Contact information can typically be found on the official Nautica webсайтында же саатыңыз менен кошо берилген кепилдик документтеринде.
