LEHMANN LGALM-2642

LEHMANN LGALM-2642 өзү жүрүүчү жылуулук менен иштеген газон чапкыч колдонуучунун колдонмосу

Model: LGALM-2642

1. Коопсуздук маалыматы

Read and understand all safety warnings and instructions before operating this lawn mower. Failure to follow these instructions may result in serious injury.

  • Always wear appropriate personal protective equipment (PPE), including safety glasses, sturdy footwear, and hearing protection.
  • Keep hands and feet away from rotating parts. The blade continues to rotate for a short period after the engine is switched off.
  • Чөп чапкычты нымдуу чөптө же жамгырда иштетпеңиз.
  • Clear the area of objects such as rocks, toys, and wires before mowing.
  • Never allow children or untrained individuals to operate the lawn mower.
  • Кыймылдаткычты өчүрүп, муздатуу менен жакшы желдетилген жерде май куюңуз. Май куюп жатканда тамеки тартпаңыз.
  • Always disconnect the spark plug wire before performing any maintenance or cleaning.

2. Орнотуу жана чогултуу

Чөп чапкычты биринчи жолу колдонууга даярдоо үчүн төмөнкү кадамдарды аткарыңыз.

2.1 Пакеттен чыгаруу

Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз. Бардык бөлүктөр таңгак тизмесине ылайык бар экенин текшериңиз.

2.2 Иштетүү тутуму

  1. Unfold the handle and secure it in the operating position using the provided knobs or levers.
  2. Бардык кабелдер туура жайгаштырылганын жана кысылып калбаганын текшериңиз.

2.3 Мотор майын кошуу

The engine is shipped without oil. It is crucial to add the correct type and amount of oil before starting.

  • Чөп чапкычты тегиз жерге кой.
  • Май толтуруучу капкактын/ченегичти табыңыз.
  • Carefully pour the recommended engine oil (e.g., SAE 30 or 10W-30, approximately 0.5 liters) into the oil fill opening until it reaches the 'FULL' mark on the dipstick. Do not overfill.
Hand pouring oil into the lawn mower engine.
Сүрөт 2.3.1: A hand carefully pouring engine oil into the oil fill opening of the lawn mower. This step is essential before the first use to ensure proper engine lubrication.

2.4 Күйүүчү май кошуу

Октан саны 87 же андан жогору болгон жаңы, коргошунсуз бензинди колдонуңуз. E85 күйүүчү майды колдонбоңуз.

  • Мотор өчүрүлгөн жана муздатылганын текшериңиз.
  • Күйүүчү май багынын капкагын ачыңыз.
  • Fill the fuel tank, leaving a small space for expansion.
  • Күйүүчү май багынын капкагын бекем жабыңыз.

2.5 Grass Collection Bag Attachment

Assemble the grass collection bag if necessary and attach it to the rear discharge opening of the mower.

LEHMANN LGALM-2642 Self-Propelled Thermal Lawn Mower with oil and spare blades.
Сүрөт 2.5.1: An overview of the LEHMANN LGALM-2642 lawn mower, including the grass collection bag, engine, and handle. Also shown are a bottle of engine oil and two cutting blades, one red and one black.

3. Иштөө нускамалары

Familiarize yourself with the controls and operating procedures before starting the engine.

3.1 Моторду ишке киргизүү

  1. Ensure the fuel tank is filled and engine oil is at the correct level.
  2. Press the primer bulb (if equipped) 3-5 times until fuel is visible.
  3. Move the throttle lever to the 'START' or 'CHOKE' position.
  4. Firmly grasp the starter handle and pull the starter cord with a smooth, continuous motion until the engine starts.
  5. Once the engine starts, gradually move the throttle lever to the 'RUN' position.
Hand pulling the starter cord of the lawn mower.
Сүрөт 3.1.1: A hand pulling the starter cord to initiate the engine of the lawn mower.

3.2 Кесүү бийиктигин тууралоо

The cutting height can be adjusted to 5 levels, ranging from 25 mm to 70 mm.

  • Ensure the engine is off and the blade has stopped rotating.
  • Locate the height adjustment levers, typically near the wheels.
  • Move the levers to the desired cutting height setting. Ensure all wheels are set to the same height.
Close-up of the lawn mower's cutting height adjustment mechanism, showing settings from 2.5 cm to 7 cm.
Сүрөт 3.2.1: А деталдуу view of the lawn mower's cutting height adjustment, illustrating the five available settings from 2.5 cm (25 mm) to 7 cm (70 mm).
Hand adjusting the cutting height lever on the lawn mower.
Сүрөт 3.2.2: A hand manipulating the red lever on the side of the lawn mower to adjust the cutting height.

3.3 Өз алдынча жүрүүнү тартуу

This model features self-propulsion for easier operation.

