Homall Electric Standing Desk 120x60 cm User Manual

1. Коопсуздук боюнча маанилүү маалымат

Сураныч, чогултуу жана колдонуу алдында бардык нускамаларды кунт коюп окуп чыгыңыз. Бул колдонмону келечекте маалымат алуу үчүн сактаңыз.

• Do not exceed the maximum load capacity of 80 kg (176 lbs) to ensure stability and safety of the desk.
• Колдонуудан мурун, бардык бурамалар жана болттор бекем бекитилгенин текшериңиз.
• Иш учурунда балдарды жана үй жаныбарларын столдон алыс кармаңыз.
• Суюктуктарды түздөн-түз башкаруу панелине же электрдик тетиктердин жанына коюудан алыс болуңуз.
• If any unusual noise or movement occurs, immediately stop operation and consult the troubleshooting section.

2. Продукт бүтүп калдыview

The Homall Electric Standing Desk is designed to provide a healthy and ergonomic workspace, allowing seamless transitions between sitting and standing positions. It features a robust steel frame, a spacious wooden tabletop, and an intelligent control system with memory presets and an anti-collision function.

Image: The Homall Electric Standing Desk in beige, showcasing its clean design and control panel.

Негизги өзгөчөлүктөрү:

• Электр бийиктигин жөндөө: Smooth and quiet motor for effortless height changes.
• Эстутум алдын ала орнотуулары: Three programmable height settings for quick transitions.
• Кагылышууга каршы системасы: Кыймыл учурунда тоскоолдук табылса, автоматтык түрдө токтоп, артка жылат.
• Мыкты курулуш: All-steel frame supports up to 80 kg (176 lbs).
• Кабель башкаруу лоток: Integrated tray to keep your workspace tidy.
• USB кубаттоо порту: Convenient port on the control panel for charging devices.

3. Монтаждоо боюнча нускамалар

Follow these steps for proper assembly of your Homall Electric Standing Desk. It is recommended to have two people for assembly. Refer to the video below for a visual guide.

Видеону чогултуу боюнча колдонмо:

Кадамдык Ассамблея:

Refer to the included hardware and parts list. The tabletop consists of four parts that are joined during assembly.

1. Step 1: Attach Right Table Leg and Crossbar

   Secure the right table leg (Part 1) to the right crossbar (Part 9) using the provided M6x11mm screws (Part A). Refer to the assembly video for visual guidance.
2. Step 2: Attach Side Plate

   Attach the side plate (Part 7) to the assembled right leg and crossbar using M8x12mm screws (Part C). Refer to the assembly video for visual guidance.

3. Step 3: Attach Left Table Leg and Crossbar

   Repeat Step 1 for the left table leg (Part 2) and left crossbar (Part 8) using M6x11mm screws (Part A). Refer to the assembly video for visual guidance.

4. Step 4: Attach Second Side Plate

   Attach the second side plate (Part 7) to the assembled left leg and crossbar using M8x12mm screws (Part C). Refer to the assembly video for visual guidance.
5. Step 5: Connect Crossbars

   Use the connector (Part 10) to join the right and left crossbars, securing with M6x11mm screws (Part A). Refer to the assembly video for visual guidance.

6. Step 6: Join Tabletop Sections

   Use wooden dowels (Part F) to join tabletop sections (Parts 11, 12, 13, 14). Ensure they align correctly. Refer to the assembly video for visual guidance.

7. Step 7: Secure Tabletop Connectors

   Attach table connectors (Parts J and M) to the underside of the tabletop using M5x15mm screws (Part E) to reinforce the joints. Refer to the assembly video for visual guidance.
8. Step 8: Attach Tabletop to Frame

   Carefully place the assembled tabletop onto the desk frame. Align the pre-drilled holes and secure the tabletop to the frame using M5x15mm screws (Part E). Refer to the assembly video for visual guidance.

9. 9-кадам: Трансмиссия таякчасын орнотуу

   Insert the transmission rod (Part 4) into the designated slots, connecting the two leg mechanisms. Ensure it is fully engaged. Refer to the assembly video for visual guidance.

