Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Sharp XE-A207B Electronic Thermal Cash Register. Please read this manual thoroughly before using the device to ensure proper functionality and longevity. Keep this manual for future reference.
Figure 1: Sharp XE-A207B Electronic Thermal Cash Register. This image shows the complete unit, including the main register body, integrated thermal printer, customer display, operator display, and cash drawer.
1. Орнотуу жана баштапкы конфигурация
1.1 Таңгактан чыгаруу жана текшерүү
Carefully remove all components from the packaging. Verify that all items listed in the packing list are present and undamaged. Retain the packaging for future transport or storage.
1.2 Кубат туташтыруу
- Ensure the cash register is placed on a stable, flat surface.
- Connect the power cord to the power input port on the rear of the cash register.
- Электр шнурунун экинчи учун жерге туташтырылган электр розеткасына сайыңыз.
- Turn on the main power switch, typically located on the side or rear of the unit.
1.3 Кагаз рулеттерин орнотуу
- Принтердин капкагын кулпуну көтөрүп ачыңыз.
- Insert a new thermal paper roll, ensuring the paper feeds from the bottom and the leading edge is straight.
- Pull a small amount of paper past the cutting edge.
- Принтердин капкагын ордуна чыкылдаган үн чыкканча бекем жабыңыз.
1.4 Initial Date and Time Setting
Upon first power-on, the register may prompt for date and time settings. Follow the on-screen instructions or refer to the programming section for detailed steps on setting the correct date and time.
1.5 Накталай акча тартмасын туташтыруу
Connect the cash drawer cable to the designated port on the rear of the cash register. The cash drawer will automatically open during specific transactions (e.g., cash sales, no-sale operations).
2. Иштөө нускамалары
2.1 Basic Sales Transaction
- Turn the Mode Switch to the REG (Register) position.
- Enter the item price using the numeric keypad.
- Press the appropriate Department key (e.g., DEPT 1). Repeat for additional items.
- To finalize the sale, press the БАРДЫГЫ ачкыч.
- Кардардан алынган сумманы киргизиңиз.
- басыңыз НАК акча key. The register will print a receipt and display the change due.
2.2 Using PLU (Price Look-Up) Items
For items programmed with PLU codes:
- Turn the Mode Switch to REG.
- Enter the PLU number.
- басыңыз PLU key. The item's pre-programmed price will be registered.
- Proceed with the transaction as described in Section 2.1.
2.3 Voiding and Refunds
- Voiding an Item (before TOTAL): Enter the item price, press the Department key, then press the VOID ачкыч.
- Refund (after TOTAL): Turn the Mode Switch to КАЙТАРУУ (if available) or REG жана колдонуңуз КАЙТАРУУ function. Enter the amount to be refunded and press the НАК акча key. Consult the programming guide for specific refund procedures.
2.4 Daily Reports (X-Report and Z-Report)
- X-Report (Reading Report): Provides a current summary of sales without clearing totals. Turn the Mode Switch to X, андан кийин басыңыз БАРДЫГЫ ачкыч.
- Z-Report (Reset Report): Clears daily sales totals and prints a comprehensive summary. This report should be run at the end of each business day. Turn the Mode Switch to Z, андан кийин басыңыз БАРДЫГЫ ачкыч.
3. Техникалык тейлөө
3.1 Агрегатты тазалоо
Regular cleaning helps maintain the performance and appearance of your cash register.
- Тазалоодон мурун электр шнурын ажыратыңыз.
- Сырткы беттерин жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Use a soft brush or compressed air to remove dust and debris from the keypad and printer area.
- Clean the thermal print head periodically with a specialized thermal printer cleaning pen or isopropyl alcohol on a cotton swab. Allow to dry completely before use.
3.2 Кагаз түрмөгүн алмаштыруу
Refer to Section 1.3 for detailed instructions on replacing the thermal paper roll.
4. Кыйынчылыктарды
This section addresses common issues you might encounter with your Sharp XE-A207B cash register. For problems not listed here, contact customer support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Register does not power on. | Power cord disconnected; power switch off; power outlet issue. | Check power cord connection; ensure power switch is ON; test outlet with another device. |
| Printer not printing or printing faintly. | Paper roll empty or incorrectly installed; non-thermal paper used; print head dirty. | Replace paper roll correctly (ensure thermal side is facing print head); use thermal paper only; clean print head. |
| Cash drawer does not open. | Drawer not connected; drawer lock engaged; mechanical obstruction. | Verify drawer cable connection; ensure drawer is unlocked; check for obstructions inside or around the drawer. |
| Ката билдирүү дисплейде. | Operational error; programming error. | Refer to the specific error code in the full programming manual (if available) or restart the unit. |
5. Техникалык шарттар
The following are key specifications for the Sharp XE-A207B Electronic Thermal Cash Register:
- Модел: XE-A207B
- Бренд: Sharp
- Принтердин түрү: Термикалык принтер
- Дисплей: Operator and Customer Displays
- Cash Drawer: Integrated, secure cash drawer
- Байланыш: (Not specified in input, assume standard power and drawer connection)
- Биринчи жеткиликтүү болгон күнү: 7-жылдын 2023-ноябры
6. Кепилдик жана колдоо
Кепилдик жөнүндө маалымат алуу үчүн, өнүмүңүз менен кошо берилген кепилдик картасын караңыз же расмий Sharp дүкөнүнө баш багыңыз website. For technical support, service, or spare parts availability, please contact your local Sharp authorized service center or the retailer from whom you purchased the product.
Эскертүү: Spare part information is not available or provided directly within this product's specifications as per initial data.