  • With the engine running, engage the self-propel lever (usually located on the handle).
  • The mower will begin to move forward. Release the lever to disengage self-propulsion.
Person operating the LEHMANN LGALM-2642 self-propelled lawn mower on a green lawn.
Сүрөт 3.3.1: A person demonstrating the use of the LEHMANN LGALM-2642 self-propelled lawn mower, pushing it across a well-maintained lawn.

3.4 Чөп салынган баштыкты бошотуу

Regularly check and empty the grass collection bag to maintain optimal cutting performance.

  • Stop the engine and wait for the blade to stop completely.
  • Lift the rear discharge flap and carefully remove the grass bag.
  • Empty the grass clippings into a suitable container.
  • Reattach the grass bag securely.
Hand removing the grass collection bag from the lawn mower.
Сүрөт 3.4.1: A hand detaching the grass collection bag from the rear of the lawn mower, ready for emptying.

3.5 Моторду токтотуу

To stop the engine, release the engine brake lever (usually located on the handle). The engine will shut off automatically.

4. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин чөп чапкычыңыздын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.

4.1 Тазалоо

  • After each use, clean the underside of the mower deck to prevent grass buildup.
  • This model features a water hose connection for easy deck cleaning. Attach a garden hose to the nozzle, start the engine, and engage the blade for a few minutes to clean the deck.
  • Жарнама менен сыртын тазалаamp cloth. Do not use high-pressure washers directly on the engine or electrical components.
Close-up of the water hose connection point on the lawn mower deck and the blade being cleaned by water.
Сүрөт 4.1.1: А деталдуу view showing the water hose connection on the mower deck, designed for easy cleaning of the blade and underside with water.

4.2 Бычакка кам көрүү

  • Regularly inspect the blade for sharpness and damage. A dull blade tears grass, leading to an unhealthy lawn.
  • If the blade is dull, have it sharpened or replaced by a qualified service technician.
  • Always disconnect the spark plug wire before inspecting or working on the blade.
Close-up of the red cutting blade inside the mower deck.
Сүрөт 4.2.1: Жакын план view of the red cutting blade within the mower deck, highlighting its design for efficient grass cutting.

4.3 Мотордун майын алмаштыруу

Кыймылдаткычтын майын алгачкы 5 саат иштегенден кийин, андан кийин ар бир 25 саат сайын же жылына бир жолу, кайсынысы биринчи келсе, ошого жараша алмаштырып туруңуз.

  • Майды жылытуу үчүн кыймылдаткычты бир нече мүнөт иштетиңиз.
  • Кыймылдаткычты токтотуп, шамдын зымды ажыратыңыз.
  • Place a suitable container under the oil drain plug (or tilt the mower to drain from the fill tube).
  • Remove the drain plug (or fill cap) and allow the oil to drain completely.
  • Дренаждык тыгынды ордуна коюп, сунушталган өлчөмдөгү жана түрдөгү жаңы кыймылдаткыч майы менен толтуруңуз.

4.4 Air Filter Inspection and Cleaning

Аба чыпкасын үзгүлтүксүз текшерип туруңуз жана кыймылдаткычтын туура иштешин камсыз кылуу үчүн зарылчылыкка жараша тазалаңыз же алмаштырыңыз.

Close-up of the lawn mower engine, showing the air filter cover.
Сүрөт 4.4.1: Жакын план view of the lawn mower's engine, with a focus on the air filter housing, which requires regular inspection and cleaning.

4.5 Учкунды текшерүү

Inspect the spark plug annually or every 50 hours. Clean or replace if necessary.

Hand connecting the spark plug cap to the engine.
Сүрөт 4.5.1: A hand carefully connecting the spark plug cap to the engine, a routine maintenance task.

4.6 Сактоо

For long-term storage, ensure the fuel tank is empty or treated with a fuel stabilizer. Clean the mower thoroughly and store it in a dry, protected area. The foldable handle allows for space-saving storage.

5. Кыйынчылыктарды

Бул бөлүмдө чөп чапкыч менен кездешүүчү кеңири таралган көйгөйлөр каралат.

КөйгөйМүмкүн себепЧечим
Мотор иштебейт
  • Күйүүчү май же эскирген күйүүчү май жок
  • Кыймылдаткыч майынын деңгээли өтө төмөн
  • Шамдын зымы ажыратылды
  • Бүктелген аба чыпкасы
  • Бузулган шам
  • Fill with fresh fuel
  • Текшерип, май кошуу
  • Шамдын зымын туташтырыңыз
  • Аба чыпкасын тазалаңыз/алмаштырыңыз
  • Шамды текшериңиз/алмаштырыңыз
Чөп чапкыч бирдей эмес кесилет
  • Күңүрт же бузулган бычак
  • Uneven cutting height adjustment
  • Excessive grass buildup under deck
  • Бычакты курчутуңуз же алмаштырыңыз
  • Ensure all wheels are set to the same height
  • Clean mower deck
Ашыкча термелүү
  • Ийилген же тең салмаксыз бычак
  • Loose engine mounting bolts
  • Inspect and replace blade if bent; balance if dull
  • Бардык болтторду тартыңыз
Self-propulsion not engaging
  • Айдоо куру бош же бузулган
  • Control cable adjustment
  • Inspect and replace drive belt
  • Adjust or replace control cable

6. Техникалык шарттар

Key technical details for the LEHMANN LGALM-2642 Lawn Mower.

