Ansmann 1001-0143

ANSMANN BC 6-12V/2A Smart Charger Instruction Manual

1. Киришүү

The ANSMANN BC 6-12V/2A Smart Charger is an intelligent, automatic 8-stage battery charger designed for safe and efficient charging of various 6V and 12V batteries. It is suitable for lead-acid, lead-gel, lead-fleece, and 12V LiFePO4 batteries with capacities ranging from 4 Ah to 60 Ah. This charger ensures optimal battery performance and extends battery life through its advanced charging process and comprehensive safety features.

Кутуга камтылган:

2. Орнотуу жана туташуу

Before connecting the charger, ensure the charger is unplugged from the mains power supply. Select the appropriate connection method for your battery: battery clamps for temporary connection or ring terminals for a more permanent installation.

Туташуу кадамдары:

  1. Connect the red positive (+) charger cable to the positive (+) terminal of the battery.
  2. Connect the black negative (-) charger cable to the negative (-) terminal of the battery.
  3. Бардык байланыштар коопсуз экенин текшериңиз.
  4. Plug the charger into a suitable mains power outlet. The charger will automatically begin its initial checks.
ANSMANN BC 6-12V/2A Smart Charger with battery clamps, ring terminals, and power cable

Figure 1: ANSMANN Smart Charger with included accessories for various connection types.

Person connecting the ANSMANN charger to a car battery

2-сүрөт: Мисample of connecting the charger to a car battery using battery clamps.

ANSMANN charger connected to a motorcycle battery

3-сүрөт: Мисample of connecting the charger to a motorcycle battery.

3. Иштөө нускамалары

The charger features an 8-stage fully automatic intelligent charging process. Use the 'MODE' button to select the appropriate charging program and current for your battery.

Selecting Charging Programs:

басыңыз РЕЖИМ жеткиликтүү кубаттоо программаларын карап чыгуу үчүн баскычты басыңыз:

For each program, you can select a charging current of either 1A or 2A. The LCD display will indicate the selected mode and charging status.

8-Сtage Automatic Charging Process:

The charger automatically progresses through the following stages to optimize battery charging and maintenance:

  1. Батареяны текшерүү: Assesses the battery's initial status and voltage.
  2. Десульфация: Applies pulsed current and voltage to break down sulfate crystals on lead plates, restoring battery capacity.
  3. Анализ: Temporarily halts charging to measure the battery's no-load voltage.
  4. Reactivation Charge: Prepares the battery for the main charge, resuming desulfation if necessary.
  5. Main Charge: Charges the battery with a constant current until it reaches a high state of charge.
  6. Charge Optimization: Gradually reduces the charging current to achieve maximum battery capacity.
  7. Тtage Control: Monitors the battery's charge status to ensure optimal voltage деңгээли.
  8. Holding Charge (Maintenance): Provides pulse maintenance charging as needed to prevent self-discharge and keep the battery fully charged.
Диаграмма 8-сtage charging process of the ANSMANN charger

4-сүрөт: 8-стердин визуалдык көрсөтүлүшүtagавтоматтык түрдө заряддоо процесси.

4. Техникалык тейлөө

The ANSMANN BC 6-12V/2A Smart Charger is designed for durability and minimal maintenance. It is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This allows for safe use in various environments.

The charger can remain connected to the battery for extended periods, providing a continuous holding charge to prevent self-discharge. This feature is ideal for vehicles stored for long durations, ensuring the battery remains fully charged and ready for use.

Periodically inspect the charger cables and connectors for any signs of damage or wear. Keep the charger clean and free from excessive dust or debris.

5. Troubleshooting and Safety Features

The ANSMANN Smart Charger incorporates multiple safety features to protect both the user and the battery during operation. If an issue occurs, the charger's LCD display may indicate an error or the charging process may not initiate.

Коопсуздук өзгөчөлүктөрү:

ANSMANN charger in a wet environment, illustrating protection features

Figure 5: The charger's robust design and protection features, including splash water resistance.

ANSMANN charger connected to various battery types, highlighting defect detection

Figure 6: The charger's universal compatibility and defect detection capability.

Жалпы маселелер жана чечимдер:

6. Техникалык шарттар

ӨзгөчөлүкСпецификация
Модель номери1001-0143
Киргизүү көлөмүtageAC 100-240V, 50/60Hz
Output Voltage6V / 12V (ТК)
Заряддоо агымы1A / 2A (selectable)
Батарея сыйымдуулугу4 Аа - 60 Аа
Батарея түрлөрүLead-Acid, Lead-Gel, Lead-Fleece, 12V LiFePO4
Заряддоо Сtages8-Сtage Автоматтык
Коргоо рейтингиIP65 (Dust and Splash Water Protected)
Продукциянын өлчөмдөрү7.09 x 3.11 x 1.93 дюйм (180 x 79 x 49 мм)
Элемент Салмагы1.03 фунт (0.47 кг)

7. Кепилдик

The ANSMANN BC 6-12V/2A Smart Charger comes with a 3 жылдык өндүрүүчүнүн кепилдиги from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, accidents, or normal wear and tear.

8. Колдоо

For further assistance, technical support, or warranty inquiries, please contact ANSMANN customer service. You can find contact information on the official ANSMANN webсайт же сатуучу аркылуу.

For more information about ANSMANN products, visit the Amazonдагы Ansmann дүкөнү.

Тектеш документтер - 1001-0143

Preview ANSMANN BC 6-12V / 6A Inteligentní nabíječka autobaterií Návod k obsluze
Návod k obsluze pro inteligentní nabíječku autobaterií ANSMANN BC 6-12V / 6A. Pokrývá nabíjecí программасы, 6V жана 12V жалындуу, AGM, 12V LiFePO4 батарейкалары үчүн техникалык өзгөчөлүктөрдү жана көйгөйлөрдү чечүү.
Preview Bedienungsanleitung ANSMANN POWERLINE 4 SMART Ladegerät
Umfassende Bedienungsanleitung für das intelligente ANSMANN POWERLINE 4 SMART Ladegerät zum Laden von NiMH- und NiCd-Akkus (AA/AAA). Enthält Informationen zu Funktionen, Sicherheit und technischer Spezifikation.
Preview Түзмөктөр: ANSMANN BC 6-12V / 10A Intelligentes Autobatterieladegerät
Umfassende Bedienungsanleitung für das ANSMANN BC 6-12V / 10A intelligente Autobatterieladegerät. Erfahren Sie mehr über die Funktionen, Sicherheitshinweise жана Ladeprogramme für 6V и 12V Batterien.
Preview Ansmann Home Charger HC120PD Колдонуучунун колдонмосу
Ansmann Home Charger HC120PD үчүн колдонуучу колдонмосу, стандарттуу USB интерфейси бар түзмөктөрдү иштетүү үчүн иштелип чыккан USB-C PD заряддагыч. Коопсуздук нускамаларын, эксплуатация боюнча көрсөтмөлөрдү, техникалык мүнөздөмөлөрдү жана утилдештирүү маалыматын берет.
Preview ANSMANN Energy Check LCD Battery Tester - Operation Manual
Comprehensive operation manual for the ANSMANN Energy Check LCD battery tester. Learn how to test various battery types, interpret results, troubleshoot issues, and understand safety and disposal guidelines.
Preview ANSMANN BTS-MINI Bluetooth Speaker Колдонуучунун колдонмосу
ANSMANN BTS-MINI портативдүү Bluetooth динамиги үчүн колдонуучунун колдонмосу, чоо-жайы, функциялары, коопсуздук көрсөтмөлөрү, IPX7 суу өткөрбөйт рейтинги жана утилизациялоо маалыматы.