Introduction
The EASYPIX BirdyCam is an innovative bird feeder equipped with an integrated camera system, designed to observe birds and other small animals in your garden without disturbance. Featuring automatic motion detection and solar power, it captures high-definition photos and videos, providing unique insights into local wildlife. This manual will guide you through the setup, operation, and maintenance of your BirdyCam.
Коопсуздук маалыматы
Көңүл буруңуз: Install and handle the BirdyCam with care. To ensure the well-being of wildlife, do not use food that could be harmful to them. Always follow these instructions for safe installation and operation, and comply with any local regulations regarding bird feeding.
Пакеттин мазмуну
Before beginning, please verify that all components are present in your package:
- Bird Feeder with Integrated Camera
- Mounting Supports (e.g., strap, pole mount, mount adaptor)
- USB кабели
- Water Sink attachment
- Nectar Feeder attachment
- Колдонуучунун Колдонмосу (бул документ)
Image: All components included with the EASYPIX BirdyCam.
Жайгашуу
- Батареяны заряддоо: The BirdyCam features a built-in lithium battery and a double solar panel for continuous power. For initial use or after prolonged storage, it is recommended to fully charge the device via the provided USB cable. Connect the USB cable to the camera's port and a suitable power source.
- SD картаны салыңыз: Locate the SD card slot (typically near the camera controls). Insert a compatible SD card (not included) for storing photos and videos. Ensure it is inserted correctly until it clicks into place.
- Монтаждоо: Choose a suitable location in your garden, ensuring good sunlight exposure for the solar panels and a clear view of the area you wish to monitor. Use the provided mounting supports (strap, pole mount, or mount adaptor) to securely attach the BirdyCam. Ensure it is stable and out of reach of potential predators.
- Fill with Food and Water: Open the feeder compartments. Fill the main compartment with appropriate birdseed. Attach the water sink and nectar feeder if desired, and fill them with fresh water or nectar solution.
Сүрөт: алдыңкы view of the BirdyCam, highlighting food and water sections.
Image: The BirdyCam connected for USB charging.
Иштөө нускамалары
The BirdyCam is designed for automatic operation. Once set up, it will detect motion and capture media.
- Автоматтык кыймылды аныктоо: The device is equipped with a high-sensitivity PIR sensor that detects movement within a 3-meter radius. When motion is detected, the camera triggers automatically.
- Ишти баштоо убактысы: The camera has a rapid trigger time of approximately 0.8 seconds, ensuring that fast-moving subjects are captured effectively.
- Видео жана сүрөт режимдери: The BirdyCam can record HD video and take photos up to 12 MP resolution. You can typically configure the capture mode (photo, video, or photo+video) through the device's internal menu, accessible via the 1.44-inch (3.6 cm) display.
- Viewмаалымат каражаттары: Captured photos and videos are stored on the inserted SD card. To view them, you can either connect the BirdyCam to a computer using the USB cable or remove the SD card and insert it into a card reader.
Image: Key features of the BirdyCam, including detection range and media capabilities.
Сүрөт: Мисamples of wildlife captured by the BirdyCam camera.
Image: Accessing recorded media via SD card or USB connection to a computer.
Техникалык тейлөө
- Cleaning the Feeder: Regularly clean the food and water compartments to prevent mold and bacterial growth, which can be harmful to birds. Use mild soap and water, rinse thoroughly, and ensure it is completely dry before refilling.
- Күн панелдерин тазалоо: Keep the solar panels clean and free of dirt, dust, and debris to ensure optimal charging efficiency. Gently wipe them with a soft, damp кездеме.
- Батареяга кам көрүү: While the solar panels provide continuous power, during prolonged periods of bad weather or low sunlight, the integrated lithium battery may require recharging via the USB cable.
- Камера линзасы: Periodically check and clean the camera lens to ensure clear image and video quality. Use a soft, lint-free cloth designed for optics.
Image: Steps for refilling the BirdyCam with food and water.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Camera not recording or taking photos. | SD card full or not inserted correctly; low battery; motion sensor obstructed or faulty. | Check SD card, format if necessary, or replace. Charge battery via USB. Ensure clear line of sight for PIR sensor. |
| Сүрөт/видео сапаты начар. | Dirty lens; insufficient light; camera settings. | Clean the camera lens. Ensure adequate lighting. Check camera settings via the display. |
| Батарея заряддалбай жатат. | Solar panels dirty or obstructed; insufficient sunlight; faulty USB cable/port. | Clean solar panels. Relocate to an area with more direct sunlight. Try charging with a different USB cable or port. |
| Camera triggers too frequently without animals. | PIR sensor sensitivity too high; moving foliage or objects in detection zone. | Adjust PIR sensor sensitivity settings if available. Clear any moving branches or objects from the immediate detection area. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | 10123 |
| Өлчөмдөрү (L x W x Y) | 10.5 x 11 x 17.3 см |
| Салмагы | 350 грамм |
| Power Source | Solar powered (Double Solar Panel) |
| Батарея | 1 Литий-ион (кошулган) |
| Кыймылды аныктоо диапазону | 3 метрге чейин |
| Trigger убакыт | 0.8 секунд |
| Video Resolution | HD Video |
| Сүрөттүн резолюциясы | 12 МП чейин |
| Дисплей | 1.44 дюйм (3.6 см) |
| Өзгөчө өзгөчөлүк | Аба ырайына чыдамдуу |
| Монтаж түрү | Токтотулган монтаж |
| Максаттуу түрлөр | Bird |
Image: Dimensions of the BirdyCam feeder.