Diagram showing the dimensions of the LEHMANN LGALM-2642 lawn mower.
Сүрөт 6.1.1: A diagram illustrating the key dimensions of the LEHMANN LGALM-2642 lawn mower, including length (139 cm), width (48 cm), and height (103 cm).
ӨзгөчөлүкДеталь
Модель номериLGALM-2642
Мотор түрү146 cm³ OHV Internal Combustion Engine
Мотор күчү3.49 л.с. (2.6 кВт)
Кесүү туурасы42 см
Кесүү бийиктигин тууралоо5 levels (25 mm - 70 mm)
Чөп баштык сыйымдуулугу40 литр
Сунушталган газон аянты2000 м² чейин
Иштөө режимиSelf-Propelled (Automatic)
МатериалЭритме болот
Элемент Салмагы29 кг
Продукциянын өлчөмдөрү (L x W x Y)Approx. 139 cm x 48 cm x 103 cm (assembled)

7. Кепилдик жана колдоо

LEHMANN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or contact LEHMANN customer service.

7.1 Кардарларды колдоо

If you have any questions, require technical assistance, or need to order replacement parts, please contact LEHMANN customer support through the retailer where you purchased the product or visit the official LEHMANN webбайланыш маалыматы үчүн сайт.

When contacting support, please have your model number (LGALM-2642) and purchase date available.

Тектеш документтер - LGALM-2642

Preview Lehmann микропрограммалык камсыздоосун жаңыртуучу: Кулпулар жана RFID окугучтары үчүн колдонуу боюнча нускамалар
Бул документ LEHMANN Firmware Updater программасынын иштөө боюнча нускамаларын камтыйт, анда Lehmann кулпуларындагы, RFID окугучтарындагы жана терминалдарындагы микропрограмманы кантип жаңыртуу керектиги кеңири баяндалган. Системалык талаптарды, шайкеш келген продуктыларды жана этап-этабы менен көрсөтмөлөрдү камтыйт.
Preview LEHMANN башкаруу программасынын колдонуучу үчүн колдонмосу: конфигурация жана иштетүү
LEHMANN башкаруу программасы (LMS) боюнча кеңири колдонуучу колдонмосунда LEHMANN RFID системаларын оффлайн жана онлайн режимдеринде конфигурациялоо, иштетүү жана башкаруу кеңири баяндалган. Транспондерлерди жана кулпуларды башкарууну, колдонуучунун жөндөөлөрүн жана системаны башкарууну камтыйт.
Preview LEHMANN CNC айланма үстөлдөрү - Негизги каталогдун 4-чыгарылышы | PGD, E, DD сериялары
LEHMANN компаниясынын CNC айланма үстөлдөрү үчүн негизги каталогунун 4-чыгарылышы. PGD, E-сериялары, DD сериялары жана башкаларды изилдеңиз. Өнөр жайлык автоматташтыруу жана так өндүрүш үчүн жогорку ылдамдыктагы, терс таасирсиз чечимдер.
Preview LEHMANN M610 LEGIC L043-A03 Электрондук шкаф кулпусун колдонуу боюнча нускамалар
LEHMANN M610 LEGIC L043-A03 электрондук кулпусунун орнотуу, программалоо, иштетүү, техникалык тейлөө жана мүчүлүштүктөрдү оңдоо боюнча кеңири нускамалар.
Preview LEHMANN RFID Картенпрограммасы: Anleitung und Übersicht
Erfahren Sie, Wie Sie LEHMANN RFID-Schließsysteme mit verschiedenen Karten Wie Installations-, Master- и User-Karten программалык камсыздоо. Diese Anleitung erklärt die Betriebsmodi, Funktionen жана ден Reset-Prozess.
Preview LEHMANN VERTO DIAL LOCK ЖЕКЕ УКУК (FIX-CODE) - Колдонуу боюнча нускамалар жана колдонуучунун колдонмосу
LEHMANN VERTO DIAL LOCK ЖЕКЕ УКУГУ (FIX-CODE) үчүн кеңири колдонуу боюнча нускамалар жана колдонуучу колдонмосу. Колдонуучу кодун кантип орнотууну, өзгөртүүнү жана баштапкы абалга келтирүүнү, ошондой эле шашылыш түрдө эшикти кантип ачууну үйрөнүңүз.