Introduction
Thank you for choosing the ErGear Dual Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and keep it for future reference.
Маанилүү коопсуздук маалыматы
Please ensure all instructions are read and understood before assembly and use. If you have any questions, please contact customer service. Failure to follow these instructions may result in property damage, serious injury, or death.
- Verify that your monitor's weight and VESA pattern are within the specified limits.
- Do not exceed the maximum load capacity of 26.5 lbs per arm.
- Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and monitors.
- Берилген жабдыктарды гана колдонуңуз.
- кичинекей бөлүктөрүн балдардан алыс кармаңыз.
Техникалык шарттар
- Модел: EGCM13B
- Экрандын өлчөмү шайкештиги: 13ден 34 дюймга чейин
- Weight Capacity (per arm): 26.5 фунтка чейин
- VESA шайкештиги: 75x75 мм, 100x100 мм
- Arm Span: 33 дюйм
- Уюлдун бийиктиги: 16.3 дюйм
- Кыймыл түрү: Tilt, Swivel, Rotation, Articulating
- Максималдуу кыйшаюу бурчу: 90 градус
- Материал: Эритме болот
- Түсү: Кара
- Монтаж түрү: Столдун үстү (C-Clamp же Громмет)
- C-Clamp Үстөлдүн калыңдыгы: 0.39" - 3.15"
- Grommet Mount Desk Thickness: 0.39" - 2.17"
- Громмет тешигинин диаметри: 0.47" - 0.79"
Пакеттин мазмуну
Please check that all parts are included and undamaged. If any parts are missing or damaged, please contact customer service.
- Үстөлү бар негизги мамыamp/Grommet Base
- Кош монитор куралы
- VESA плиталары (2x)
- Орнотуу жабдуулары (бурамалар, шайбалар, шаймандар)
- Кабелдик башкаруу клиптери
- Instruction Manual
Орнотуу жана орнотуу
1. Desk Compatibility Check
Before installation, ensure your desk meets the following criteria:
- Материал: Жыгачтан жасалган столдор үчүн сунушталат.
- Асты: Preferably free of beams or panels that may interfere with installation.
- C-Clamp Калыңдыгы: 0.39" - 3.15"
- Grommet Mount Thickness: 0.39" - 2.17" (Hole Diameter: 0.47" - 0.79")
2. Monitor Compatibility Check
Each monitor must meet these conditions:
- Экрандын өлчөмү: 13ден 34 дюймга чейин
- Салмагы: 26.5 фунтка чейин
- VESA монтаждоо тешиктери: 75x75 mm or 100x100 mm apart on the back of the monitor.
3. Assemble the Pole with Clamp Колдоо
Choose either C-Clamp or Grommet installation based on your desk type.
Follow the detailed steps in the provided video and diagrams to securely attach the main pole to your desk using either the C-Clamp or Grommet method. Ensure all screws are tightened appropriately for stability.
4. Assemble the Arm and Pole Wire Clips
Attach the monitor arms to the main pole. Loosen the screw on the pipe clamp before installing the arm, then tighten it securely. Ensure the VESA plate side of the arm faces upwards. Install the cable management clips along the arms and pole.
5. Assemble VESA Plate and Monitor
Attach the VESA plate to the back of your monitor using the appropriate screws and washers. Ensure it is securely fastened.
6. Install the Monitor to the Swivel Arm
Carefully slide the monitor (with the attached VESA plate) onto the swivel arm. Secure it by tightening the locking screw. Adjust the screw with the Allen key to adjust the height of the VESA panel as needed (clockwise to lower, counter-clockwise to raise).
Иштөө жана тууралоо
The ErGear Dual Monitor Desk Mount offers versatile adjustments for optimal viewсооронуч:
- Бийиктигин тууралоо: Клamp on the main pole to slide the arms up or down to your desired height. Re-tighten the clamp коопсуз.
- Россия: Adjust the monitor's vertical angle by tilting it +/-45 degrees to reduce glare and eye strain.
- Айлануучу: Rotate the monitor horizontally +/-90 degrees for easy screen sharing or viewар кандай бурчтардан.
- Айлануу: Пейзаж жана портрет багыттарын которуу үчүн мониторду 360 градуска буруңуз.
- Arm Extension/Retraction: The articulating arms allow you to extend or retract your monitors closer or further from you. Adjust the tension screws on the arm joints as needed to hold the desired position.
Техникалык тейлөө
- Мезгил-мезгили менен бардык бурамалар менен байланыштарды текшерип туруңуз, алар бекем жана бекем бойдон калууда.
- Орноткучту жумшак, d менен тазалаңызamp кездеме. Абразивдүү тазалагычтардан алыс болуңуз.
- Do not disassemble the mount unless instructed to do so.
Проблемаларды чечүү
- Мониторлор тегиз эмес: Ensure the VESA plates are correctly aligned and tightened. Adjust the small bolts on the tilt head to fine-tune alignment.
- Monitors sag or do not hold position: Tighten the tension screws on the arm joints. Refer to the assembly instructions for specific locations.
- Тоо туруксуз сезилет: Double-check that the C-Clamp or Grommet mount is securely fastened to the desk and all screws are fully tightened. Ensure your desk meets the thickness requirements.
Кепилдик жана колдоо
For warranty information or technical support, please refer to the product packaging or contact ErGear customer service directly. Keep your purchase receipt as proof of purchase.
