OMTech CW-5200 6L өнөр жайлык суу муздаткычынын колдонуу боюнча колдонмосу

1. Продукт бүтүп калдыview

The OMTech CW-5200 Industrial Water Chiller is designed to provide efficient and stable cooling for CO2 laser engraving and cutting machines. It features a 6-liter water tank, a 0.9 HP compressor, and a cooling capacity of 5186 BTU/hour, ensuring optimal performance for laser tubes up to 150W. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

Figure 1: OMTech CW-5200 Industrial Water Chiller, front-side view.

Figure 2: The CW-5200 Water Chiller in operation with a laser engraver.

2. Коопсуздук нускамалары

Read all safety warnings and instructions carefully before operating the chiller. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Муздаткычтын туруктуу, тегиз бетке коюлганын текшериңиз.
• Connect the chiller to a properly grounded power outlet.
• Do not operate the chiller with damaged power cords or plugs.
• Keep the chiller away from heat sources, flammable materials, and direct sunlight.
• Ensure adequate ventilation around the chiller to prevent overheating.
• Do not immerse the chiller in water or other liquids.
• Use only distilled water or recommended laser coolant. Do not add tap water directly.
• Always disconnect power before performing any maintenance or refilling the water tank.
• Keep children and unauthorized personnel away from the operating chiller.

3. Продукциянын компоненттери

Familiarize yourself with the main components of your CW-5200 water chiller.

Figure 3: Front Panel Features
1. Power Switch
2. Температураны чагылдыруу
3. Built-in Handles

Figure 4: Rear Panel Features
1. Суу инжектордук порт
2. Power Socket (with Spare Fuse)
3. Alarm Output Terminal
4. Cooling Water Outlet
5. Cooling Water Inlet
6. Water Level Gauge
7. Radiator Fans
8. Суу агызуучу

Figure 5: High-grade brass inlet and outlet ports for secure connections.

4. Орнотуу нускамалары

Follow these steps for initial setup of your water chiller.

1. Пакеттен чыгаруу: Carefully remove the chiller from its packaging. Inspect for any damage during transit.
2. Жайгашкан жери: Place the chiller on a flat, stable surface in a well-ventilated area. Ensure there is at least 20 cm (8 inches) of space around the unit for proper airflow.
3. Сууну толтуруу: Unscrew the water injection port cap (1 in Figure 4). Fill the tank with approximately 6 liters (1.6 gallons) of distilled water or OMTech laser coolant. Monitor the water level gauge (6 in Figure 4) to ensure the level is within the green zone. Do not overfill.


Figure 6: Use of OMTech Laser Coolant for optimal performance.


Figure 7: The 6L enclosed water tank design.
4. Суу түтүктөрүн туташтыруу: Connect the water inlet of your laser machine to the Cooling Water Outlet (4 in Figure 4) of the chiller. Connect the water outlet of your laser machine to the Cooling Water Inlet (5 in Figure 4) of the chiller. Secure all connections to prevent leaks.
5. Кубат туташуу: Connect the power cord to the Power Socket (2 in Figure 4) on the chiller and then plug it into a grounded electrical outlet.

5. Иштөө нускамалары

Operating the CW-5200 chiller is straightforward once properly set up.

1. Күйгүзүү: Flip the Power Switch (1 in Figure 3) to the 'ON' position. The chiller will start, and the temperature display will illuminate.
2. Initial Circulation: Allow the chiller to run for a few minutes to circulate the water and remove any air bubbles from the system. Check the water level gauge again and add more water if necessary.
3. Температура мониторинги: The digital display (2 in Figure 3) shows the current water temperature. The chiller is designed to maintain the water temperature within 0.3°C of the set point.

Figure 8: Real-time temperature display for precise monitoring.


Figure 9: Digital display and indicators provide real-time feedback.

4. Лазердик операция: Once the chiller has reached a stable operating temperature, you can begin operating your CO2 laser machine. The chiller will automatically regulate the water temperature to prevent overheating of the laser tube.
5. Өчүрүү: After use, turn off your laser machine first, then switch off the chiller using the Power Switch.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your chiller.

• Сууну алмаштыруу: Replace the cooling water every 1 to 3 months, depending on usage and environmental conditions. Always use distilled water or OMTech laser coolant.
• Clean Radiator Fins: Periodically clean the radiator fins (7 in Figure 4) to ensure efficient heat dissipation. Use a soft brush or compressed air to remove dust and debris.
• Суунун деңгээлин текшерүү: Regularly check the water level gauge and refill if the level drops below the green zone.
• Дренаж: Use the water drain port (8 in Figure 4) to empty the tank when replacing water or storing the unit.


Figure 10: Quick drainage system for easy water removal.

• Шлангдарды текшерүү: Periodically inspect all water hoses for kinks, cracks, or leaks. Replace any damaged hoses immediately.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your CW-5200 chiller.

• Chiller Not Turning On:
  • Check if the power cord is securely plugged into both the chiller and the wall outlet.
  • Кубат баскычы "ON" абалында экенин текшериңиз.
  • Check the fuse in the power socket (2 in Figure 4). Replace if blown.
• Суу айланбайт:
  • Ensure the water level is adequate.
  • Check for kinks or blockages in the water hoses.
  • Verify that the pump is operating (listen for pump noise).
• Суунун температурасынын жогорулашы тууралуу сигнализация:
  • Ensure the chiller's radiator fins are clean and not obstructed.
  • Verify that the ambient room temperature is not excessively high.
  • Check if the cooling fans are operating.
  • Ensure the water level is sufficient.
• Суу агып кетиши:
  • Inspect all hose connections for tightness.
  • Check hoses for any damage or cracks.

If issues persist, contact OMTech customer support for assistance.

8. Техникалык шарттар

Detailed technical specifications for the OMTech CW-5200 Water Chiller.

Figure 11: Key specifications of the CW-5200 Chiller.

9. Кепилдик жана колдоо

OMTech provides comprehensive support for its products.

• Кепилдик: This product comes with a 1-year warranty. Please refer to your purchase documentation for specific terms and conditions.
• Кардарларды колдоо: Our 24/7 global support team is available to provide expert assistance, including technical guidance.
• Байланыш: For support, please visit the official OMTech webсайтка же сатып алууда берилген байланыш маалыматына кайрылыңыз.