Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BWE Black Sensor Faucet. This touchless commercial automatic motion hands-free faucet is designed for use in bathrooms and kitchens, featuring a control box and temperature mixer, suitable for both 1-hole or 3-hole installations. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your faucet.
Figure 1: BWE Black Sensor Faucet with deck plate.
Коопсуздук маалыматы
- Ар кандай орнотууну же тейлөөнү баштоодон мурун ар дайым негизги суу менен камсыздоону өчүрүңүз.
- Суу агып кетпеши үчүн бардык туташуулардын коопсуз экенин текшериңиз.
- Крандын бетине абразивдүү тазалагычтарды же катуу химиялык заттарды колдонбоңуз.
- The sensor is powered by 4 AA batteries (not included). Ensure correct battery polarity when inserting.
- If the sensor light flashes continuously, replace the batteries promptly.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- Black Automatic Bathroom Faucet
- Палуба плитасы (1 же 3 тешиктүү раковиналар үчүн)
- Control Box
- Temperature Mixer
- Hot and Cold Water Supply Hoses (2 pcs, American standard)
- Installation Hardware (gaskets, nuts, screws)
- Көрсөтмө (бул документ)
Figure 2: ашыкview of all included components for the faucet system.
Орнотуу жана орнотуу
The BWE Black Sensor Faucet is designed for easy installation, suitable for both single-hole and three-hole sink configurations using the included deck plate. While installation is straightforward, careful attention to detail is required for secure and leak-free operation.
Керектүү куралдар (камтылган эмес):
- Жөнгө салынуучу ачкыч
- Screwdriver
- Сантехниктин шпатлевы же силикон герметиги
- Өлчөө лентасы
- Flashlight (for under-sink work)
Орнотуу кадамдары:
- Раковинаны даярдаңыз: Ensure the sink surface is clean and dry. If installing on a 3-hole sink, place the deck plate over the holes. For a 1-hole sink, the deck plate is optional.
- Кранды орнотуу: Insert the faucet body through the hole(s) in the sink/deck plate. From underneath the sink, secure the faucet using the provided mounting hardware (gaskets, washers, and nuts). Tighten firmly but do not overtighten.
- Суу менен камсыздоо түтүктөрүн туташтыруу: Attach the hot and cold water supply hoses to the corresponding inlets on the faucet body. The hoses are typically color-coded (red for hot, blue for cold) or marked. Ensure a tight seal to prevent leaks. Connect the other end of the hoses to your hot and cold water supply valves.
- Башкаруу кутучасын орнотуу: Mount the control box in an accessible location under the sink, away from direct water exposure. Connect the sensor cable from the faucet to the control box.
- Батареяларды салыңыз: Open the battery compartment on the control box and insert 4 AA batteries (not included), ensuring correct polarity. Close the compartment securely.
- Сыноо операциясы: Turn on the main water supply. Place your hands under the faucet to activate the sensor. Check for any leaks around the connections. Adjust the temperature using the small handle on the side of the faucet body.
Figure 3: Key components for installation: faucet base connection, battery box, and power adapter.
Операция
Touchless Sensing:
The faucet is equipped with a built-in infrared sensor. To activate water flow, simply place your hands within the sensing area directly under the spout. The water will automatically turn on. When you remove your hands, the water flow will stop, minimizing water waste and cross-contamination.
Figure 4: Demonstrating the touchless activation of the faucet.
Суунун температурасын жөндөө:
The faucet includes a small handle on the side of the faucet body for temperature control. Rotate the handle to the left for hotter water and to the right for colder water. This allows you to set your desired water temperature before activating the flow with the sensor.
Figure 5: The adjustable switch for hot and cold water mixing.
Техникалык тейлөө
Тазалоо:
To maintain the matte black finish and ensure optimal performance, clean the faucet regularly with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish and internal components.
Батареяны алмаштыруу:
The sensor is powered by 4 AA batteries located in the control box. When the sensor light on the faucet begins to flash continuously, it indicates that the battery power is low and they need to be replaced. To replace, open the battery compartment on the control box, remove the old batteries, and insert new ones, ensuring correct polarity. Securely close the compartment.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| No water flow or weak flow. |
|
|
| Sensor light flashing continuously. | Батареянын кубаттуулугу төмөн. | Replace 4 AA batteries in the control box. |
| Water does not turn off. |
|
|
| Байланыштардан агып чыгуулар. | Бошоң байланыштар же бузулган прокладкалар. | Turn off water supply. Check and tighten all connections. Replace gaskets if damaged. |
| Sensor sensitivity issues (e.g., too close to activate). | Sensor calibration or environmental factors. | Ensure the sensor is clean and unobstructed. If a remote for adjustment is mentioned in other documentation, consult that. Otherwise, contact customer support for advanced calibration options. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | BWE |
| Модель аты | 18114-Black (Sensor Faucet) |
| Сунушталган Колдонуулар | Ванна |
| Монтаж түрү | Deck Mount |
| Аяктоо түрү | Matte Black |
| Материал | Жез |
| Тешиктердин санына шайкештик | 1 (3 тешиктүү палуба үчүн кошумча палуба плитасы менен) |
| Өзгөчөлүктөр | Easy to Install, Touchless, Water Saving System |
| Handle Type | Сенсор |
| Орнотуу түрү | Single Hole |
| Клапан түрү | Картридж клапаны |
| Шлангдын узундугу | 15.75 дюйм |
| Power Source | Electric (4 AA Batteries, not included) |
| Продукциянын өлчөмдөрү | 10"D x 2"W x 2.69"H |
| Элемент Салмагы | 3.98 фунт |
Figure 6: Detailed dimensions of the BWE Black Sensor Faucet.
Кепилдик жана колдоо
For any questions regarding your BWE Black Sensor Faucet, including installation, operation, or troubleshooting not covered in this manual, please contact BWE customer support. You can typically find contact information on the product packaging or the official BWE website. Please have your model name (Sensor Faucet, 18114-Black) and purchase details ready when contacting support.
The product comes with a standard return policy of 30 days for refund/replacement. For extended protection, consider available protection plans.
Note: Information regarding specific warranty periods or detailed contact methods should be verified through official BWE channels or your purchase documentation.
