NOYAFA NF-8509 Network Cable Tester and Multimeter User Manual

1. Продукт бүтүп калдыview

The NOYAFA NF-8509 is a versatile testing instrument combining the functionalities of a network cable tester and a digital multimeter. It is designed for professionals and enthusiasts to perform various network and electrical measurements efficiently.

Image 1.1: The NOYAFA NF-8509 device, showcasing its main unit and receiver, along with test leads.

Негизги өзгөчөлүктөрү:

• Network Cable Testing: Includes POE tester, RJ45/RJ11 CAT5/CAT6 cable testing, continuity testing, port flashing, and anti-jamming wire tracing.
• Мультиметрдин функциялары: Чаралар AC/DC тtage, AC/DC current, resistance, continuity, diode, and temperature.
• Time Domain Reflectometry (TDR): Measures cable length from 5 to 200 meters and calibrates Velocity of Propagation (VoP) values.
• POE Tester: Identifies standard PoE device information such as voltage, power supply polarity, power supply mode, and PSE type (af or at standard).
• Жаркылдаган порт: Automatically detects and switches between 10M/100M/1000M modes to locate network ports by flashing the port light on hubs and switches.
• NCV (контактсыз томtagд) аныктоо: Provides non-contact AC signal detection with an alarm for safety.
• Anti-Burnout Protection: Intelligent protection against incorrect operation up to 250V.

2. Аппараттын компоненттери

The NF-8509 consists of a main transmitter unit and a receiver unit. Familiarize yourself with the components before operation.

Image 2.1: Diagram illustrating the various buttons, ports, and display elements on both the transmitter and receiver units of the NF-8509.

Өткөргүч бирдиги:

• Дисплей экраны: Shows measurement results, battery level, and function indicators.
• Multimeter Probe Sockets: For connecting test leads for electrical measurements.
• RJ45/RJ11 порттору: For network and telephone cable testing.
• Функция баскычтары: For selecting modes (SCAN, CONT, Flash, Length, POE), holding readings, and switching multimeter functions.
• Type-C интерфейси: Аппаратты заряддоо үчүн.

Алуучу бирдиги:

• Signal Probe: Used for tracing cables.
• Кубат баскычы: To turn the receiver on/off.
• Сезимталдыкты жөндөө: Dial to adjust the sensitivity of the wire tracing function.
• Режимди которуу баскычы: Toggles between Analog and Digital scanning modes.
• Кол чырак: For illumination in dark environments.
• 3.5 мм гарнитура уячасы: For private listening during wire tracing.

3. Орнотуу жана алгачкы колдонуу

Before using the NF-8509, ensure it is properly set up.

3.1 Аппаратты заряддоо

• Connect the provided USB Type-C cable to the Type-C interface on the transmitter unit and to a standard USB power adapter (not included).
• The battery indicator on the display will show charging status. Ensure the device is fully charged for optimal performance.

3.2 Күйгүзүү/өчүрүү

• Өткөргүч: Press and hold the power button (usually the central button) until the screen illuminates. Press and hold again to power off.
• Алуучу: Rotate the power/scan dial clockwise to turn on. Rotate counter-clockwise to turn off.

3.3 Connecting Test Leads (for Multimeter Functions)

• Кызыл сыноо өткөргүчтү "VΩHz" киргизүү уячасына салыңыз.
• Insert the black test lead into the 'COM' input jack.
• For current measurements, insert the red test lead into the '5A' input jack.

4. Иштөө нускамалары

This section details the various functions of the NOYAFA NF-8509.

4.1 Network Cable Testing

Image 4.1: The NF-8509 display showing a network cable continuity test, indicating wire mapping.

4.1.1 Wire Map (Continuity) Test

1. Connect one end of the RJ45 or RJ11 cable to the corresponding port on the transmitter unit.
2. Connect the other end of the cable to the remote unit (if testing a long cable run) or directly to the receiver's RJ45 port for a direct test.
3. On the transmitter, select the 'CONT' mode.
4. The display will show the wire map, indicating continuity for each pin. Any breaks or miswires will be clearly displayed.

4.1.2 Cable Length Measurement (TDR)

Image 4.2: The NF-8509 in use, demonstrating its Time Domain Reflectometry (TDR) technology for precision cable length measurement.

1. Ensure the cable to be measured is disconnected from all network devices.
2. Connect one end of the cable to the RJ45 port on the transmitter unit.
3. Select the 'Length' mode on the transmitter.
4. The device will display the estimated length of the cable. The Velocity of Propagation (VoP) can be calibrated for improved accuracy.

4.1.3 Port Flashing

Image 4.3: The NF-8509 connected to a network switch, illustrating the port flashing function to identify the connected port, alongside a cable length measurement display.

1. Connect the RJ45 cable from the transmitter unit to a port on a network switch or hub.
2. Select the 'Flash' mode on the transmitter.
3. The corresponding port light on the connected network device will flash, allowing for easy identification of the cable's termination point.

