HALO LCR208RD9FSE020

HALO LCR 2-Inch Regressed Canless LED Downlight Instruction Manual

Model: LCR208RD9FSE020

1. Продукт бүтүп калдыview

The HALO LCR 2-inch Regressed Canless LED Downlight offers a sleek, recessed lighting solution without the need for traditional can housings. This versatile LED downlight is suitable for both indoor and covered outdoor spaces, featuring selectable color temperatures and dimmable functionality.

Негизги өзгөчөлүктөрү:

2. Маанилүү коопсуздук нускамалары

Орнотуудан мурун бардык көрсөтмөлөрдү кунт коюп окуп чыгыңыз. Бул көрсөтмөлөрдү аткарбоо электр тогуна урунууга, өрткө же башка коркунучтарга алып келиши мүмкүн.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

HALO LCR 2-inch Regressed Canless LED Downlight and remote driver/junction box
This image displays the HALO LCR 2-inch Regressed Canless LED Downlight unit alongside its remote driver and junction box, which are essential components for installation.

4. Орнотуу жана орнотуу

The HALO LCR downlight is designed for easy installation in drywall or suspended ceilings without the need for a recessed housing or J-box.

Tools Required (suggested):

Этап-этабы менен орнотуу:

  1. Электр кубатын өчүрүү: Ensure power to the installation area is disconnected at the circuit breaker.
  2. Cut ceiling hole: Use a 2.75-inch (7 cm) hole saw to cut a circular opening in the ceiling at the desired location.
  3. Wire the junction box: Open the remote driver/junction box. Connect the building's electrical supply wires (hot, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Secure the junction box to a ceiling joist or other structural element if required by local codes, or simply place it through the ceiling hole.
  4. Түс температурасын тандоо (CCT): Before inserting the light fixture, locate the CCT selection switch on the remote driver/junction box. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, 5000K, or 6500K).
  5. Connect fixture to driver: Plug the connector from the downlight fixture into the corresponding receptacle on the remote driver/junction box.
  6. Арматураны киргизүү: Gently push the spring clips on the sides of the downlight fixture upwards and insert the fixture into the ceiling hole. The spring clips will secure the fixture in place.
  7. Күчтү калыбына келтирүү: Электрди өчүргүчтөн кайра күйгүзүңүз.
Four-step diagram showing installation of HALO LCR downlight: cutting hole, wiring junction box, inserting fixture, and flush mounting.
This diagram illustrates the simple four-step installation process: 1. Cutting a 2.75-inch hole in the ceiling. 2. Connecting electrical wires to the remote driver/junction box. 3. Pushing the spring clips to insert the downlight into the hole. 4. The downlight sitting flush with the ceiling surface.
Diagram showing dimensions of HALO LCR 2-inch downlight and remote driver.
This image provides detailed measurements for the HALO LCR 2-inch downlight and its remote driver, including the fixture's diameter (3.23 inches), depth (2.24 inches), and the driver's length (6.78 inches) and height (2.49 inches).
Бул видеодо толук маалымат берилетview of HALO lighting solutions, showcasing their use in various indoor and outdoor settings, and highlighting ease of installation and selectable color temperature features.

5. Иштөө нускамалары

Түс температурасын тандоо (CCT)

The HALO LCR downlight features a selectable color temperature switch located on the remote driver/junction box. This switch allows you to choose from six different color temperatures: 2700K (Soft White), 3000K, 3500K, 4000K, 5000K, and 6500K (Daylight). Make your selection before the final installation of the fixture into the ceiling.

Караңгылык

This downlight is compatible with most standard dimmers, supporting both 0-10V and phase-cut dimming systems. It can be dimmed smoothly down to 5% of its full brightness. Ensure your dimmer switch is compatible with LED lighting for optimal performance.

6. Кароо жана тейлөө

The HALO LCR LED Downlight is designed for long-term, maintenance-free operation with a rated lifespan of 50,000 hours, eliminating the need for bulb changes.

7. Көйгөйлөрдү чечүү боюнча колдонмо

If the downlight is not functioning correctly, refer to the following common issues and solutions:

КөйгөйМүмкүн себепЧечим
Жарык күйбөйтТүзмөккө кубат жокCheck circuit breaker and wall switch. Ensure all wiring connections in the junction box are secure.
Light flickers or dims erraticallyIncompatible dimmer switch or loose wiringEnsure your dimmer is compatible with LED lighting. Check wiring connections.
Туура эмес түс температурасыCCT которгучу туура эмес коюлганAccess the remote driver/junction box and adjust the CCT selection switch to the desired setting.
Жарык өтө күңүрт же өтө жарыкDimmer setting or CCT selectionAdjust the dimmer switch. Consider if a different CCT setting might appear brighter or dimmer to the eye.

