Veepeak L14-30R

Випик 30 Amp Flanged Outlet NEMA L14-30R Instruction Manual

Model: L14-30R

Introduction

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Veepeak 30 Amp Flanged Outlet NEMA L14-30R Locking Receptacle. Please read all instructions carefully before installation and use. Retain this manual for future reference.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

  • Бул түзмөктү орнотуудан же тейлөөдөн мурун ар дайым автоматтык өчүргүчтөн же сактандыргыч кутучасынан электр кубатын ажыратыңыз.
  • Ensure all wiring connections are secure and correct according to the wiring diagram and local codes.
  • Түзмөктүн көрсөтүлгөн электрдик кубаттуулук көрсөткүчтөрүнөн ашпаңыз.
  • This product is designed for use with NEMA L14-30P compatible plugs only.
  • Keep the weatherproof cap closed when the outlet is not in use to protect against moisture and dust.

Пакеттин мазмуну

  • 1 x Veepeak 30 Amp NEMA L14-30R Flanged Outlet
  • Орнотуу бурамалар

Техникалык шарттар

СпецификацияНарк
Ampөчүрүү30 Amps
Тtage125/250 Вольт AC
NEMA конфигурациясыL14-30R
Poles / Wires3 Pole, 4 Wire Grounding
Max Load7500 Ватт
Сунушталган зым өлчөгүч10 AWG/4C
МатериалПоливинилхлорид (PVC)
СертификаттарETL Listed (Conforms to UL & CSA standards)
Талап кылынган тешик өлчөмү2.5 дюйм

Орнотуу жана орнотуу

Керектүү куралдар: Screwdriver, wire strippers, drill (for mounting hole), appropriate drill bit.

  1. Монтаждоо ордун даярдоо: Choose a suitable, dry location for installation. Drill a 2.5-inch diameter hole for the receptacle body. Ensure there is enough space behind the mounting surface for wiring connections.
  2. Зымдарды туташтыруу:

    Refer to the wiring diagram below and the color-coded terminals on the back of the receptacle. Strip approximately 1/2 inch of insulation from each wire. Insert the wires into the corresponding terminals and tighten the screws securely. Ensure no bare wire strands are exposed outside the terminals.

    Артка view of the Veepeak L14-30R flanged outlet showing color-coded wiring terminals.

    Сүрөт: Арткы view of the L14-30R outlet, displaying the four color-coded terminals for wiring connections (Green for Ground, White for Neutral, Red and Black for Hot).

    NEMA L14-30R wiring diagram showing X, Y, W, G terminals for 125/250 Volt, 30 Amp байланыш.

    Image: NEMA L14-30R configuration diagram. 'X' and 'Y' are hot lines (125V each to neutral, 250V between them), 'W' is neutral, and 'G' is ground.

    • Green (G): Жер зымы.
    • Ак (W): Нейтралдуу зым.
    • Black (X): Hot wire (Line 1).
    • Red (Y): Hot wire (Line 2).
  3. Сактоочу жайды орнотуу: Insert the receptacle body into the drilled hole. Secure the flanged outlet to the mounting surface using the provided screws. Ensure it is flush and stable.
  4. Күчтү калыбына келтирүү: Орнотуу аяктагандан жана бардык туташуулар текшерилгенден кийин, автоматтык өчүргүчтөгү кубаттуулукту калыбына келтириңиз.
Фронт view of the Veepeak L14-30R flanged outlet with the weatherproof cap open, showing the locking receptacle.

Сүрөт: алдыңкы view of the Veepeak L14-30R flanged outlet with its weatherproof cap open, revealing the NEMA L14-30R locking receptacle.

Иштөө нускамалары

  1. Opening the Cap: Lift the weatherproof cap to access the receptacle.
  2. Шайманды туташтыруу: Align the NEMA L14-30P plug with the receptacle. Insert the plug and twist clockwise to lock it into place. Ensure the plug is fully seated and locked.
  3. Сайгычты ажыратуу: Twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.
  4. Closing the Cap: When the outlet is not in use, ensure the weatherproof cap is securely closed over the receptacle to protect it from environmental elements like rain, snow, and dust.
Фронт view of the Veepeak L14-30R flanged outlet with the weatherproof cap closed, protecting the receptacle.

