BrosTrend AX1800 M.2 WiFi 6 жана Bluetooth 5.2 айкалышкан картасынын колдонуучу колдонмосу

Introduction

This manual provides comprehensive instructions for the installation, setup, and operation of your BrosTrend AX1800 M.2 WiFi 6 and Bluetooth 5.2 Combo Card. This internal computer networking card is designed to enhance your laptop's wireless capabilities, offering high-speed WiFi 6 connectivity and advanced Bluetooth 5.2 features.

Image: The BrosTrend AX1800 M.2 WiFi 6 and Bluetooth 5.2 Combo Card, a compact internal network adapter.

Пакеттин мазмуну

Пакетиңизде төмөнкү заттар бар экенин текшериңиз:

• 1 x M.2 WiFi 6 / Bluetooth Combo Card
• 1 x Ыкчам орнотуу колдонмосу
• 2 x Screws (one spare)
• 1 x Screwdriver

Image: A visual representation of the BrosTrend AX1800 M.2 WiFi 6 / Bluetooth Combo Card, quick installation guide, two screws, and a screwdriver included in the package.

Жайгашуу

1. Driver Installation (Pre-installation)

It is recommended to download and install the necessary drivers before physically installing the M.2 card. This ensures your system recognizes the new hardware immediately upon boot-up.

1. Visit the official BrosTrend webсайт: www.brostrend.com.
2. Navigate to the support or download section for the AX1800 M.2 WiFi 6 / Bluetooth Combo Card.
3. Download the latest WiFi and Bluetooth drivers compatible with your operating system (Windows 10/11).
4. Жүктөлүп алынган .zip файлын чыгарып алыңыз files and run the setup.exe for both WiFi and Bluetooth drivers.
5. After successful driver installation, shut down your laptop completely before proceeding with physical installation.

Image: A laptop screen displaying the BrosTrend website, highlighting the section for downloading drivers for the M.2 WiFi 6 / Bluetooth Combo Card.

2. Физикалык орнотуу

Follow these steps to physically install the M.2 WiFi 6 and Bluetooth Combo Card into your laptop:

1. Ноутбугуңузду даярдаңыз: Ensure your laptop is completely powered off and disconnected from any power source. Remove the base cover of your laptop to access the internal components.
2. M.2 уячасын табыңыз: Identify the M.2 slot on your laptop's motherboard. If an existing M.2 network card is present, you will need to remove it.
3. Remove Existing Card (if any):
   • Carefully disconnect the antenna cables from the existing network card.
   • Unscrew the retaining screw that secures the card to the motherboard.
   • Gently slide and lift the existing network card out of the M.2 slot.
4. Жаңы картаны орнотуу:
   • Align the BrosTrend AX1800 M.2 WiFi 6 / Bluetooth Combo Card with the M.2 slot. The card is NGFF M.2 2230 form factor, compatible with Key A and Key E slots.
   • Gently slide the new card into the slot until it is fully seated.
   • Secure the card with the provided screw.
   • Reconnect the antenna cables to the new network card. The MHF4 / IPEX4 connectors allow flexible connection to either antenna port.
5. Ноутбукту кайра чогултуу: Carefully replace the base cover of your laptop and secure it with all screws.
6. Күйгүзүү: Connect your laptop to power and turn it on.

Image: The BrosTrend AX1800 M.2 WiFi 6 card shown installed within a laptop, illustrating its compact size and placement.

Image: A close-up of the BrosTrend M.2 WiFi 6 card, detailing its NGFF M.2 2230 form factor and compatibility with Key A and Key E slots.

Image: The MHF4 / IPEX4 antenna connectors on the BrosTrend WiFi card, designed for connecting existing laptop antennas.

Иштөө нускамалары

1. Connecting to a WiFi Network

After successful installation and driver setup, your laptop should detect available WiFi networks.

1. Click the network icon on your taskbar (usually located in the bottom-right corner).
2. Select the desired WiFi network from the list.
3. "Байланыш" баскычын басыңыз.
4. Enter the WiFi password when prompted and click "Next".
5. After a short while, the network status will change to "Connected".

Image: A person engaged in a video call on a laptop, demonstrating the smooth connectivity provided by the BrosTrend WiFi card.

2. Bluetooth Жупташтыруу

The BrosTrend AX1800 card supports Bluetooth 5.2, offering faster speeds and broader range compared to older standards. To pair a Bluetooth device:

1. Ensure Bluetooth is enabled on your laptop (check Windows Settings > Devices > Bluetooth & other devices).
2. Bluetooth түзмөгүңүздү жупташтыруу режимине коюңуз.
3. On your laptop, click "Add Bluetooth or other device" and select "Bluetooth".
4. Жупташтырууну аяктоо үчүн тизмеден түзмөгүңүздү тандап, экрандагы көрсөтмөлөрдү аткарыңыз.

Image: An illustration showing a laptop wirelessly connected to multiple Bluetooth 5.2 devices such as a mouse, earphones, speaker, keyboard, smartphone, tablet, printer, and game controller.

Техникалык тейлөө

To ensure optimal performance and security, regularly check for and install the latest drivers for your BrosTrend AX1800 M.2 WiFi 6 and Bluetooth 5.2 Combo Card. Drivers can be found on the official BrosTrend webсайт.

Keep your laptop's internal components clean from dust to prevent overheating, which can affect network card performance.

Проблемаларды чечүү

• No WiFi or Bluetooth after installation:
  • Ensure drivers are correctly installed. Re-download and install if necessary.
  • Verify the card is properly seated in the M.2 slot and the retaining screw is secure.
  • Check that antenna cables are securely connected to the card.
  • Confirm your laptop's BIOS/UEFI settings do not disable the M.2 slot or wireless functionality.
• Slow WiFi speeds:
  • Ensure you are connected to a WiFi 6 compatible router.
  • Башка түзмөктөрдөн же тармактардан келген тоскоолдуктарды текшериңиз.
  • Роутериңиздин микропрограммасын жаңыртыңыз.
  • Verify that your laptop's power settings are not limiting wireless adapter performance.
• Bluetooth түзмөгү жупташкан жок:
  • Ensure the Bluetooth device is in pairing mode and within range.
  • Check if other Bluetooth devices are interfering.
  • Restart both your laptop and the Bluetooth device.

Техникалык шарттар

Image: A person using a laptop, illustrating the benefits of WiFi 6 technologies like UL/DL MU-MIMO, OFDMA, and 1024-QAM for low-latency connections.

Image: A close-up of the Realtek chip, emphasizing its role in boosting WiFi and Bluetooth performance and ensuring universal compatibility.

Image: An illustration depicting WPA3, the latest security protocol, providing enhanced protection for personal data and public networks.

Image: A diagram illustrating how TWT (Target Wake Time) technology helps extend laptop battery life by optimizing data transmissions with the WiFi router.

Кепилдик

The BrosTrend AX1800 M.2 WiFi 6 and Bluetooth 5.2 Combo Card comes with a Lifetime Protection. For detailed warranty terms and conditions, please refer to the official BrosTrend webсайтка же кардарларды колдоо менен байланышыңыз.

Колдоо

For further assistance, technical support, or to download the latest drivers and firmware, please visit the official BrosTrend webсайт:

www.brostrend.com

You can also find FAQs and additional resources on their support pages.