Sony A7C II / A7CR үчүн SmallRig Cage топтому колдонуучунун колдонмосу

Introduction

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the SmallRig Cage Kit 4422 for Sony Alpha 7C II and Alpha 7CR cameras. This kit is designed to protect your camera and enhance its functionality for video recording and photography by providing multiple accessory mounting points and improved ergonomics.

Кутуда эмне бар

• капас x 1
• Clamp for HDMI Cable x 1
• Колдонуучунун колдонмосу x 1

1-сүрөт: SmallRig Cage Kit 4422 таңгагынын ичиндегиси.

Орнотуу жана орнотуу

1. Installing the Camera Cage

The SmallRig Cage Kit 4422 is designed for a precise fit with the Sony Alpha 7C II and Alpha 7CR cameras. Follow these steps for proper installation:

1. Камераны даярдоо: Before installing the cage, ensure the camera is powered off. It is recommended to remove the strap ring located on the camera's right side to ensure a secure and flush fit of the cage.
2. Капасты бекитүү: Align the camera with the cage. The cage locks the camera via two main points:
   • Secure the camera to the cage using the 1/4"-20 screw located on the bottom of the cage. Tighten this screw firmly.
   • Further secure the camera with the M2.5 screw on the side of the cage. This dual-point locking mechanism prevents twisting and ensures stability.

Figure 2: SmallRig Cage 4422 mounted on a Sony A7C II camera, providing protection and additional mounting points.

3-сүрөт: Детальдуу view of the cage's anti-twist locking mechanism, utilizing both bottom and side screws for stability.

2. Attaching the HDMI Cable Clamp

The included HDMI cable clamp helps protect the camera's HDMI port and ensures stable signal transmission during use.

1. Insert your HDMI cable into the camera's HDMI port.
2. Кабелди жайгаштырыңыз clamp around the HDMI cable and align it with the designated mounting point on the cage.
3. Tighten the thumb screw on the cable clamp to secure it in place. This allows for quick assembly and disassembly.

Эскертүү:

• If you need to use the camera's headphone jack, you may need to remove the HDMI Cable Clamp алгачкы.

Figure 4: The HDMI cable clamp providing a stable and protected connection for the HDMI cable.

Operating the Cage Kit

1. Enhanced Handgrip Feeling

The cage features an integrated hinge arm design at the battery compartment, which not only seamlessly fits the camera's curve but also significantly improves the overall handgrip. This ergonomic design provides a more comfortable and secure hold, especially beneficial for extended shooting sessions.

Figure 5: The cage enhances the camera's handgrip for improved comfort and stability.

2. Бир нече орнотуу чекиттери

The SmallRig Cage 4422 offers a variety of mounting points for attaching accessories, expanding your camera's versatility:

• 1/4''-20 & 3/8''-16 Threaded Holes: Located throughout the cage, these standard mounting points are compatible with various accessories such as top handles (e.g., SmallRig 3765), side handles (e.g., SmallRig 4346), and magic arms.
• 3/8"-16 Locating Hole for ARRI: This specific hole is designed for ARRI-standard accessories, such as monitor mounts (e.g., SmallRig 2903B), providing anti-twist security.
• Муздак бут кийим үчүн бекиткичтер: Integrated cold shoe mounts allow for direct attachment of accessories like LED lights (e.g., SmallRig 4055) or microphones.
• НАТО темир жолу: A NATO rail is included for quick attachment and detachment of NATO-compatible accessories, such as top handles (e.g., SmallRig 4345).
• Bottom QD Socket: A Quick Detach (QD) socket is provided on the bottom for easily attaching shoulder straps.
• M4 Threaded Holes (Bottom Front): These holes are compatible with the Horizontal-to-Vertical Mount Plate 4424, enabling quick switching between horizontal and vertical shooting orientations.

Figure 6: ашыкview of the diverse mounting options available on the cage.

3. Quick Release Plate for Arca-Swiss

The cage features a built-in quick release plate compatible with Arca-type systems. This allows for rapid transitions between handheld shooting, tripod mounting, and stabilizer setups.

• Шайкештик: The Arca-type plate is compatible with tripods and gimbals that support the Arca-Swiss standard, including DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers and DJI RS 2 / RSC 2 gimbals quick-release plates (e.g., SmallRig Quick Release Plate for Arca-Type 3154).

Figure 7: Seamless transitions between different shooting setups using the integrated Arca-Swiss plate.

8-сүрөт: Мисamples of multiple usage scenarios for the SmallRig Cage Kit, demonstrating its versatility.

Техникалык тейлөө

To ensure the longevity and optimal performance of your SmallRig Cage Kit, follow these maintenance guidelines:

• Тазалоо: Чаңды жана манжа издерин кетирүү үчүн капасты жумшак, кургак чүпүрөк менен сүртүңүз. Өжөр кирлер үчүн бир аз сүртүңүз.amp cloth and then dry thoroughly. Avoid abrasive cleaners or solvents that could damage the finish.
• Сактагыч: Store the cage in a dry, cool place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure it is clean and free of moisture.
• Текшерүү: Periodically check all screws and mounting points for tightness. Re-tighten if necessary to maintain stability and prevent accidental camera detachment.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

SmallRig products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official SmallRig webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Официалдуу Webсайт: www.smallrig.com