If issues persist, contact HALO customer support.

8. Продукттун спецификациялары

ӨзгөчөлүкДеталь
МоделLCR208RD9FSE020
БрендHALO
Өлчөмү2 дюйм
Ватtage9.26 ватт
Жарыктык800 Lumens
Түс температурасы (CCT)6 Selectable (2700K, 3000K, 3500K, 4000K, 5000K, 6500K)
КүңүртөтүүYes, down to 5% (0-10V and Phase-Cut)
Тtage120 вольт
МатериалAluminum, Acrylic (Shade)
БүтүрүүЖылмакай ак
Продукциянын өлчөмдөрү3.51"L x 3.51"W x 2.24"H
Элемент Салмагы1.06 фунт
Ички/тышкы колдонууИмараттын ичинде, жабык сыртта
СертификаттарIC Rated, Wet Location Listed, ENERGY STAR
Өмүр50,000 саат
UPC080083259144
Diagram highlighting features of HALO LCR downlight including lumens, dimmability, CCT, CRI, junction box, and spring clips.
This diagram details key features: 835 nominal lumens, dimmable to 5%, 90 CRI for true color, 6 selectable CCTs (2700K-6500K), repositionable driver junction box, and spring clips for secure ceiling installation. It also shows the lens is regressed by 0.52 inches.

9. Кепилдик жана колдоо

The HALO LCR 2-inch Regressed Canless LED Downlight is backed by a 5 жылдык чектелген кепилдик. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.

Кардарларды колдоо

For technical assistance, warranty claims, or further information, please contact HALO customer service. HALO products are designed, tested, and supported in the USA.

Visit the official HALO store for more products and information: HALO Store

Тектеш документтер - LCR208RD9FSE020

Preview HALO RLDM сериясындагы LED ылдыйкы жарыкты орнотуу боюнча нускамалар (4 дюймдук жана 6 дюймдук)
HALO RLDM сериясындагы 4 дюймдук жана 6 дюймдук шамсыз LED лампаларын орнотуу боюнча кеңири колдонмо, алар күңүрттөө жана жылытуу режимдерин жана CCT/люменди тандоого мүмкүндүк берген опцияларды камтыйт. Коопсуздук боюнча көрсөтмөлөрдү, зымдарды жана орнотууну камтыйт.
Preview Halo HLBC-4" жана HLBC-6" серияларын орнотуу боюнча нускамалар
Halo HLBC-4 дюймдук жана HLBC-6 дюймдук сериясындагы LED лампаларын орнотуу боюнча кеңири колдонмо, анын ичинде таңгактоо, коопсуздук, зымдар, орнотуу, түс тандоо, караңгылатуу жана кепилдик.
Preview HALO RL 4 дюймдук капкагы жок светодиоддук жарыгы - Техникалык мүнөздөмөлөрү жана өзгөчөлүктөрү
Detailed specifications, order information, and features for the HALO RL 4" Recessed Baffle Canless LED Downlight, including selectable lumens, CCT, dimming capabilities, and compliance standards.
Preview HALO ML4 Direct Mount Series LED Downlight Installation Instructions
Comprehensive installation guide for the HALO ML4 Direct Mount Series LED Downlight, covering packaging contents, safety instructions, wiring, dimming, color selection, mounting options, and warranty information.
Preview HALO HLB сериясындагы LED жарыктандыруусун орнотуу боюнча нускамалар
HALO HLB-3", HLB-4" жана HLB-6" сериясындагы LED орнотулган жарык берүүчү шаймандарды орнотуу боюнча кеңири колдонмо, анын ичинде таңгактоо, коопсуздук, зымдар, орнотуу жана кепилдик жөнүндө маалымат.
Preview HALO RLFRC4 & RLFRC6 Series Fire-Rated LED Downlight Installation Instructions
Comprehensive installation guide for HALO RLFRC4 and RLFRC6 series fire-rated LED downlights, covering packaging contents, safety instructions, wiring, mounting, and dimming/color selection.