Introduction
This user manual provides detailed instructions for the assembly, operation, and maintenance of your TECLUNG Metal Detector. Designed for both beginners and experienced enthusiasts, this device features a waterproof search coil, an intuitive LCD display, and multiple detection modes to enhance your treasure hunting experience. Please read this manual thoroughly before using the metal detector to ensure proper function and safety.
Продукт компоненттери
Your TECLUNG Metal Detector package includes the following main components:
- Control Box with LCD Display
- 10 дюймдук суу өткөрбөй турган издөө катушкасы
- Жөнгө салынуучу өзөк
- Arm Support and Hand Rest
- Headphones (included with some models)
- Shovel (included with some models)
1-сүрөт: Бүттүview of the TECLUNG Metal Detector and its accessories.
2-сүрөт: Key structural components of the metal detector.
Орнотуу жана чогултуу
1. Ассамблея
- Attach the search coil to the lower stem using the provided bolt and nut. Ensure it is securely fastened but allows for slight angle adjustment.
- Connect the lower stem to the middle stem, and then connect the middle stem to the upper stem (which includes the control box and arm support).
- Adjust the length of the stem to a comfortable height, allowing the search coil to be parallel to the ground when you are standing upright.
- Secure the arm support and hand rest for comfortable operation.
- Wrap the search coil cable neatly around the stem, ensuring it is not too tight or loose, and plug the connector into the port on the control box.
2. Батареяны орнотуу
The TECLUNG Metal Detector requires two (2) 9-volt batteries for operation. Ensure you use fresh, high-quality batteries for optimal performance.
- Locate the battery compartment on the back of the control box.
- Батарея уясынын капкагын ачыңыз.
- Insert two 9-volt batteries, observing the correct polarity (+/-) as indicated inside the compartment.
- Батарея уясынын капкагын бекем жабыңыз.
Эскертүү: Эгерде детектор узак убакыт бою колдонулбаса, агып кетүүнү жана бузулууну алдын алуу үчүн батареяларды алып салыңыз.
Иштөө нускамалары
1. Күйгүзүү жана өчүрүү
- To power on the detector, press the Күйгүзүү/ӨЧҮРҮҮ button (usually marked with a power symbol) on the control box.
- Өчүрүү үчүн, басып туруңуз Күйгүзүү/ӨЧҮРҮҮ баскычын дисплей өчмөйүнчө басыңыз.
2. LCD дисплейди түшүнүү
The intuitive LCD display provides crucial information during detection. Familiarize yourself with the indicators:
3-сүрөт: LCD Display and Control Panel Layout.
- Target Cursor: Indicates the probable type of metal detected (e.g., iron, foil, nickel, aluminum, zinc, copper, silver, gold).
- Digital Cursor: Provides a numerical ID for the detected target, aiding in identification.
- Depth Cursor: Estimates the depth of the detected object (e.g., 2", 4", 6", 8"+).
- Battery Cursor: Учурдагы батареянын деңгээлин көрсөтөт.
- Volume Cursor: Indicates the current audio volume level.
- SENS (сезгичтик): Adjusts the detector's sensitivity to targets. Higher sensitivity can detect smaller or deeper objects but may also pick up more interference.
- РЕЖИМ: Cycles through the different detection modes.
- PP (Pinpoint): Activates the pinpoint function for precise target location.
3. Сезгичтикти жөндөө (SENS)
басыңыз SENS button and use the arrow buttons (Көбөйтүү/азайтуу) to adjust the sensitivity level. Start with a moderate sensitivity and increase it if needed, or decrease it if experiencing false signals.
4. Үндү тууралоо
колдонуу Көлөм buttons (often integrated with arrow keys or a dedicated button) to increase or decrease the audio output.
Аныктоо режимдери
Your TECLUNG Metal Detector features 5 distinct detection modes, allowing you to optimize your search for specific types of targets. Press the РЕЖИМ баскычын басыңыз.
4-сүрөт: Бүттүview of the 5 Detection Modes.
- Бардык металл режими:
Detects all types of metal objects. This mode is ideal for general searching when you want to find any metallic item, regardless of its composition. The detector will notify you of every metal it senses.
- ДИСК (Дискриминация) режими:
Allows you to eliminate unwanted metal targets (e.g., iron trash) from detection. You can set the discrimination level to ignore certain types of metals, focusing only on valuable targets. Use the arrow buttons to adjust the discrimination range.
- Зергерчилик режими:
Specifically tuned to find jewelry such as rings, necklaces, and bracelets. This mode typically discriminates against iron and other common trash metals.
- Эстутум режими:
Detects only the metal targets that you have previously memorized or programmed into the detector. Consult the full manual for detailed instructions on how to set and use the memory function.
- Тактоо (PP) режими:
Once a target is detected, press the PP button to activate pinpoint mode. This mode helps you accurately locate the exact position of the target before digging, minimizing excavation size.
Usage Tips and Best Practices
1. Сөөптөө техникасы
Hold the search coil parallel to the ground, about 1-2 inches above the surface. Swing the coil slowly from side to side in overlapping sweeps. Maintain a consistent speed and height for best results.
2. Суу өткөрбөй турган издөө катушкасы
The 10-inch search coil is waterproof (IP68 rated), allowing for detection in shallow water, streams, and beaches. The control box is not waterproof and should not be submerged.
5-сүрөт: The waterproof search coil allows for detection in shallow water.
3. Detection Depth
The detector is capable of detecting objects up to 10 inches deep, depending on the size, composition, and orientation of the target, as well as soil conditions.
6-сүрөт: The detector can find targets up to 10 inches deep.
Техникалык тейлөө жана кам көрүү
- Тазалоо: Ар бир колдонуудан кийин, өзгөчө кумдуу же ылайлуу шарттарда, издөө тилкесин сүртүп, жарнама менен сабагынamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонуудан алыс болуңуз.
- Башкаруу кутусу: Keep the control box dry and clean. If it gets wet, wipe it immediately. Do not submerge the control box.
- Сактагыч: Store the metal detector in a cool, dry place. If storing for an extended period, remove the batteries to prevent corrosion.
- Катушки коргоо: Consider using a coil cover (if available) to protect the search coil from scratches and abrasions.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| No power / Detector does not turn on. |
|
|
| False signals / Erratic beeping. |
|
|
| Poor detection depth. |
|
|
| Дисплей күңүрт же окулбайт. |
|
|
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | TECLUNG |
| Модель номери | GT |
| Түс | Көк |
| Материал | Металл |
| Power Source | Батарея менен иштейт (2 x 9V батарейка талап кылынат) |
| Элемент Салмагы | 3.7 фунт (болжол менен 1.68 кг) |
| Продукциянын өлчөмдөрү | 10 x 2 x 2.7 дюйм (башкаруу кутусу) |
| Узундук | Adjustable (up to approx. 40 inches) |
| Эл аралык коргоо рейтинги | IP68 (Издөө катушкасы гана) |
| Иштөө жыштыгы | 7 KHz |
| Дисплей түрү | Арткы жарык менен LCD |
| Number of Programs/Modes | 5 (All Metal, DISC, Jewelry, Memory, Pinpoint) |
| Сунушталган Колдонуулар | Металл аныктоо |
Кепилдик жана колдоо
TECLUNG products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the contact information provided with your product packaging or visit the official TECLUNG webсайт. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.
For further assistance, you may contact TECLUNG customer service through their official channels. Always provide your product model number (GT) and purchase date when seeking support.
