WONLINK AC1200 Outdoor Gigabit Wireless Access Point

Introduction

The WONLINK AC1200 Outdoor Gigabit Wireless Access Point is designed to extend and enhance your Wi-Fi network outdoors. It supports dual-band operation (2.4GHz and 5GHz) and multiple operating modes, making it suitable for various outdoor networking needs. Its robust, weatherproof design ensures reliable performance in diverse environmental conditions.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизде бар экенин текшериңиз:

• 1 x Outdoor WiFi Extender
• 1 x 48V PoE адаптери
• 2 x Stainless Ties
• 2 х бурамалар
• 2 x Силикон пломбалары

Негизги өзгөчөлүктөрү

• 1200Mbps Outdoor WiFi Extender: Compliant with IEEE 802.11 ac/a/b/g/n network standards, offering speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz. Ideal for HD streaming and online gaming.
• Flexible Installation & Gigabit Ports: Integrated Power over Ethernet (PoE) support allows installation in locations without direct power outlets. Features dual Gigabit (1000Mbps) LAN/WAN Ethernet ports for high-speed network connections.
• Бир нече иштөө режимдери: Supports Repeater, AP (Access Point), Router, and Bridge modes to accommodate various network environments and applications.
• Advanced WiFi Security Protocol: Incorporates 128-bit encryption and WPA/WPA2/WPA-PSK/WPA2-PSK protocols to secure your network and prevent unauthorized access.
• Outdoor Weatherproof and Moisture-proof Design: IP66 certified weatherproof and heat-resistant shell with a waterproof silicone ring ensures continuous operation in harsh outdoor conditions, including extreme cold, heat, or humidity (-10°C to 60°C).

Продукт бүттүview

Сүрөт 1: Алдыңкы view of the WONLINK AC1200 Outdoor Gigabit Wireless Access Point, showing its two antennas and signal indicators.

Figure 2: High-speed AC1200 Dual Band Outdoor Access Point capabilities, highlighting 867Mbps on 5.8G and 300Mbps on 2.4G.

Орнотуу нускамалары

Ethernet аркылуу кубаттоо (PoE) туташуусу

The device supports Power over Ethernet (PoE), allowing both power and data transmission over a single Ethernet cable. This simplifies installation, especially in outdoor environments where power outlets may not be readily available.

Figure 3: Illustration of the Power Over Ethernet (PoE) setup, demonstrating how the 48V PoE adapter connects to the device via an Ethernet cable, supporting distances up to 100 meters.

Initial Setup via PC

Follow these steps for initial configuration using a computer:

1. Connect to the device's default Wi-Fi network, typically named "WONLINK-XXXX-2G" or "WONLINK-XXXX-5G", using your computer.
2. ачуу а web browser and enter the default IP address "192.168.10.1" in the address bar.
3. Enter the default username "admin" and password "admin" to log in.
4. Select the desired operating mode (e.g., AP Mode) and set a new IP address. The new IP address must be on the same subnet as your router, but the last digit must be different.
5. Enter your desired Wi-Fi password. It is recommended to use a strong password different from your router's password.
6. Click "Finish" to apply the configuration. Once successful, you can enjoy your Wi-Fi network.

Figure 4: Visual guide for the PC-based setup process.

Иштөө режимдери

The WONLINK AC1200 supports multiple operating modes to suit various network configurations:

• AP режими (кирүү чекити): Converts a wired network connection into a wireless one, allowing multiple devices to connect wirelessly.
• Кайталоо режими: Extends the coverage of an existing Wi-Fi network by receiving the wireless signal and re-transmitting it.
• Багыттоочу режим: Functions as a primary router, connecting to a modem and providing network access to connected devices.
• Көпүрө режими: Connects two separate networks, often used to link wired networks wirelessly.

Figure 5: ашыкview of the multiple working modes supported by the device.

Техникалык тейлөө

To ensure optimal performance and longevity of your outdoor access point, consider the following maintenance guidelines:

• Үзгүлтүксүз текшерүү: Periodically check the device and its connections for any signs of wear, damage, or loose cables.
• Тазалык: Keep the device free from dust, dirt, and debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners or aerosols.
• Курчап турган чөйрөнү коргоо: While the device is IP66 weatherproof, ensure it is installed in a location that minimizes direct exposure to extreme weather conditions where possible, such as heavy snow accumulation or direct, prolonged sunlight in very hot climates.
• Программалык камсыздоонун жаңыртуулары: Өндүрүүчүнү текшериңиз webсайтты микропрограммалык камсыздоону жаңыртуу үчүн мезгил-мезгили менен текшерип туруңуз. Микропрограммалык камсыздоону жаңыртып туруу иштин натыйжалуулугун жакшыртып, жаңы функцияларды кошуп жана коопсуздукту жогорулатат.

Figure 6: The device features an IP67 weatherproof enclosure, providing protection against water, cold, lightning, wind, and high temperatures.

Проблемаларды чечүү

If you encounter issues with your WONLINK AC1200 Outdoor Gigabit Wireless Access Point, try the following steps:

• Кубат жок: Ensure the PoE adapter is properly connected to a power source and the Ethernet cable is securely plugged into both the adapter and the device. Check the power indicator light on the PoE adapter.
• Интернет байланышы жок: Verify that your main router or modem is functioning correctly and has an active internet connection. Check all Ethernet cable connections.
• Алсыз сигнал же жай ылдамдык: Ensure the device is positioned optimally, away from obstructions and sources of interference. Consider adjusting the antennas. If in Repeater mode, ensure the device is within good range of the main router.
• Кирүү мүмкүн эмес Web Интерфейс: Double-check the IP address entered in the browser. Ensure your computer is connected to the device's Wi-Fi network or directly via Ethernet. Try clearing your browser's cache or using a different browser.
• Аппаратты баштапкы абалга келтирүү: If issues persist, you may need to perform a factory reset. Locate the reset button (often a small pinhole) and press and hold it for approximately 5-10 seconds while the device is powered on. This will restore the device to its default factory settings.

Техникалык шарттар

Кепилдик жана колдоо

For detailed warranty information and technical support, please refer to the official WONLINK website or contact their customer service. A digital copy of the Instructions for Use (IFU) is available in PDF format for further reference.

Колдонуу боюнча нускамаларды жүктөп алыңыз (PDF)