IRRADIO Simplified Universal Remote Control with Learning Function

1. Киришүү

This manual provides detailed instructions for the setup, operation, and maintenance of your IRRADIO Simplified Universal Remote Control. This remote is designed for ease of use, featuring a learning function to replicate commands from your original remote control. Its simplified layout and large buttons make it suitable for users of all ages.

2. Продукт бүтүп калдыview

The IRRADIO Simplified Universal Remote Control is an infrared remote with a minimalist design. It features essential buttons for common functions, making it straightforward to operate.

Сүрөт 2.1: Фронт view of the IRRADIO Simplified Universal Remote Control. It features large, clearly labeled buttons for power, volume, channel, and two programmable auxiliary buttons (A and B).

Баскыч функциялары:

• Кубат баскычы (Кызыл): Аппаратты күйгүзөт же өчүрөт.
• AV Button (Mute): Toggles audio mute or switches AV input (programmable).
• V+ / V-: Increases or decreases volume.
• P+ / P-: Каналдарды өйдө же ылдый өзгөртөт.
• A / B Buttons: Two additional programmable buttons for frequently used functions.
• Indicator LED (Red dots): Lights up during button press and programming.

3. Орнотуу: Батареяны орнотуу

The remote control requires 2x AAA/LR03 1.5V batteries (not included).

1. Пульттун артындагы батарея отсегин табыңыз.
2. Батарея бөлүмүнүн капкагын жылдырып ачыңыз.
3. Insert two AAA/LR03 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Батарея уясынын капкагын бекем жабыңыз.

Эскертүү: The remote retains programmed memory even after battery replacement.

4. Operating Instructions: Programming the Remote Control

This universal remote uses a learning function to copy signals from your original remote control. You will need a functional original remote for programming.

Программалоо кадамдары:

1. Даярдоо: Place the IRRADIO universal remote and your original remote control on a flat surface, facing each other, with their infrared emitters aligned at a distance of approximately 1-3 cm.
2. Окуу режимине кириңиз: басып, кармап туруңуз Күч баскычы жана AV button simultaneously on the IRRADIO remote for about 3 seconds. The red indicator LED will light up continuously, indicating the remote is in learning mode.
3. Select Button to Program: Press the button on the IRRADIO remote that you wish to program (e.g., V+, P+, A, B). The red indicator LED will start blinking slowly, waiting for a signal.
4. Сигнал берүү: Press and hold the corresponding button on your original remote control (e.g., Volume Up, Channel Up). Keep holding it until the IRRADIO remote's LED blinks rapidly three times and then lights up continuously again. This indicates successful learning.
5. Program More Buttons: Repeat steps 3 and 4 for each button you wish to program.
6. Окуу режиминен чыгуу: Once all desired buttons are programmed, press the Күч button on the IRRADIO remote to exit learning mode. The red indicator LED will turn off.

Маанилүү эскертүүлөр:

• If the LED does not blink rapidly or turns off during programming, the learning process may have failed. Try again, ensuring proper alignment and battery levels in both remotes.
• Ensure the original remote has sufficient battery power for signal transmission.
• The remote can be reprogrammed infinitely.

5. Техникалык тейлөө

Батареяны алмаштыруу:

When the remote control's response becomes sluggish or the indicator LED does not light up, it is time to replace the batteries. Follow the battery installation steps in Section 3.

Тазалоо:

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the surface or internal components.

6. Кыйынчылыктарды

• Пульт жооп бербей жатат:
  • Батареялар туура полярдуулук менен туура салынганын текшериңиз.
  • Replace old batteries with new AAA/LR03 batteries.
  • Пульт менен аппараттын ортосунда эч кандай тоскоолдуктар жок экенин текшериңиз.
• Learning function fails:
  • Ensure the original remote control is working and has sufficient battery power.
  • Verify that the IRRADIO remote and the original remote are aligned correctly, facing each other at a close distance (1-3 cm).
  • Make sure you are pressing and holding the buttons for the required duration during programming.
  • Try programming in a room with less ambient light, as strong light sources can sometimes interfere with IR signals.
• Programmed button does not work:
  • The learning process might not have been successful for that specific button. Repeat the programming steps for that button.
  • Ensure the original remote's signal was strong and clear during programming.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Irradio webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.