Mebus Electronic Alarm Clock Model 785871 User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Mebus Electronic Alarm Clock, Model 785871. Please read this manual thoroughly before using the device to ensure proper function and longevity.

The Mebus Electronic Alarm Clock is a digital, radio-controlled device designed to provide accurate time, date, and temperature readings, along with reliable alarm functions. Its modern design and clear display make it suitable for various room types, especially bedrooms.

Пакеттин мазмуну

• Mebus Electronic Alarm Clock (Model 785871)
• Колдонуучунун Колдонмосу (бул документ)

Эскертүү: Батареялар камтылган эмес жана өзүнчө сатып алынышы керек.

Жайгашуу

1. Батареяны орнотуу

1. Ойготкуч сааттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
2. Бөлүктү ачуу үчүн капкакты жылдырыңыз же ачыңыз.
3. Insert the required batteries (e.g., 2 x AAA) according to the polarity indicators (+ and -) inside the compartment.
4. Батарея бөлүкчөсүнүн капкагын бекем орнотуңуз.

Important: Ensure correct battery polarity to prevent damage to the device.

2. Initial Power On and Radio Controlled Time Synchronization

Upon battery installation, the clock will power on and automatically begin searching for the radio time signal. This process may take several minutes to an hour, depending on your location and signal strength.

• Place the clock near a window or in an open area for optimal signal reception.
• A signal icon (often a radio tower or wave symbol) on the display will flash during synchronization and become solid once the time is successfully set.
• If synchronization fails, the clock will typically default to a standard time (e.g., 12:00 AM) and you may need to set the time manually (see "Setting Time Manually" in the Operating section).

Сүрөт 1: Алдыңкы view of the Mebus Electronic Alarm Clock, showing the digital display with time, date, day, and temperature, along with control buttons.

Иштөө нускамалары

1. Button Overview

The clock features several buttons for control. The main buttons are typically:

• SET баскычтары: Used to enter setting modes for time, alarm, etc. There are two 'SET' buttons, likely for different functions or for confirming settings.
• MODE баскычы: Cycles through display modes or setting options.
• ▲ / ▼ buttons: Adjust values (increase/decrease) during setting modes.

2-сүрөт: Бурчтуу view of the Mebus Electronic Alarm Clock, highlighting the arrangement of the control buttons below the digital display.

2. Setting Time Manually (if radio control is unavailable)

1. Press and hold the appropriate SET button (refer to specific button labels on your device, often labeled "TIME SET" or similar) until the time display flashes.
2. колдонуу ▲ жана ▼ сааттарды тууралоо үчүн баскычтар.
3. басыңыз SET button again to move to minutes, then use ▲ жана ▼ тууралоо.
4. Басууну улантыңыз SET to cycle through other settings like year, month, and day, adjusting each with ▲ жана ▼.
5. басыңыз SET button one last time or wait a few seconds for the clock to exit setting mode.

3. Ойготкучту орнотуу

1. басып, кармап туруңуз SET button associated with the alarm function (often indicated by an alarm icon or "ALARM SET"). The alarm time will flash.
2. колдонуу ▲ жана ▼ каалаган ойготкуч саатын коюу үчүн баскычтар.
3. Ойготкучту басыңыз SET button again to move to minutes, then use ▲ жана ▼ тууралоо.
4. Ойготкучту басыңыз SET button one last time or wait for the clock to exit setting mode.
5. To activate/deactivate the alarm, there is usually a dedicated switch or button (often on the side or back, or a quick press of an alarm SET button). Look for an alarm icon on the display to confirm activation.

4. Тындырма функциясы

When the alarm sounds, press the large button on the top of the clock (if present, or a designated snooze button) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes). To turn off the alarm completely, press any other button or flip the alarm switch off.

5. Display Modes and Temperature Unit Selection

• Көрсөтүү режимдери: басыңыз РЕЖИМ button to cycle through different display information, such as time, date, and potentially other features.
• Температура бирдиги: To switch between Celsius (°C) and Fahrenheit (°F) for the temperature display, locate a small button or switch, often on the back or side of the unit, or it might be an option within the РЕЖИМ орнотуулар.

Техникалык тейлөө

1. Тазалоо

• Wipe the clock's exterior with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or electronic components.
• Ар кандай тешиктерге ным кирүүдөн сактаңыз.

2. Батареяны алмаштыруу

• When the display dims or functions become erratic, it is time to replace the batteries.
• Follow the "Battery Installation" steps in the Setup section.
• Эски батареяларды жергиликтүү эрежелерге ылайык таштаңыз.

Проблемаларды чечүү

Техникалык шарттар

• Бренд: Mebus
• Модель номери: 785871 (also known as Mebus 25800)
• Дисплей түрү: Санарип
• Стиль: Заманбап
• Өзгөчө өзгөчөлүгү: Ойготкуч
• Кубат булагы: Батарея менен иштейт (Батареялар камтылган эмес)
• Бөлмө түрү: Уктоочу бөлмө
• Форма: Square-ish
• Материал: Пластик
• Өлчөмдөрү: 5.12 x 2.95 x 2.13 дюйм (Пакеттин өлчөмдөрү)
• Элемент Салмагы: 4.9 унция

Колдоо

For further assistance or inquiries not covered in this manual, please refer to the Mebus official website or contact their customer support. Keep your product model number (785871) handy when seeking support.

Note: Specific contact details are not provided in this document.