Introduction
This manual provides essential information for the proper use and maintenance of SUNLU PLA 3D Printer Filament. PLA (Polylactic Acid) is a widely used thermoplastic material known for its ease of use, reliability, and versatility in FDM (Fused Deposition Modeling) 3D printing. This filament is designed to offer excellent layer adhesion, minimal warping, and consistent diameter for high-quality prints.
SUNLU PLA filament is suitable for a broad range of FDM 3D printers due to its precise dimensional accuracy of +/- 0.02mm and standard 1.75mm diameter. The filament is neatly wound to prevent tangles and jams, ensuring a smoother and more efficient printing experience.
Продукт өзгөчөлүктөрү
- Жогорку шайкештик: Designed for almost all 1.75mm FDM 3D printers.
- Өлчөмдүк тактык: +/- 0.02mm for consistent extrusion and print quality.
- Neatly Wound Spool: Reduces tangles and jams, ensuring smooth feeding.
- Excellent Layer Adhesion: Promotes strong and durable printed objects.
- Minimal Warping & Stringing: Contributes to cleaner and more precise prints.
- Экологиялык таза материал: Made from ultra-pure PLA raw materials derived from corn extract, non-toxic.
Figure 1: Key properties of SUNLU PLA Filament, highlighting its advantages 3D басып чыгаруу үчүн.
Figure 2: Illustration of PLA raw materials derived from corn extract, emphasizing its non-toxic composition.
Setup and Spool Assembly
The SUNLU PLA filament may come with a reusable spool design, allowing you to replace the filament core while retaining the outer spool. This section details how to assemble the refill filament onto the reusable spool.
Assembling the Reusable Spool
- Separate the Spool Sides: Gently pull apart the two halves of the reusable spool.
- Prepare New Refill: Unpack the new refill filament. Do NOT remove the plastic straps that hold the filament neatly wound until instructed.
- Load Refill Filament: Align the refill filament with the central hub of one spool half. Ensure the small triangular mark on the filament core aligns with the corresponding mark on the spool half.
- Combine Spool Halves: Place the second spool half over the filament, aligning its triangular mark with the filament and the first spool half. Press firmly to combine.
- Lock the Spool: Rotate one side of the spool towards the "lock" mark until it clicks securely into place.
- Remove Plastic Straps: Once the spool is securely assembled, carefully remove the plastic straps from the filament. Ensure the filament is pressed close to the spool to prevent any gaps.
Video 1: Step-by-step guide on assembling the SUNLU refill filament onto the reusable spool.
Figure 3: Visual instructions for assembling the SUNLU reusable filament spool.
Иштөө көрсөтмөлөрү
For optimal printing results with SUNLU PLA filament, adhere to the following recommended settings and practices:
| Орнотуу | Сунушталган диапазон |
|---|---|
| Сопло температурасы | 200-230°C |
| Төшөктүн температурасы | 50-65°C |
| Басып чыгаруу ылдамдыгы | 50-100мм/с |
Always perform a small test print or calibration cube when using new filament or adjusting settings to fine-tune for your specific 3D printer model.
4-сүрөт: Мисamples of objects that can be created using FDM 3D printing with SUNLU PLA filament.
Тейлөө жана сактоо
Proper maintenance and storage of your PLA filament are crucial for preserving its quality and ensuring consistent print results. PLA can absorb moisture from the air, which can lead to printing issues such as bubbling, stringing, and reduced print strength.
Сактоо боюнча сунуштар:
- Кургак кармоо: Store filament in a cool, dry place, away from direct sunlight and humidity.
- Аба өткөрбөгөн контейнер: After opening, store the filament in an airtight container or resealable bag with desiccant packets (silica gel) to absorb moisture.
- Оригиналдуу таңгак: If possible, keep the filament in its original vacuum-sealed packaging until ready for use.
- Чаташтырбоо: To prevent tangling, always insert the filament end into the side holes of the spool after each use.
Figure 5: A neatly wound spool, illustrating the design that helps prevent tangles and ensures smooth feeding.
Жалпы көйгөйлөрдү чечүү
While SUNLU PLA filament is designed for reliability, occasional printing issues may arise. Here are some common problems and their potential solutions:
| Маселе | Мүмкүн болгон себептер(дер) | Чечим(лер) |
|---|---|---|
| Clogging/Jams | Moisture absorption, incorrect temperature, tangled filament. | Dry filament (use a filament dryer), adjust nozzle temperature, ensure filament is neatly wound and not tangled. |
| Bubbles/Steam during printing | Moisture in filament. | Dry filament thoroughly before use. |
| Poor Layer Adhesion | Low nozzle temperature, incorrect bed temperature, dirty print surface. | Increase nozzle/bed temperature within recommended range, clean print bed, apply adhesive if necessary. |
| Катуу | Insufficient bed adhesion, drafts, incorrect bed temperature. | Ensure proper bed adhesion, use an enclosure, optimize bed temperature. |
| String | High nozzle temperature, incorrect retraction settings, wet filament. | Lower nozzle temperature, adjust retraction distance/speed, dry filament. |
| Filament breaking/brittle | Moisture absorption, old filament. | Dry filament, ensure proper storage. |
For persistent issues, consult your 3D printer's specific manual or contact SUNLU customer support.
Техникалык шарттар
- Материал: Полилактикалык кислота (PLA)
- Filament диаметри: 1.75мм
- Өлчөмдүк тактык: +/- 0.02мм
- Таза Салмагы: 1 кг (2.2 фунт)
- Spool Diameter: 8.00 дюйм (200мм)
- Spool Width: 2.50 дюйм (64мм)
- Spool Hub Hole Diameter: 2.20 дюйм (56мм)
- Recommended Nozzle Temperature: 200-230°C
- Recommended Bed Temperature: 50-65°C
- Recommended Printing Speed: 50-100мм/с
- Түсү: Skin Beige (for this specific variant)
Кепилдик жана колдоо
For any questions, technical assistance, or warranty inquiries regarding your SUNLU PLA 3D Printer Filament, please refer to the official SUNLU webсайтка же түздөн-түз кардарларды колдоо менен байланышыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
You can find more information and products from SUNLU at their official store: SUNLU Official Store on Amazon.
