FITNATE Keyless Digital Door Knob with Keypad

Продукт бүттүview

The FITNATE Keyless Digital Door Knob provides enhanced security and convenience for your home, apartment, or office. Featuring a touchscreen keypad, multiple unlocking methods, and robust construction, this electronic door knob is designed for ease of use and reliable performance.

Image: The FITNATE Keyless Digital Door Knob, showcasing the keypad and included spare keys.

Коопсуздук маалыматы

• Always use brand-new AA alkaline batteries (not included) and ensure correct polarity alignment (+/-) during installation. Proper power source is crucial for consistent operation.
• For optimal performance and security, perform a factory reset on the lock before initial setup. This ensures a clean configuration slate.
• Keep spare keys in a secure location outside the property to prevent lockout in case of battery depletion or electronic malfunction.
• Avoid exposing the lock to extreme temperatures or direct water spray, although it is IP65 weatherproof.

Техникалык шарттар

Орнотуу боюнча колдонмо

This smart door knob is designed for easy installation with just a screwdriver. Follow these steps carefully:

1. эшикти даярдоо: Ensure your door has the correct hole diameter (2-1/8" or 54mm) and door thickness (1-3/8" to 2-1/8" or 35-54mm).
2. Adjust Latch Length: Adjust the strike plate spacing to 60-70cm (approx. 23.62-27.56 inches) for effortless operation.
3. Latchbolt орнотуу: Insert the latchbolt into the door edge. Ensure the latch's square hole is horizontal. Secure with screws.
4. Сырткы монтажды орнотуу: Fix the exterior rubber plate and install the shaft. Insert the two positioning columns and three screw casings.
5. Зымдарды туташтыруу: Carefully connect the wire from the exterior assembly to the interior assembly.
6. Ички монтаждоо: Secure the interior assembly to the door using the provided screws.
7. Mount Knob: Attach the interior knob and tighten.
8. Батареяларды салыңыз: Insert 4 AA alkaline batteries into the interior assembly.

Image: Visual guide showing the easy installation process and suitability for various door types.

Иштөө нускамалары

Initial Setup & Master Code

Before programming, it is required to change the default master code to your own (4-8 digits). The default master code is 12345678.

1. Press the 'YAMIRY' button twice.
2. Учурдагы башкы кодду киргизиңиз (демейки: 12345678).
3. Press '1' to change the master code.
4. Enter your new master code (4-8 digits) followed by the 'YAMIRY' button.
5. Repeat your new master code followed by the 'YAMIRY' button to confirm. A green light flash indicates success.

Колдонуучунун коддору кошулууда

You can set up to 15 user passcodes for family, guests, or tenants.

1. Press the 'YAMIRY' button twice.
2. Негизги кодуңузду киргизиңиз.
3. Press '2' to add a user code.
4. Enter the new user code (4-8 digits) followed by the 'YAMIRY' button.
5. Repeat the new user code followed by the 'YAMIRY' button to confirm. A green light flash indicates success.

Кулпуну ачуу ыкмалары

• Кулпуну ачуу коду: Enter your valid user code or master code on the touchscreen keypad. The backlight keyboard lights up when pressing keys.
• Spare Key Unlock: Use the provided spare keys for manual unlocking. This is useful for emergencies or when batteries are depleted.
• Emergency USB Power: In case of battery depletion, connect a power bank to the emergency USB port to temporarily power the lock and use a passcode.

Image: The sensitive touchscreen keypad with anti-peeking code functionality.

Image: Features including low battery alarm, emergency USB port, and spare key for emergency use.

Өзгөчөлүктөрү

• Автоматтык кулпу: The door will automatically lock 2.5 seconds after closing for enhanced security.
• Password Anti-peeking: Input random digits before or after your actual passcode to prevent others from guessing your code.
• Үнсүз режим: Option to disable sound for quiet operation.
• Батареянын аздыгы жөнүндө эскертүү: Visual and audible alerts when batteries are low.
• IP65 аба ырайы: Designed to work reliably in various weather conditions.

Image: The auto-lock function, where the door automatically locks 2.5 seconds after closing.

Image: The ability to store up to 15 user passcodes for various users.

Image: Security features like anti-peeking password and an alarm to safeguard your family.

Техникалык тейлөө

• Regularly check battery levels and replace all four AA batteries when the low battery alert is activated.
• Clean the keypad surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Ensure the door frame and strike plate are free from obstructions to allow smooth latch operation.
• Periodically test all programmed passcodes and the spare key to ensure proper functionality.

Проблемаларды чечүү

• Кулпу жооп бербей жатат: Check battery installation and replace with new batteries if necessary. Use the emergency USB port with a power bank if batteries are completely dead.
• Өткөрүүчү код иштебей жатат: Ensure the correct master code or user code is entered. Perform a factory reset if you suspect programming issues (this will delete all user codes).
• Latch not retracting smoothly: Verify the strike plate spacing is correctly adjusted (60-70mm). Check for any physical obstructions in the door frame or latch mechanism.
• Keypad lights not working: This may indicate low battery. Replace batteries.

Кепилдик жана колдоо

This FITNATE product comes with a 1 жылдык кепилдик сатып алынган күндөн тартып. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.

For technical support, troubleshooting assistance, or warranty inquiries, please contact FITNATE customer service. Refer to the contact information provided with your product packaging or visit the official FITNATE webсайт.

We are committed to providing high-quality products and excellent customer service. Your satisfaction is our priority.