DieseRC Wi-Fi+RF Smart Roller Shutter Controller модулунун Колдонуучу колдонмосу

1. Киришүү

This manual provides detailed instructions for the installation, setup, and operation of the DieseRC Wi-Fi+RF Smart Roller Shutter Controller Module. This module is designed to integrate traditional roller shutters, awnings, or AC motors into a smart home system, allowing control via a mobile application, RF remote, or voice commands.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Кош башкаруу режимдери: Supports both Wi-Fi (via Tuya/Smart Life App) and RF 433MHz remote control.
• Үн жардамчысынын шайкештиги: Works with Amazon Alexa and Google Home for convenient voice control.
• Колдонмо функциялары: Offers percentage control, timing, scheduling, and family sharing.
• Оңой орнотуу: Compact design (45x45x16 mm) fits into most electrical boxes.
• Кеңири колдонуу: Suitable for roller shutters, electric curtains, awnings, garage doors, and other AC motors.

2. Коопсуздук маалыматы

WARNING: Risk of Electric Shock. Installation should only be performed by a qualified electrician or in accordance with local electrical codes.

• Ensure power is disconnected at the circuit breaker before installation, maintenance, or removal of the device.
• Do not exceed the maximum load rating of 10A (inductive load max 5A).
• Белгиленген көлөмдүн чегинде иштеңизtage range of AC 100V~240V.
• This module is designed for 4-wire AC motors (2 input phase wires, 1 neutral wire, and 1 ground wire).
• Түзмөктү суудан жана нымдуулугу жогору чөйрөлөрдөн алыс кармаңыз.

3. Пакеттин мазмуну

• 1 x DieseRC Wi-Fi+RF Smart Roller Shutter Controller Module

4. Техникалык шарттар

The compact size of the module allows for discreet installation behind most traditional wall switches or within junction boxes.

Image: The module's dimensions (45x45x16 mm) and various application scenarios such as curtains, roller blinds, garage doors, and awnings.

5. Орнотуу

Before proceeding with installation, ensure the main power supply is turned off at the circuit breaker to prevent electric shock.

5.1 Электр өткөргүч схемасы

The module supports 4-wire AC motors. Refer to the diagrams below for correct wiring with or without a traditional panel switch.

Image: Detailed wiring diagram showing connections for the module, AC motor, L/N inputs, and an optional traditional wired wall switch.

Image: Two wiring configurations: one showing the module connected with a traditional panel switch, and another showing it connected directly to the power supply and AC motor without a panel switch.

Зымдарды орнотуу кадамдары:

1. Кубатты өчүрүү: Turn off the main power supply to the circuit you are working on.
2. Кубат киргизүүнү туташтыруу: Connect the Live (L) and Neutral (N) wires from your AC power supply to the corresponding L and N terminals on the module.
3. Моторду туташтыруу: Connect the AC motor's wires to the L1 (Up), L2 (Down), and N (Neutral) terminals on the module. Ensure the motor's ground wire is properly connected to the electrical system's ground.
4. Connect Panel Switch (Optional): If using a traditional panel switch, connect its wires to the S1 and S2 terminals on the module, and the common wire to the L terminal.
5. Коопсуз байланыштар: Бардык зым байланыштары бекем жана коопсуз экендигин текшериңиз.
6. Орнотуу модулу: Carefully place the module into the electrical box or junction box.
7. Күчтү калыбына келтирүү: Негизги кубаттуулукту кайра күйгүзүңүз.

6. Орнотуу

6.1 Колдонмону орнотуу жана жупташтыруу

The module is compatible with the Tuya Smart or Smart Life applications.

1. Колдонмону жүктөп алуу: Download the "Tuya Smart" or "Smart Life" app from your smartphone's app store (available for Android and iOS). Alternatively, scan the QR code below.


Image: QR code for downloading the Tuya Smart application. Tuya Smart колдонмосун жүктөп алыңыз

2. Катталуу/Кирүү: Колдонмону ачып, жаңы аккаунт түзүңүз же бар аккаунт менен кириңиз.
3. Жупташтыруу режимине кирүү: After powering on the module, it should automatically enter pairing mode (indicated by a rapidly blinking Wi-Fi indicator light). If not, press and hold the learning button on the module for 5 seconds until the light blinks rapidly.
4. Түзмөк кошуу: In the app, tap "+" to add a new device. Select "Curtain Switch" or "Shutter Switch" from the device list.
5. Wi-Fi'га туташуу: Follow the in-app instructions to connect the module to your 2.4GHz Wi-Fi network. Ensure your phone is also connected to the same 2.4GHz network.
6. Түзмөктүн атын өзгөртүү: Once successfully added, you can rename the device for easier identification (e.g., "Living Room Blinds").

