SeKi Network Cable Tester (Model 17437) - Instruction Manual

1. Киришүү

The SeKi Network Cable Tester (Model 17437) is a versatile and reliable tool designed for verifying the integrity of network and ISDN cable connections. It supports universal compatibility with RJ11, RJ12, and RJ45 network connections, making it an essential device for IT technicians, system administrators, and DIY enthusiasts. This tester is particularly suitable for LAN network cables including CAT5, CAT6, and CAT7 standards.

The device consists of two units: a Master unit and a Remote unit. Both units feature integrated LED indicators for 8 individual wires plus a ground (G) indicator, providing clear visual feedback during testing. These test LEDs allow you to monitor the cable's wiring and quickly detect potential errors such as open circuits, short circuits, miswires, and cross-overs.

2. Коопсуздук нускамалары

• Аппаратты иштетүүдөн мурун бардык нускамаларды окуп чыгыңыз.
• Аппаратты нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
• Use only a 9V battery of the specified type. Ensure correct polarity during installation.
• Эгерде түзмөк көпкө чейин колдонулбаса, агып кетүүнүн алдын алуу үчүн батарейканы чыгарып коюңуз.
• Аппаратты өзүңүз ачууга же оңдоого аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
• Аппаратты балдар жетпеген жерде сактаңыз.

3. Продукциянын компоненттери

The SeKi Network Cable Tester comprises two main parts:

• Негизги блок: The larger unit with the power switch and multiple ports.
• Алыскы бирдиги: The smaller, detachable unit used for testing the far end of a cable.

Image 1: The SeKi Network Cable Tester, showing both the Master and Remote units.

Master Unit Features:

• RJ11/RJ12/RJ45 Ports: For connecting various cable types.
• OFF/ON/S Switch: Power switch with two testing speeds (ON for normal, S for slow).
• LED Indicators (1-8, G): Display the status of each wire and ground connection.

Remote Unit Features:

• RJ11/RJ12/RJ45 Port: For connecting the remote end of the cable.
• LED Indicators (1-8, G): Mirror the Master unit's indicators for continuity.

Image 2: The Master and Remote units of the SeKi Network Cable Tester, shown separated.

4. Орнотуу

4.1 Батареяны орнотуу

1. Locate the battery compartment on the back of the Master unit.
2. Батареянын капкагын ачыңыз.
3. Insert a 9V battery (not included), ensuring correct polarity (+/-).
4. Батареянын капкагын бекем жабыңыз.

4.2 Сыноо үчүн кабелдерди туташтыруу

Before testing, ensure the cable is disconnected from all active network devices.

1. For testing a patch cable (short cable): Connect one end of the cable to the appropriate port (RJ11, RJ12, or RJ45) on the Master unit and the other end to the corresponding port on the Remote unit.
2. For testing an installed cable (e.g., wall jack to patch panel): Connect one end of the cable (or wall jack) to the Master unit and the other end (e.g., patch panel port) to the Remote unit.

Сүрөт 3: Жакын пландан view of the SeKi Network Cable Tester's RJ11, RJ12, and RJ45 ports.

5. Иштөө нускамалары

5.1 Powering On and Test Modes

Once the cable is connected, slide the OFF/ON/S switch on the Master unit to your desired test mode:

• КҮЙҮК: This is the normal test speed. The LEDs will light up sequentially from 1 to 8, then G (Ground), indicating the continuity of each wire.
• S (Жай): This mode provides a slower test speed, allowing for more detailed observation of the LED sequence, which can be helpful for identifying subtle issues.

5.2 LED индикаторлорун чечмелөө

Observe the LED indicators on both the Master and Remote units. The LEDs on the Remote unit should mirror the sequence of the Master unit's LEDs.

• Correct Wiring (Pass): The LEDs on both units will light up in a sequential order (1-2-3-4-5-6-7-8-G). This indicates that all wires have proper continuity and are correctly mapped.
• Open Circuit / Broken Wire: If an LED on either unit fails to light up in the sequence, it indicates an open circuit or a broken wire for that specific pin.
• Кыска туташуу: If two or more LEDs light up simultaneously or out of sequence, it indicates a short circuit between those wires.
• Miswire / Cross-over: If the sequence of LEDs on the Remote unit does not match the Master unit (e.g., Master shows 1-2-3, Remote shows 1-3-2), it indicates a miswire or cross-over.
• Ground (G) Indicator: The 'G' LED indicates the continuity of the ground wire.

Image 4: The SeKi Network Cable Tester in operation, connected to a blue network cable.

5.3 Testing Different Cable Types

• RJ45 Cables (8P8C): Used for LAN connections (Ethernet). The tester will check all 8 pins and the ground.
• RJ12 Cables (6P6C): Often used for telephone systems. The tester will check pins 1-6 and ground.
• RJ11 Cables (6P4C): Commonly used for telephone lines. The tester will check pins 1-4 and ground.

Always ensure you connect the cable to the correct port on both the Master and Remote units.

6. Техникалык тейлөө

• Тазалоо: Түзмөктү жумшак, кургак чүпүрөк менен сүртүңүз. Суюк тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Сактагыч: Сыноочуну күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Батарея: If the device will not be used for an extended period, remove the 9V battery to prevent potential leakage and damage to the unit.

7. Кыйынчылыктарды

• Эч кандай светодиоддор күйбөйт:
  • Check if the 9V battery is correctly installed and has sufficient charge. Replace if necessary.
  • Ensure the power switch is in the 'ON' or 'S' position.
• Incorrect LED sequence or missing lights:
  • Verify that the cable connectors are properly crimped and seated firmly in the tester's ports.
  • Inspect the cable for visible damage (cuts, kinks).
  • If testing an installed cable, check the wall jacks or patch panel connections.
• Intermittent test results:
  • Ensure stable connections between the cable and the tester units.
  • Check the battery charge. Low battery can cause inconsistent readings.

8. Техникалык шарттар

9. Кепилдик жана колдоо

This product is designed for durability and reliability. Spare parts availability is typically 2 years from the date of purchase.

For technical support, warranty claims, or further assistance, please contact your retailer or the point of purchase. Ensure you have your proof of purchase and the product model number (17437) available when contacting support.