OOYCYOO MPPT Solar Charge Controller 60A User Manual

1. Киришүү

The OOYCYOO MPPT Solar Charge Controller 60A is an advanced device designed to manage power flow from your solar panels to your battery bank. It utilizes Maximum Power Point Tracking (MPPT) technology to optimize energy harvesting, ensuring efficient charging for 12V, 24V, 36V, and 48V battery systems. This controller automatically identifies the system voltage and is compatible with various battery types, including lead-acid and lithium.

Сүрөт 1.1: Алдыңкы view of the OOYCYOO MPPT Solar Charge Controller 60A, showing the LCD display and control buttons.

2. Продукциянын өзгөчөлүктөрү

• MPPT технологиясы: Maximizes power extraction from solar panels.
• Automatic System Voltage Идентификация: Supports 12V, 24V, 36V, and 48V systems.
• Жогорку натыйжалуулугу: DC/DC transfer efficiency up to 98.7%.
• LCD арткы жарык дисплейи: Provides clear real-time operational data.
• Өркүндөтүлгөн муздатуу: Scientifically designed convection cooling with integrated fan for optimal temperature management.
• 4-Сtage Батареяны заряддоо: Includes Bulk, Boost, Float, and Equalization for efficient and safe battery charging.
• Multi-Battery Compatibility: Supports lead-acid (sealed, gel, flooded) and lithium batteries (LFP), with user-customizable parameters.
• Комплекстүү коргоо: Multiple safety features to protect the controller and connected components.
• Negative Ground Design: Enhances safety during operation.

Сүрөт 2.1: Бүттүview of the controller's features, including LCD display, terminals, and protection icons.

3. Safety Precautions and Protection Functions

To ensure safe operation and prevent damage, observe the following safety guidelines. The controller incorporates several protection mechanisms:

• PV Current/Power Overload Protection
• PV Short Circuit Protection
• PV тескери полярдуулукту коргоо
• Night Reverse Charging Protection
• Батареяны тескери полярдуулуктан коргоо
• Батарея Overvoltage Коргоо
• Battery Over-discharge Protection
• Батареянын ысып кетүүсүнөн коргоо
• Controller Overheating Protection
• Lithium Battery Low Temperature Protection
• Кыска туташуулардан коргоону жүктөө
• Ашыкча жүктөн коргоо
• TVS High Voltage Transients Protection

Always connect the battery first, then the solar panels, and finally the load. Disconnect in the reverse order.

4. Орнотуу жана орнотуу

Follow these steps for proper installation of your MPPT solar charge controller:

1. Монтаждоо: Choose a dry, well-ventilated location away from direct sunlight and heat sources. Ensure adequate space around the controller for air circulation.
2. Батарея туташуу: Connect the battery cables to the controller's battery terminals (labeled '+' and '-'). Ensure correct polarity. The controller will automatically detect the battery voltage. Use 10 AWG wires for power terminals.
3. Күн панелинин туташуу: Connect the solar panel cables to the controller's PV input terminals (labeled 'SOLAR +' and '-'). Ensure correct polarity. Verify that the open circuit voltage (Voc) and power of your solar array do not exceed the controller's maximum limits for your system voltage.
4. Туташуу жүктөө (милдеттүү эмес): Connect your DC load to the controller's load terminals (labeled 'LOAD +' and '-'). Ensure correct polarity.

Image 4.1: Diagram illustrating the connection of solar panels, battery, and DC load to the MPPT controller. It also shows support for parallel connection of two 60A controllers for a total of 120A.

Сүрөт 4.2: Мисample of the MPPT Solar Charge Controller integrated into a residential solar power system, managing power for various household appliances.

Сүрөт 4.3: Каптал view of the controller highlighting the solar, battery, and load terminals for wiring.

5. Иштөө нускамалары

Once connected, the controller will automatically begin operation. The LCD display provides real-time information:

• PV киргизүү: Томду көрсөтөтtage жана күн панелдеринен ток.
• Батарея: Батареянын көлөмүн көрсөтөтtage, charge status, and percentage.
• Жүктөө чыгаруу: том көрсөтөтtage and current supplied to the load.

Башкаруу баскычтары:

The controller features four buttons (A, B, C, D) and a SET button for navigation and parameter adjustment. Refer to the on-screen menu for specific functions. Pressing A+D for 5 seconds typically initiates a reset.

Муздатуу желдеткичинин иштеши:

The integrated cooling fan activates automatically when the internal temperature exceeds 45°C and deactivates when the temperature drops below 40°C, ensuring optimal performance and longevity.

6. Battery Charging Methods

The OOYCYOO MPPT controller employs a 4-stage charging algorithm to optimize battery health and lifespan:

• Жапырт акы: Delivers maximum current to rapidly charge the battery.
• Тездетет акысыз: Charges the battery to a higher voltage to ensure full charge.
• Float акысы: Maintains the battery at a safe voltage, өзүн-өзү бошотуу үчүн компенсация.
• Теңдөө: Periodically overcharges flooded lead-acid batteries to balance cell voltages.

Pre-set charging parameters are available for sealed, gel, flooded lead-acid, and LFP (lithium iron phosphate) batteries. Users can also customize charging parameters to suit other battery types or specific requirements.

7. Техникалык шарттар

Image 7.1: Detailed table showing original battery parameters for 12V, 24V, and 48V systems, including float voltage, undervolvoltage protection, and maximum PV input power. Also includes PV module series connection guidelines.

Сүрөт 7.2: View of the internal components, highlighting the copper coil transformer and capacitance, which contribute to the controller's efficiency and stability.

8. Кыйынчылыктарды

If you encounter issues with your OOYCYOO MPPT Solar Charge Controller, consider the following general troubleshooting steps:

• Дисплей/кубат жок: Check all wiring connections, especially the battery connection, for proper polarity and secure contact. Ensure the battery has sufficient charge.
• Заряддоо жок: Verify solar panel connections and ensure panels are receiving adequate sunlight. Check PV input voltage on the display. Confirm battery connections are secure.
• Ката коддору: If the LCD displays an error code, refer to the specific error message for guidance. If not listed in this manual, consult the manufacturer's support resources.
• Ашыкча ысып кетүү: Ensure the controller is installed in a well-ventilated area and that the cooling fan is operating correctly. Clear any obstructions around the vents.

For persistent problems, contact customer support.

9. Техникалык тейлөө

Regular maintenance helps ensure the longevity and optimal performance of your solar charge controller:

• Тазалоо: Periodically clean the exterior of the controller with a dry cloth to remove dust and debris. Ensure ventilation openings are clear.
• Туташуу текшерүү: Annually inspect all wiring connections for tightness and corrosion. Re-tighten as necessary.
• Экологиялык текшерүү: Ensure the installation environment remains dry and free from excessive temperatures or humidity.

10. Кепилдик жана колдоо

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or further assistance, please contact OOYCYOO customer service.

You may also find additional resources by scanning the QR code on the product label or visiting the following link: http://qr61.cn/oQXA1T/qsECN8rL