Сүрөт: алдыңкы view of the Veepeak L14-30R flanged outlet with its weatherproof cap securely closed, providing protection.

Техникалык тейлөө

Үзгүлтүксүз тейлөө оптималдуу аткарууну жана коопсуздукту камсыз кылат.

  • Тазалоо: Periodically clean the exterior of the outlet with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the cap is closed during cleaning.
  • Текшерүү: Regularly inspect the outlet for any signs of damage, wear, or corrosion. Check the weatherproof cap for proper sealing.
  • Туташуу текшерүү: Annually, or if issues arise, disconnect power and check the wiring connections for tightness. Loose connections can cause overheating.

Проблемаларды чечүү

  • Кубат жок:
    • Чынжыр үчүн өчүргүчтү же сактагычты текшериңиз. Эгер чалынып калса, баштапкы абалга келтириңиз.
    • Кубат булагы активдүү экенин текшериңиз.
    • Сайгычтын толугу менен сайылып, розеткага бекитилгенин текшериңиз.
  • Бошоң байланыш:
    • If the plug feels loose or power is intermittent, disconnect power and inspect the wiring connections at the back of the receptacle for tightness.
    • Inspect the plug on the appliance for damage.
  • Damage to Outlet:
    • If the outlet housing or terminals show signs of damage, cracking, or burning, discontinue use immediately and replace the unit.

Эгерде мүчүлүштүктөрдү оңдоо кадамдары көйгөйдү чечпесе, квалификациялуу электрикке кайрылыңыз.

Кепилдик жана колдоо

Veepeak provides a one-year hassle-free replacement warranty for this product. For warranty claims or customer service inquiries, please contact Veepeak customer support through the retailer where the product was purchased or visit the official Veepeak webсайт.

Тектеш документтер - L14-30R

Preview Veepeak OBDCheck VP11 үчүн FAQs жана Fehlerbehebung
Veepeak OBDCheck VP11 (V2.2509). Finden Sie Antworten auf häufige Fragen zur Compatibilität, Verbindung и Nutzung mit verschiedenen Fahrzeugen жана Apps.
Preview OBDCheck BLE+ (PLUS) V3.2601: FAQ & Troubleshooting Guide
Comprehensive FAQ and troubleshooting guide for the Veepeak OBDCheck BLE+ (PLUS) V3.2601 OBD-II scanner. Covers vehicle compatibility, app usage, connection issues, and common problems for iOS and Android devices.
Preview OBDCheck BLE FAQ жана Көйгөйлөрдү чечүү боюнча колдонмо
Veepeak OBDCheck BLE OBD-II сканери үчүн комплекстүү FAQ жана көйгөйлөрдү аныктоо боюнча колдонмо. Колдонмонун шайкештиги, унааны колдоо, туташуу маселелери жана колдонуу жөнүндө жалпы суроолорго жооп табыңыз.
Preview Veepeak OBDCheck BLE колдонуучу нускамалары
Veepeak OBDCheck BLE Bluetooth OBD II сканери үчүн колдонуучунун нускамалары, транспорттун шайкештигин, колдонмо сунуштарын, орнотуу боюнча көрсөтмөлөрдү, КБС, көйгөйлөрдү чечүү, кепилдик жана жоопкерчиликтен баш тартууну камтыйт.
Preview Veepeak OBDCheck VP11 Колдонуучу нускамалары жана колдонмосу
Veepeak OBDCheck VP11 OBD-II скандоочу куралы үчүн колдонуучунун комплекстүү нускамалары, транспорттун шайкештигин, колдонмо сунуштарын, орнотууларды, КБС, көйгөйлөрдү чечүү жана кепилдик маалыматын камтыйт.
Preview VEEPEAK OBDCheck VP11 Колдонуучунун колдонмосу: Функциялар, Орнотуулар жана Көйгөйлөрдү чечүү боюнча колдонмо
VEEPEAK OBDCheck VP11 Bluetooth OBD2 диагностикалык сканери үчүн комплекстүү колдонуучу колдонмо. Анын өзгөчөлүктөрү, орнотуу нускамалары, туура келген унаалар жана колдонмолор, бузулууларды аныктоо боюнча кеңештер жана колдоо маалыматы жөнүндө билип алыңыз.