Introduction
The Klein Tools VDV500-163 Digital Tone Generator is designed for wire identification, wire tracing, and wire pair identification across various cable types. This device assists professionals in verifying cable integrity and locating specific wires within complex installations. It is compatible with Ethernet, telephone, speaker, coax, and data cables, including RJ45, RJ11, and RJ12 connections. For advanced tracing and wire mapping on active networks, this unit can be paired with the Klein Tools Digital Tracing Probe (Cat. No. VDV500-223), sold separately.
Жайгашуу
Батарея орнотуу
The VDV500-163 requires 4 x 1.5V LR03 AAA size alkaline batteries for operation. Batteries are included with the device. To install or replace batteries:
- Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
- Use a Phillips head screwdriver to loosen the screw securing the cover.
- Remove the cover and insert the 4 AAA batteries, ensuring correct polarity (+/-).
- Капкакты ордуна коюп, бураманы бекемдеңиз.
Сүрөт: Арткы view of the Klein Tools VDV500-163, highlighting the battery compartment and its securing screw.
Тесттин жыйынтыгын туташтыруу
The tone generator comes with angled bed-of-nails (ABN) clips for connecting to unstripped wires. These clips are color-coded (red and black) and connect to the corresponding ports on the top of the unit.
Image: The Klein Tools VDV500-163 Digital Tone Generator shown with its red and black test leads, terminating in alligator clips, connected to the device.
Иштөө нускамалары
Күйгүзүү/өчүрүү
басып, кармап туруңуз Күч түзмөктү күйгүзүү же өчүрүү үчүн алдыңкы панелде жайгашкан баскычты басыңыз.
Сыноо режимдери
The VDV500-163 features multiple test modes, selectable via the РЕЖИМ баскычы.
Continuity and Polarity Testing
In Test Mode, the device can check for continuity and polarity. Results are displayed on clearly labeled LEDs:
- Pass/Short LEDs: Indicate continuity status.
- NRM/REV LEDs: Indicate polarity (Normal/Reverse).
Image: A close-up of the Klein Tools VDV500-163's display panel, showing the LED indicators for 'Pass', 'Short', 'NRM' (Normal), and 'REV' (Reverse) in Test Mode.
Tone Generation
The Digital Tone Generator provides three unique tones to assist in tracing wires. Use the tone selection button to cycle through 1000Hz and 1500Hz options.
Image: A hand holding the Klein Tools VDV500-163, with the device's screen indicating it is in Tone Mode, ready for wire tracing.
RJ45 Port Usage
The integrated RJ45 port allows for easy testing of RJ45, RJ11, and RJ12 data cables. Simply plug the cable into the port to perform tests.
Image: The Klein Tools VDV500-163 connected to an RJ45 wall jack via its integrated port, demonstrating its use for testing data cables.
Image: The Klein Tools VDV500-163 with an RJ45 cable plugged directly into its port, ready for testing.
Tracing Unstripped Wires with ABN Clips
The rugged Angled Bed of Nails (ABN) clips securely attach to unstripped wires, allowing for tracing and identification without damaging insulation.
Image: The Klein Tools VDV500-163 shown with its attached angled bed-of-nails (ABN) clips, designed for secure connection to wires.
Сүрөт: жакын план view of the angled bed-of-nails clips securely attached to several blue network cables, demonstrating their application.
Сүрөт: деталдуу view of the angled bed-of-nails clips making contact with a single wire, illustrating the mechanism for piercing insulation.
Digital Mode (Requires VDV500-223 Digital Tracing Probe)
When used in conjunction with the Klein Tools Digital Tracing Probe (Cat. No. VDV500-223, sold separately), the VDV500-163 can trace and locate cables on an active network. This setup allows for identification of cable paths and destinations, as well as wire mapping to check Pin-to-Pin connections and shield detection.
Техникалык тейлөө
Тазалоо
To clean the device, wipe it with a dry, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from any cables before cleaning.
Батареяны алмаштыруу
Replace batteries when the low battery indicator appears on the display or when the device performance degrades. Refer to the 'Battery Installation' section for detailed instructions.
Проблемаларды чечүү
- Түзмөк күйбөйт: Батарея орнотулганын текшерип, батарейкалардын жаңы экенин текшериңиз.
- No tone detected: Ensure the tone generator is in Tone Mode and connected correctly. Verify the receiving probe (if used) is functioning and set to the correct frequency.
- Inaccurate continuity/polarity readings: Ensure all connections are secure and clean. Test leads should be free of damage.
Техникалык шарттар
| Бренд | KLEIN ТУРАЛДАР |
| Модель номери | VDV500-163 |
| Power Source | Hand-powered (Battery) |
| Батарея түрү | 4 x 1.5V LR03 AAA Size Alkaline |
| Батареянын орточо иштөө мөөнөтү | 20 саат |
| Өлчөмдөрү (L x W x Y) | 4.67 x 2.23 x 1.1 дюйм (11.86 x 5.66 x 2.79 см) |
| Элемент Салмагы | 5.3 унция (150 грамм) |
| Камтылган компоненттер | Digital Tone Generator |
Кепилдик маалымат
Klein Tools products are manufactured to high standards of quality and durability. For specific warranty details regarding your VDV500-163 Digital Tone Generator, please refer to the warranty statement included with your purchase or visit the official Klein Tools webсайт.
Колдоо
Кошумча жардам, техникалык колдоо же үчүн view additional product resources, please visit the official Klein Tools webсайтында www.kleintools.com. You may also contact Klein Tools customer service for direct support.