10. Step 10: Attach Cable Management Tray

    Mount the cable management tray (Part 15) to the underside of the desk using M5x12mm screws (Part D). This helps organize power strips and cables. Refer to the assembly video for visual guidance.
11. Step 11: Install Leg Bases

    Attach the leg bases (Part 3) to the bottom of each table leg using M6x35mm screws (Part B). Ensure the adjustable feet are facing down. Refer to the assembly video for visual guidance.

12. 12-кадам: Башкаруу панелин орнотуу

    Attach the control panel (Part 5) to the underside of the desk, typically on the front edge, using M5x15mm screws (Part E). Connect the motor cable to the control panel. Refer to the assembly video for visual guidance.

13. 13-кадам: Кулакчын илгичин орнотуу

    Attach the headphone hook (Part K) to the desired location on the underside of the desk using M5x15mm screws (Part E). Refer to the assembly video for visual guidance.

Once all components are assembled, plug the desk into a power outlet. Your Homall Electric Standing Desk is now ready for use.

4. Иштөө нускамалары

The control panel allows for easy adjustment of the desk height and programming of memory presets.

Image: Close-up of the desk's control panel with buttons for height adjustment, memory presets, and a digital display.

Башкаруу панелинин функциялары:

• Өйдө/Төмөн жебелери (▲ / ▼): Press and hold to adjust the desk height manually. Release to stop at the desired height.
• Эстутум алдын ала орнотуулары (1, 2, 3):
  1. Өйдө/Төмөн жебелери аркылуу үстөлдү каалаган бийиктикке тууралаңыз.
  2. Press the 'M' button (or similar memory button, often represented by a clock icon or 'S'). The display will show 'S-'.
  3. Within 3 seconds, press the desired preset button (1, 2, or 3). The display will show 'S-1', 'S-2', or 'S-3' to confirm the setting is saved.
  4. To recall a saved height, simply press the corresponding preset button (1, 2, or 3). The desk will automatically move to the saved position.
• Кагылышууга каршы системасы: The desk is equipped with an anti-collision feature. If the desk encounters an obstacle during height adjustment, it will automatically stop and reverse slightly to prevent damage.
• USB кубаттоо порту: A USB port is integrated into the control panel for convenient charging of small electronic devices.

Using the Sit-Stand Function:

Regularly alternating between sitting and standing positions can promote better posture and reduce discomfort during long work sessions.

Image: A user transitioning between sitting and standing positions at the Homall Electric Standing Desk, highlighting its ergonomic benefits.

Use the memory presets to quickly switch between your preferred sitting and standing heights. For example, program preset 1 for your sitting height and preset 2 for your standing height.

Продукт бүттүview Видео:

5. Техникалык тейлөө

Proper maintenance ensures the longevity and optimal performance of your electric standing desk.

• Тазалоо: Үстөлдүн үстүн жана алкагын жумшак, г менен сүртүңүзamp кездеме. Абразивдүү тазалагычтардан же финишке зыян келтирүүчү катаал химиялык заттардан алыс болуңуз.
• Кабелдик башкаруу: Periodically check and organize cables in the management tray to prevent tangling or damage.
• Бурама тыгыздыгы: Every few months, check all screws and bolts to ensure they remain tight. Retighten if necessary.
• Мотор багуу: The electric motor is designed for durability. Avoid overloading the desk beyond its maximum capacity to prevent strain on the motor.

6. Кыйынчылыктарды

If you encounter any issues with your Homall Electric Standing Desk, refer to the following common troubleshooting steps:

If the problem persists after trying these solutions, please contact Homall customer support.

7. Техникалык шарттар

8. Кепилдик жана колдоо

Homall offers comprehensive support for its products.

• Кайтаруу саясаты: Enjoy a free and unconditional 30-day return service.
• Кепилдик: A 5-year replacement or repair service is provided for this product.
• For any questions, concerns, or warranty claims, please contact Homall customer support through your purchase platform or the official Homall webсайт.