Brendz LED Cabinet Light with Motion Sensor (Model: CL5001A)

Introduction

Thank you for choosing the Brendz LED Cabinet Light. This product is designed to provide versatile and convenient lighting for various indoor spaces such as cabinets, closets, hallways, and garages. Featuring a motion sensor, USB-C recharging, and adjustable color temperatures, it offers an efficient and adaptable lighting solution. Please read this manual thoroughly before use to ensure proper installation and operation.

Коопсуздук нускамалары

• Аппаратты сууга же ашыкча нымдуулукка дуушар кылбаңыз.
• Аппаратты өзүңүз ажыратпаңыз же оңдоого аракет кылбаңыз. Жардам алуу үчүн кардарларды колдоо бөлүмүнө кайрылыңыз.
• Keep away from high temperatures and direct sunlight.
• Заряддоо үчүн берилген USB-C кабелин гана колдонуңуз.
• This light is intended for indoor use only.
• The light is not designed to replace main lighting but for short-duration illumination in specific areas.

Пакеттин мазмуну

• 2 x Brendz Puyo LED Cabinet Lights (40cm, Silver)
• 2 x USB-C Charging Cables (25cm)
• Mounting Material (Metal plates with 3M adhesive)
• User Manual

Продукт бүттүview

The Brendz LED Cabinet Light features a sleek aluminum body, an integrated PIR motion sensor, and a multi-function button for control. It is designed for easy installation and flexible use.

1-сүрөт: Деталдаштырылган view of the light's features, including the USB-C charging port, LED charging indicator (red/green), and the ON-OFF-AUTO switch. The light has an ultra-thin 10mm aluminum body.

Орнотуу жана орнотуу

1. Аппаратты заряддоо

Before first use, fully charge the LED cabinet light. Connect the provided USB-C cable to the light's charging port and to a standard USB power adapter (not included). The charging indicator LED will illuminate red during charging and turn green when fully charged. A full charge takes approximately 6 hours.

2. Жарыкты орнотуу

The Brendz LED Cabinet Light features built-in magnets for easy installation. It comes with metal plates and 3M self-adhesive tape for mounting on non-magnetic surfaces.

1. Бетти даярдоо: Clean and dry the desired mounting surface to ensure optimal adhesion.
2. Металл плиталарды бекитүү: Peel off the protective film from the 3M adhesive on the metal plates. Firmly press the metal plates onto the cleaned surface at the desired location.
3. Жарыкты тоо: The light will magnetically attach to the installed metal plates. Ensure it is securely fastened.

2-сүрөт: Illustration of the easy installation process using the included metal plates and 3M self-adhesive tape, allowing the light to attach magnetically.

Иштөө нускамалары

The light features a multi-function button and a 3-position switch (ON-OFF-AUTO) for various operating modes.

3-сүрөт: The single control button allows for stepless dimming (long press) and changing color temperature (single press).

1. Power Modes (ON-OFF-AUTO Switch)

• КҮЙҮК: Жарык тынымсыз күйүп тура берет.
• ӨЧҮК: Жарык өчөт.
• АВТО: The light will activate when motion is detected in a dark environment. It will turn off automatically after 25 seconds if no further motion is detected.

4-сүрөт: The PIR motion sensor detects movement within a 120-degree angle up to 3 meters, activating the light in AUTO mode.

2. Түс температурасын жөндөө

With the light turned ON (either in ON mode or after activation in AUTO mode), press the control button once to cycle through the three available color temperatures:

• 6000K Муздак Ак
• 4000K нейтралдуу ак
• 3000K жылуу ак

5-сүрөт: The light offers three distinct color temperatures to suit different preferences and environments.

3. Кадамсыз караңгылатуу

To adjust the brightness, press and hold the control button. The light intensity will smoothly change between 10% (15 lumens) and 100% (150 lumens). Release the button when the desired brightness is reached. The light features a memory function that recalls the last brightness setting when turned on again.

6-сүрөт: The stepless dimming feature allows for precise brightness adjustment from 10% to 100% output.

Батарея жана заряддоо

The Brendz LED Cabinet Light is equipped with an integrated 1100 mAh polymer lithium battery, providing reliable performance.

• Заряддоо убактысы: Толук кубаттоо үчүн болжол менен 6 саат.
• Батареянын иштөө мөөнөтү: Up to 10 hours in continuous ON mode, or up to 1500 activations in AUTO (motion sensor) mode on a full charge.

7-сүрөт: Battery performance details, highlighting the long operational time and charging duration.

Техникалык тейлөө

• Тазалоо: Лампаны жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Сактагыч: If storing for an extended period, charge the battery fully every 3-6 months to maintain battery health.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

Brendz products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please refer to your purchase documentation or contact the retailer where the product was purchased. Please retain your proof of purchase for warranty purposes.