4.1.4 Wire Tracing (SCAN Mode)

1. Connect the cable to be traced to the RJ45 port on the transmitter unit.
2. Select the 'SCAN' mode on the transmitter.
3. Turn on the receiver unit and adjust its sensitivity.
4. Use the receiver's probe to scan along the cable path. The receiver will emit an audible tone when it detects the signal from the transmitter, helping to locate the specific cable within a bundle.
5. Switch between Analog and Digital modes on the receiver for different tracing environments and interference levels.

4.1.5 POE тестирлөөсү

Image 4.4: The NF-8509 transmitter unit displaying POE test results, indicating power over Ethernet detection.

1. Connect the RJ45 cable from a PoE-enabled port to the RJ45 port on the transmitter unit.
2. Select the 'POE' mode on the transmitter.
3. The device will display information about the PoE connection, including voltage, power supply polarity, power mode, and the type of Power Sourcing Equipment (PSE) (e.g., 802.3af or 802.3at).

4.2 Мультиметрдин функциялары

Image 4.5: A collage of the NF-8509 display showing different autoranging functional measurements, including AC/DC voltage, resistance, AC/DC current, and buzzer continuity tests.

Ensure test leads are correctly connected to the 'VΩHz' and 'COM' jacks for most measurements, and '5A' for current measurements.

4.2.1 AC/DC Voltage Өлчөө

1. Тийиштүү томду тандаңызtage mode (AC V or DC V) using the function switch button.
2. Connect the test leads across the circuit or component to measure voltage.
3. Дисплейде том көрсөтүлөтtage окуу.

4.2.2 AC/DC Ток өлчөө

1. Ensure the red test lead is in the '5A' jack and the black lead in 'COM'.
2. Select the appropriate current mode (AC A or DC A).
3. Break the circuit and connect the test leads in series with the component to measure current.
4. Дисплей учурдагы окууну көрсөтөт.

4.2.3 Каршылыкты өлчөө

1. Select the resistance mode (Ω).
2. Ensure the circuit is de-energized. Connect the test leads across the component to measure resistance.
3. Дисплей каршылыктын маанисин көрсөтөт.

4.2.4 Үзгүлтүксүздүк тести (бышылдоочу)

1. Select the continuity mode (usually indicated by a buzzer icon).
2. Сынамык өткөргүчтөрдү чынжыр же компонент боюнча туташтырыңыз.
3. If continuity exists (low resistance), the device will emit an audible beep.

4.2.5 Диоддун сыноосу

1. Select the diode test mode (usually indicated by a diode symbol).
2. Connect the test leads across the diode.
3. Дисплей алдыга томду көрсөтөтtagтүшүп калсын. Ажыраган чынжырды текшерүү үчүн зымдарды оодарыңыз.

4.2.6 NCV (контактсыз томtagд) аныктоо

Image 4.6: The NF-8509 performing NCV (Non-Contact Voltage) detection, showing the device detecting an AC signal near a wall outlet.

1. NCV режимин тандаңыз.
2. Bring the top part of the transmitter unit (where the NCV sensor is located) close to an AC voltage source (e.g., live wire, electrical outlet).
3. The device will emit an alarm and indicate the presence of AC voltagд түз байланышсыз.

4.2.7 Температураны өлчөө

If your model includes a temperature probe (not always standard), connect it to the appropriate input jacks and select the temperature mode (°C/°F) to measure temperature.

5. Техникалык тейлөө

Proper maintenance ensures the longevity and accuracy of your NF-8509.

5.1 Тазалоо

• Аппаратты жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Ensure no moisture enters the ports or openings.

5.2 Сактоо

• Аппаратты түз күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Эгерде сиз аны көпкө сактасаңыз, анда анын иштөө мөөнөтүн узартуу үчүн батарейканын жарым-жартылай заряддалганын (болжол менен 50%) текшериңиз.

5.3 Батареяга кам көрүү

• Батарея индикатору аз кубаттуулукту көрсөткөндө аппаратты кайра заряддаңыз.
• Батареяны бат-баттан толук түгөтүп коюудан алыс болуңуз.

6. Кыйынчылыктарды

If you encounter issues with your NF-8509, refer to the following common troubleshooting steps.

• Түзмөк күйбөйт: Check battery level and ensure it is charged. If using test leads, ensure they are correctly inserted.
• Туура эмес өлчөөлөр: Ensure proper connection of cables/test leads. Verify the correct mode is selected for the measurement. Calibrate TDR VoP if cable length measurements are inconsistent.
• Wire tracing signal is weak or noisy: Adjust the sensitivity dial on the receiver. Ensure the transmitter is in SCAN mode. Check for strong electromagnetic interference in the environment.
• POE test fails or times out: Verify the connected port is indeed PoE-enabled. Ensure the cable is functional and correctly connected.
• Дисплей бош же катып калган: Түзмөктү өчүрүп күйгүзүп көрүңүз. Эгер маселе чечилбесе, кардарларды колдоо менен байланышыңыз.

7. Техникалык шарттар

8. Кепилдик жана колдоо

NOYAFA is committed to providing high-quality products. For warranty information, technical support, or service inquiries, please refer to the official NOYAFA webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз.

You can visit the official NOYAFA store for more information and support: NOYAFA Store on Amazon