Image: Screenshot of the mobile application interface demonstrating remote control of the curtain module, indicating no distance limit for Wi-Fi control.

6.2 RF алыстан жупташтыруу

This module supports RF 433MHz remote controls with EV1527 learning code.

1. Окуу режимине кириңиз: Press the learning button on the receiver module бир жолу.
2. Алыстан башкаруу: Immediately press any button on your RF remote transmitter. The module's indicator light will flash to confirm successful pairing.

Note: The module can store approximately 20 transmitters. Some units may come pre-paired from the factory.

Image: Visual guide on how to connect a 433MHz remote control by pressing the learning button on the receiver once, then pressing a button on the remote.

6.3 Clearing RF Signal

To clear all paired RF remote controls from the module:

1. Clear Signal: Press the learning button on the receiver module 8 жолу. The indicator light will flash to confirm the signal has been cleared.

Note: After resetting, any previously paired RF transmitters will no longer control the module.

7. Операция

The DieseRC Smart Roller Shutter Controller Module offers multiple control methods for convenience.

Сүрөт: бүттүview of the multiple control modes available: APP control, RF Remote Control, Panel Switch, and Voice control.

7.1 Колдонмону башкаруу (Tuya Smart / Smart Life)

Once the module is paired with the app, you can control your roller shutters from anywhere with an internet connection.

• Ачык жабык: Use the virtual buttons in the app to fully open or close the shutters.
• Персенtage Control: Adjust the shutter position to a specific percentage (e.g., 50% open). The motor will automatically stop when it reaches the set position.


Image: The mobile application interface demonstrating the percentage control function, allowing users to set the curtain's opening level.

• График түзүү жана таймерлер: Set up schedules for automatic opening and closing at specific times (e.g., open at 8:00 AM, close at 10:00 PM). You can also set countdown timers.


Image: The mobile application interface illustrating the timing, scheduling, and countdown features for automated curtain control.

• Үй-бүлөлүк бөлүшүү: Share control of the device with other family members through the app.

7.2 Үн менен башкаруу

Integrate the module with Amazon Alexa or Google Home for hands-free control.

1. Каттоо эсебин байланыштыруу: In the Alexa or Google Home app, link your Tuya Smart/Smart Life account.
2. Түзмөктөрдү табуу: Үн жардамчыңыздан жаңы түзмөктөрдү табууну сураныңыз.
3. Үн буйруктары: Мындай буйруктарды колдонуңуз:
   • "Alexa, [Түзмөктүн аталышы]" ачыңыз
   • "Эй, Google, [Түзмөктүн аталышын] жаб"
   • "Alexa, set [Device Name] to 50%"

Image: A demonstration of voice control functionality, showing Amazon Alexa and Google Assistant devices responding to commands to open curtains.

7.3 RF алыстан башкаруу

Use a paired 433MHz RF remote control for local operation. The strong RF signal can pass through walls, floors, and doors, offering a control range of 30-50 meters in open areas.

7.4 Manual Switch Control

If a traditional panel switch is wired to the module, you can continue to use it for manual control of your roller shutters.

8. Тиркемелер

The DieseRC Wi-Fi+RF Smart Roller Shutter Controller Module can be used in various settings to automate and smarten up your home or office:

• Турак жай: Control window blinds, electric curtains, and garage doors in homes.
• Коммерциялык: Manage awnings or roller shutters in offices, shops, or factories.
• Жеткиликтүүлүк: Provides convenient control for individuals with mobility challenges.

9. Кыйынчылыктарды

• Модуль жооп бербейт: Check power connections and ensure the module is receiving power. Verify wiring according to the diagrams.
• Колдонмого туташуу маселелери: Ensure your Wi-Fi network is 2.4GHz. Check if the module is in pairing mode (blinking indicator). Restart your router and the module, then try pairing again.
• Радио жыштык пульту иштебей жатат: Ensure the remote is paired correctly. If not, repeat the RF pairing steps. Check the remote's battery.
• Мотор кыймылдабай жатат: Verify the motor is correctly wired to the L1, L2, and N terminals. Check the motor itself for any issues. Ensure the module's load capacity is not exceeded.
• Үн менен башкаруу иштебей жатат: Confirm that your Tuya Smart/Smart Life account is correctly linked to Alexa/Google Home. Ensure the device name is recognized by the voice assistant.

10. Колдоо

For further assistance or inquiries, please refer to the DieseRC brand store on Amazon or contact customer support through the retailer where the product was purchased. We are committed to providing effective solutions for our customers.