Crane x HALLS 2-in-1 Warm Mist Humidifier and Steam Inhaler User Manual

1. Киришүү

This manual provides instructions for the safe and effective use of your Crane x HALLS 2-in-1 Warm Mist Humidifier and Steam Inhaler. This device offers dual functionality to help alleviate symptoms associated with dry air, colds, and congestion. Please read all instructions carefully before operation and retain this manual for future reference.

Маанилүү коопсуздук маалыматы:

• Always place the unit on a firm, flat, water-resistant surface away from children and pets.
• Do not operate the unit without water in the tank.
• The mist produced is warm. Avoid direct contact with the mist output to prevent burns.
• Толтуруудан, тазалоодон же жылдыруудан мурун түзмөктү розеткадан сууруп коюңуз.
• Аба желдеткичтерин жаап албаңыз.

2. Продукциянын өзгөчөлүктөрү

• 2-ин-1 Функциясы: Operates as a warm mist humidifier or a personal steam inhaler.
• Vapor Pad Compatible: Designed for use with HALLS Vapor Pads for enhanced relief.
• Steam Inhaler: Provides a non-medicated alternative for cough and cold symptom relief.
• Тазалоо оңой: Features detachable and removable components for simplified cleaning.
• Жылуу туман нымдагыч: 0.5-gallon tank capacity, operates quietly for up to 8 hours.
• Filter-Free Operation: No replacement filters required.
• Автоматтык түрдө өчүрүү: Safety feature automatically turns off the unit when the water level is low.
• Камтуу: Effective in areas up to 250 square feet.

3. Бөлүктөрдү идентификациялоо

Familiarize yourself with the components of your 2-in-1 unit:

Сүрөт 1: Labeled diagram of the Crane x HALLS 2-in-1 unit, showing the Mist Output + Medicine Cup, Removable 0.5 Gallon Tank, Steam Inhaler Mask, Clean Control Antimicrobial base, and One Touch Control button.

• Mist Output / Medicine Cup: Top section where mist is released, includes a small cup for vapor pads or liquid inhalants.
• Removable 0.5 Gallon Tank: Water reservoir for humidifier mode.
• Steam Inhaler Mask: Attachment used for personal steam inhalation.
• Clean Control Antimicrobial Base: Негизги блок жылытуучу элементти жана башкаруу элементтерин камтыйт.
• One Touch Control: Power button and mist setting control.

4. Орнотуу нускамалары

4.1 Баштапкы орнотуу

1. Remove all packaging materials and place the unit on a flat, water-resistant surface.
2. Улантуудан мурун бирдиктин розеткадан ажыратылганын текшериңиз.

4.2 Humidifier Mode Setup

Сүрөт 2: The Crane x HALLS 2-in-1 unit assembled for humidifier operation, showing the clear water tank and mist output.

1. Суу сактагычты базадан алып салыңыз.
2. Unscrew the tank cap and fill the tank with cool, clean tap water. Do not fill with hot water.
3. Бактын капкагын бекем ордуна коюңуз.
4. Place the filled water tank back onto the base, ensuring it is seated correctly.
5. Ensure the mist output cover is properly in place.

4.3 Steam Inhaler Mode Setup

Сүрөт 3: The Crane x HALLS 2-in-1 unit with the steam inhaler mask attached, ready for use.

1. Remove the water tank and mist output cover from the base.
2. Fill the base reservoir with cool, clean tap water up to the indicated fill line. Do not overfill.
3. Attach the steam inhaler mask directly onto the base, ensuring it clicks into place.
4. If using a HALLS Vapor Pad, insert it into the designated slot on the inhaler mask or medicine cup.

5. Иштөө нускамалары

5.1 Жалпы операция

1. Агрегатты стандарттуу электр розеткасына сайыңыз.
2. Press the power button once to turn the unit on. The indicator light will illuminate.
3. The unit will begin producing warm mist or steam.
4. Түзмөктү өчүрүү үчүн кубат баскычын кайра басыңыз.
5. The unit features an automatic shut-off when the water level is too low.

5.2 Using as a Humidifier

Сүрөт 4: The humidifier operating in a room, demonstrating typical placement for optimal mist dispersion.

• Ensure the unit is set up in humidifier mode as described in Section 4.2.
• Place the humidifier in the desired room, ensuring mist is not directed at walls or furniture.
• The humidifier will run for approximately 8 hours on a full 0.5-gallon tank.
• For optional aromatherapy, place a HALLS Vapor Pad into the medicine cup on top of the mist output cover.

5.3 Using as a Steam Inhaler

Сүрөт 5: Жакын план view of the transparent steam inhaler mask, showing its design for comfortable facial fit.

• Ensure the unit is set up in steam inhaler mode as described in Section 4.3.
• Once steam begins to generate, place your face comfortably over the inhaler mask.
• Breathe normally, inhaling the warm steam.
• Recommended usage time is 5-15 minutes per session. Do not exceed 30 minutes.
• Always maintain a safe distance from the steam output to avoid burns.

6. Техникалык тейлөө

Regular cleaning is essential for optimal performance and hygiene. Clean the unit based on frequency of use, ideally every 1-2 days.

6.1 Күнүмдүк тейлөө

• Агрегатты розеткадан сууруп, аны толугу менен муздатып алыңыз.
• Резервуардан жана базадан калган сууну бошотуңуз.
• Бак менен базаны таза суу менен чайкаңыз.
• Кайра чогултуудан же сактоодон мурун, бардык бөлүктөрүн кургатыңыз.

6.2 Weekly Cleaning (or as needed for mineral buildup)

1. Агрегатты розеткадан сууруп, муздаганга чейин күтүңүз.
2. Remove the water tank and mist output cover/inhaler mask.
3. To clean the heating element and base: Fill the base with 2 cups of white vinegar. Let it soak for 20-30 minutes to loosen mineral deposits.
4. Use a soft brush or cloth to gently scrub away any mineral buildup. Do not use abrasive cleaners.
5. Empty the vinegar solution and rinse the base thoroughly with clean water until the vinegar smell is gone.
6. To clean the water tank and attachments: Fill the tank with 1 teaspoon of white vinegar and 1 cup of water. Swish the solution around and let it soak for 20 minutes. Rinse thoroughly.
7. Rinse the mist output cover and inhaler mask with warm water.
8. Кайра монтаждоодон мурун бардык бөлүктөр толугу менен кургаганга мүмкүнчүлүк бериңиз.

Optional Demineralization Filter: If you have excessively hard water, an optional demineralization filter can be purchased and screwed directly into the tank cap to reduce mineral dust.

7. Кыйынчылыктарды

If you experience issues with your unit, please consult the following common problems and solutions:

Бул чечимдерди колдонуп көргөндөн кийин көйгөй чечилбесе, кардарларды колдоо менен байланышыңыз.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information or technical support, please refer to the product packaging or contact Crane customer service directly. Keep your purchase receipt as proof of purchase.

Байланыш маалыматы: Please visit the official Crane webсайтына кириңиз же эң акыркы колдоо маалыматын алуу үчүн өнүмүңүз менен кошо берилген байланыш маалыматтарын караңыз.