Kidzone Smart Bumper Car Instruction Manual

Introduction

This manual provides essential information for the safe and proper operation of your Kidzone Smart Bumper Car. Designed for toddlers and children aged 1.5 to 6 years old, this 12V electric ride-on toy features 2-speed settings, remote control, APP control, LED lights, Bluetooth connectivity, and a 360-degree spin function. Please read all instructions carefully before assembly and use.

Кутуда эмне бар

• Ride on Car
• Заряддагыч
• Алыстан башкаруу
• Manual

Коопсуздук маалыматы

The Kidzone Smart Bumper Car is constructed from durable and non-toxic plastic, complying with ASTM/CPSIA/CPSC/CA Prop 65/FCC safety regulations. It includes an adjustable 5-point seat belt, anti-flat tires, and a cushioned rubber bumper to minimize impact. A slow start safety feature ensures smooth and controlled acceleration.

ЭСКЕРТҮҮ: Бул продукт Калифорния штатында рак жана тубаса кемтик же башка репродуктивдүү зыян алып келүүчү химиялык заттарга дуушар болушу мүмкүн. Көбүрөөк маалымат алуу үчүн өтүңүз www.P65Warnings.ca.gov.

ЭСКЕРТҮҮ: The vehicle must be OFF and cannot be operated when charging. Fully charge the battery for 8-12 hours, cannot more than 20 hours. Damage to the battery may occur if it is completely drained. Charge the battery at least once a month even if not operating the vehicle to maximize the battery life.

Орнотуу жана чогултуу

Before first use, some assembly is required. Ensure all components are present and undamaged. The battery will come detached and needs to be connected. The backrest also needs to be securely attached.

Батареянын туташуусу

Locate the battery compartment, usually under the seat. Connect the battery terminals as instructed. You will need a Phillips head screwdriver to access the battery compartment.

Image: Kidzone Smart Bumper Car in white, highlighting the 5-point harness and control panel. This image shows the overall design and key safety features.

Артка тиркеме

The backrest needs to be popped into place. Be mindful of the wire connection for the lights on one side. Ensure the wire is pushed through the designated hole to prevent obstruction and allow the backrest to close completely.

Алыстан башкаруунун батареясын орнотуу

The remote control requires two AAA batteries (not included). Use a small Phillips head screwdriver to open the battery compartment on the back of the remote and insert the batteries.

Батареяны заряддоо

Before initial use, fully charge the 12V rechargeable battery for 8-12 hours. Do not charge for more than 20 hours. Plug the charger into the designated port on the control panel. The vehicle must be OFF during charging. Charge the battery at least once a month, even if not in use, to maximize battery life.

Image: Close-up of the control panel on the Kidzone Smart Bumper Car, displaying the power button, speed settings (fast/slow), light controls (upper/lower), and battery level indicator. The charging port is also visible.

Иштөө нускамалары

The bumper car offers three driving modes: joystick input, 2.4G remote control, and APP control. It features multi-colored LED lights and Bluetooth connectivity for music.

Күйгүзүү/өчүрүү

Press the red power button on the control panel to turn the car on or off. A sound will indicate power status.

Айдоо режимдери

• Joystick Input Mode: For children to drive independently. Use the two joysticks to control direction and 360-degree spins.
• 2.4G Remote Control Mode: For parental control. Use the provided remote to steer, move forward/backward, and adjust speed. The 'S' button on the remote adjusts speed, and 'P' is an emergency brake.
• APP Control Mode: Connect the car via Wi-Fi to the free Kidzone APP (iOS/Android). Control direction, speed, lights, and music through the app. The app also includes "Play Mode" games.

Image: Close-up of the control panel on the Kidzone Smart Bumper Car, displaying the power button, speed settings (fast/slow), light controls (upper/lower), and battery level indicator. This panel allows selection of driving modes and light settings.

Image: A child seated in a Kidzone Smart Bumper Car, while a parent holds the remote control, demonstrating the parental control feature.

Ылдамдык орнотуулары

Select between fast (1.3 mph) and slow (0.75 mph) speeds using the buttons on the control panel or via the remote/app.

LED Lights and Bluetooth

The bumper car features multi-colored LED lights on the upper and lower sections. These can be controlled via the panel or app. Bluetooth connectivity allows playing music or audio files from a connected device.

Image: Kidzone Smart Bumper Car with various DIY stickers (letters, numbers, ice cream) applied, illustrating the customization feature for children.

Техникалык тейлөө

• Regularly inspect the car for any loose parts or damage.
• Clean the car with a damp кездеме. Катуу химиялык заттардан алыс болуңуз.
• Ensure the battery is charged at least once a month to prolong its lifespan.
• Store the car in a dry place away from direct sunlight when not in use.

Проблемаларды чечүү

If the bumper car is not operating correctly, check the following:

• Car not turning on: Батарея туура туташтырылганын жана толук заряддалганын текшериңиз.
• Пульт иштебей жатат: Check if the remote has fresh AAA batteries and is correctly paired with the car.
• Унаа жүрбөй жатат: Verify that the correct driving mode (joystick or remote) is selected on the control panel. Ensure no obstructions are blocking the wheels.
• Төмөндөтүлгөн аткаруу: This may indicate a low battery charge. Recharge the battery for the recommended duration.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or customer support, please refer to the documentation included with your product or contact Kidzone customer service directly. Keep your purchase receipt for any warranty claims.