Introduction
This manual provides instructions for the Schwinn Quick Wrap Bike Light Set, designed to enhance visibility and safety during cycling. The set includes one headlight and one taillight, both featuring LED technology for bright illumination. Please read these instructions thoroughly before use.
Image: The Schwinn Quick Wrap Bike Light Set, featuring a white headlight and a red taillight.
Пакеттин мазмуну
- 1 x Schwinn Quick Wrap LED Headlight
- 1 x Schwinn Quick Wrap LED Taillight
Note: 3 AAA batteries are required for each light and are not included.
Жайгашуу
1. Батареяны орнотуу
- Locate the battery compartment on the rear of each light unit.
- Отсектин капкагын кылдаттык менен ачыңыз.
- Insert 3 AAA batteries into each light, ensuring correct polarity (+/-).
- Батарея бөлүгүнүн капкагын бекем жабыңыз.
2. Монтаждоо боюнча нускамалар
The Quick Wrap bike lights feature a tool-free strap design for easy attachment.
- For the Headlight: Wrap the integrated strap around your bicycle's handlebar. Ensure the light faces forward and is positioned securely.
- For the Taillight: Wrap the integrated strap around your bicycle's seat post. Ensure the light faces backward and is positioned securely.
Image: The headlight attached to a bicycle handlebar, facing forward.
Image: The taillight attached to a bicycle seatpost, facing backward.
Иштөө нускамалары
Each light unit has a single power button to control its functions.
- Күйгүзүү/өчүрүү: Press the power button once to turn the light on. Press and hold the button for approximately 2 seconds to turn the light off.
- Режимдерди өзгөртүү: With the light on, press the power button repeatedly to cycle through the available lighting modes:
- Туруктуу режим: Provides continuous illumination.
- Жаркыроо режими: Provides intermittent flashing for increased visibility.
Image: The Schwinn Quick Wrap Bike Lights demonstrating the two available modes: steady and flash.
Техникалык тейлөө
Батареяны алмаштыруу
When the light output diminishes or the light fails to turn on, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
Тазалоо
The lights are waterproof (IPX4 rated). To clean, wipe the exterior with a damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
Проблемаларды чечүү
- Жарык күйбөйт:
- Ensure batteries are installed correctly with the proper polarity.
- Эски батареяларды жаңы AAA батареялары менен алмаштырыңыз.
- Жарык күңүрт:
- Батареяларды жаңы AAA батарейкалары менен алмаштырыңыз.
Продукт спецификациялары
Image: A table detailing the specifications for the headlight and taillight.
| Өзгөчөлүк | Фара | Арткы жарык |
|---|---|---|
| Жарыктык | 40 Lumens | 10 Lumens |
| Beam Distance | 32 фут | 20 фут |
| Power Source | 3 AAA Batteries (each light) | |
| Steady Mode Run Time | 20 саатка чейин | 18.5 саатка чейин |
| Flash Mode Run Time | 107 саатка чейин | 127 саатка чейин |
| Материал | Пластик | |
| Суу каршылык | IPX4 (Суу өткөрбөйт) | |
| Монтаж түрү | Quick Wrap Strap (Handlebar/Seat Post) | |
| Орнотуулардын саны | 2 (Steady, Flash) | |
| Элемент Салмагы | 0.1 Kilograms (total for set) | |
| Модель аты | Schwinn LED Tool Free Bike Light | |
| UPC | 038675265035 | |
Кепилдик маалымат
This Schwinn product comes with a Limited Warranty. For specific details regarding warranty coverage and terms, please refer to the documentation included with your purchase or visit the official Schwinn webсайт.
Кардарларды колдоо
For further assistance, technical support, or inquiries regarding your Schwinn Quick Wrap Bike Light Set, please visit the official Schwinn webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Байланыш маалыматын адатта продукт таңгагынан же бренддин расмий онлайн катышуусунан тапса болот.
