ID-COOLING FROZN A410 ARGB White CPU Cooler Instruction Manual

1. Киришүү

This manual provides detailed instructions for the ID-COOLING FROZN A410 ARGB White CPU Cooler. This high-performance air cooler is designed to provide efficient heat dissipation for your CPU, featuring 4 copper heat pipes, a 120mm Fluid Dynamic Bearing (FDB) fan, and vibrant Addressable RGB (ARGB) lighting. It offers excellent compatibility with various RAM modules due to its single tower design.

Негизги өзгөчөлүктөрү:

• Натыйжалуу жылуулук диссипациясы: Equipped with 4 heat pipes and a 120mm FDB fan for optimal CPU cooling.
• Жандуу ARGB жарыктандыруу: Integrated ARGB lighting on the top cover and fan for customizable visual effects.
• RAM Compatibility: Single tower design ensures perfect compatibility with various RAM configurations.
• Суюктуктун динамикалык подшипник желдеткичи: Provides longer lifespan, quieter operation, reduced vibration, and improved efficiency.

2. Орнотуу жана орнотуу

Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket details. The ID-COOLING FROZN A410 ARGB White CPU Cooler supports Intel LGA1700/1851/1200/115X and AMD AM4/AM5 sockets.

2.1. Камтылган компоненттер

Орнотуудан мурун бардык компоненттер бар экендигин текшериңиз:

• Heatsink with 4 heat pipes
• 120мм ARGB желдеткич
• Intel Backplate (for LGA1700/1200/115X)
• Intel Brackets
• AMD Brackets
• Монтаждоочу бурамалар жана гайкалар
• Rubber Spacers (Black for Intel LGA1700, Grey for Intel LGA1200/115X, Red for AMD)
• Термикалык май

Сүрөт 1: Бүттүview of the mounting hardware included with the FROZN A410 ARGB White CPU Cooler, showing components for both Intel and AMD platforms.

2.2. Intel LGA1700/1851/1200/115X Installation

1. Арткы бетин даярдоо: For LGA1700, move the screws of the Intel Backplate to the outermost position. For LGA1200/115X, move them to the innermost position. Install the backplate on the back of the motherboard.
2. Spacers орнотуу: Place the appropriate rubber spacers (Black for LGA1700, Grey for LGA1200/115X) onto the backplate screws protruding through the motherboard.
3. Коопсуз кашаалар: Place the Intel mounting brackets on top of the spacers, aligning them with the CPU socket. Secure with the tightening nuts.
4. Термикалык пастаны колдонуу: Clean the CPU surface thoroughly. Apply a small amount of thermal paste (included) to the center of the CPU.
5. Жылытуучу раковинаны орнотуу: Remove the protective sticker from the heatsink base. Carefully place the heatsink onto the CPU, aligning the mounting holes with the bracket screws. Tighten the screws in a diagonal pattern until secure.
6. Желдетүүчүнү тиркөө: Use the provided fan clips to secure the 120mm ARGB fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink fins towards the rear of the case.
7. Кабелдерди туташтыруу: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard or ARGB controller.

2.3. AMD AM4/AM5 орнотуусу

Эскертүү: The original backplate of your AMD motherboard is required for installation.

1. Акцияларды сактоону алып салуу: Remove the plastic retention module from the motherboard, but keep the stock metal backplate.
2. Spacers орнотуу: Place the red AMD standoffs onto the backplate screws.
3. Коопсуз кашаалар: Place the AMD mounting brackets on top of the standoffs, aligning them with the CPU socket. Secure with the tightening screws.
4. Термикалык пастаны колдонуу: Clean the CPU surface thoroughly. Apply a small amount of thermal paste (included) to the center of the CPU.
5. Жылытуучу раковинаны орнотуу: Remove the protective sticker from the heatsink base. Carefully place the heatsink onto the CPU, aligning the mounting holes with the bracket screws. Tighten the screws in a diagonal pattern until secure.
6. Желдетүүчүнү тиркөө: Use the provided fan clips to secure the 120mm ARGB fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink fins towards the rear of the case.
7. Кабелдерди туташтыруу: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard or ARGB controller.

3. Операция

The ID-COOLING FROZN A410 ARGB White CPU Cooler is designed for optimal performance and aesthetics.

3.1. Fan Control (PWM)

The 120mm FDB fan is a Pulse Width Modulation (PWM) fan, allowing your motherboard to dynamically control its speed based on CPU temperature. This ensures efficient cooling when needed and quiet operation during lighter loads. You can configure fan curves through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer.

Сүрөт 2: Diagram illustrating the Fluid Dynamic Bearing (FDB) technology used in the fan, highlighting its benefits for longevity and quiet operation.

Сүрөт 3: Visual representation of the fan's performance metrics, including airflow (78 CFM), noise level (29.9 dB(A) Max), and air pressure (2.68mmH2O Max).

3.2. ARGB жарыкты башкаруу

The Addressable RGB (ARGB) lighting on the fan and top cover can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) or a dedicated ARGB controller (if connected). Ensure the ARGB cable is properly connected to a 3-pin 5V ARGB header.

Сүрөт 4: The FROZN A410 ARGB White CPU Cooler showcasing its vibrant ARGB lighting when installed in a white PC case.

4. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө CPU муздаткычыңыздын оптималдуу иштешин жана узак мөөнөттүү иштешин камсыз кылат.

• Чаңды тазалоо: Кысылган аба же жумшак щетка менен жылыткычтын сүзгүчтөрүнүн жана желдеткичтин пычактарынын чаңын мезгил-мезгили менен тазалап туруңуз. Тазалоо учурунда зыян келтирбөө үчүн желдеткич айланбагандыгын текшериңиз.
• Термикалык паста: Reapply thermal paste every 1-2 years, or if the cooler is removed and reinstalled. Ensure the CPU and heatsink surfaces are clean before applying new thermal paste.
• желдеткич текшерүү: Check fan cables for secure connections and ensure fan blades are free from obstructions.

5. Кыйынчылыктарды

If you encounter issues with your CPU cooler, refer to the following common solutions:

6. Техникалык шарттар

Сүрөт 5: Illustration of the 4 direct contact heatpipes, showing how they efficiently transfer heat from the CPU.

Сүрөт 6: Diagram highlighting the cooler's design for perfect memory compatibility, ensuring clearance for RAM modules.

Сүрөт 7: The ID-COOLING FROZN A410 ARGB White CPU Cooler, emphasizing its aesthetic appeal.

7. Кепилдик жана колдоо

For warranty information and technical support, please refer to the official ID-COOLING webсайтка же кардарларды тейлөөгө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Онлайн ресурстар: ID-COOLING Store on Amazon