LEHMANN LGALM-2646

Lehmann LGALM-2646 бензин чөп чапкыч колдонуучунун колдонмосу

Модель: LGALM-2646

1. Киришүү

Thank you for choosing the Lehmann LGALM-2646 Gasoline Lawn Mower. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new lawn mower. Please read this manual thoroughly before operating the machine and keep it for future reference.

1.1 Коопсуздук нускамалары

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or death.

2. Продукт бүтүп калдыview

Familiarize yourself with the components of your Lehmann LGALM-2646 lawn mower.

Lehmann LGALM-2646 Gasoline Lawn Mower with grass bag, extra blades, and oil bottle

2.1-сүрөт: Жалпысынан view of the Lehmann LGALM-2646 Gasoline Lawn Mower, including the grass collection bag, two spare blades, and a bottle of engine oil.

Close-up of the Lehmann LGALM-2646 lawn mower handlebar with labeled controls

2.2-сүрөт: Детальдуу view of the handlebar controls. (1) Engine Stop Lever, (2) Drive Lever.

2.1 Негизги компоненттер

3. Орнотуу

3.1 Ассамблея

The lawn mower requires minimal assembly. Follow these steps:

  1. Бардык компоненттерди картондон чыгарыңыз.
  2. Attach the handlebar to the main unit using the provided bolts and knobs. Ensure the handle is securely locked in the operating position.
  3. Assemble the grass collection bag if it came disassembled.
  4. Mount the grass collection bag onto the rear of the mower.

3.2 Алгачкы текшерүүлөр

Before first use, perform the following checks:

4. Операция

4.1 Моторду ишке киргизүү

Follow these steps to start your lawn mower:

Hand pulling the recoil starter cord on the Lehmann LGALM-2646 lawn mower

Figure 4.1: Starting the engine by pulling the recoil starter cord.

  1. Ensure the lawn mower is on a flat, level surface.
  2. Күйүүчү май көрүнгөнгө чейин праймер лампасын (эгер бар болсо) 3-5 жолу басыңыз.
  3. Hold the engine stop lever (1 in Figure 2.2) firmly against the handlebar. The engine will not start unless this lever is held.
  4. Pull the recoil starter cord with a swift, continuous motion until the engine starts. Do not let the cord snap back.
  5. Once the engine starts, release the recoil starter cord slowly.
  6. To engage the rear-wheel drive, hold the drive lever (2 in Figure 2.2) against the handlebar. Release it to disengage.

4.2 Чөп чабуу

For best results, mow when the grass is dry. Overlap cutting swaths slightly to ensure even coverage.

Lehmann LGALM-2646 lawn mower operating on green grass

Figure 4.2: The lawn mower in operation on a lawn.

4.3 Кесүү бийиктигин жөндөө

The Lehmann LGALM-2646 features a 7-stage борбордук кесүү бийиктигин жөндөө, 25 ммден 70 ммге чейин.

  1. Кыймылдаткычты өчүрүп, бычак толугу менен токтогончо күтө туруңуз.
  2. Locate the cutting height adjustment lever, typically near one of the rear wheels.
  3. Pull the lever outwards and move it to the desired height setting. The settings are usually numbered or indicated by notches.
  4. Бардык дөңгөлөктөрдү бирдей кесүү үчүн бирдей бийиктикте орнотулганын текшериңиз.

5. Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the life of your lawn mower. Always disconnect the spark plug cap before performing any maintenance.

5.1 Тазалоо

Clean the mower after each use, especially the cutting deck, to prevent grass buildup and corrosion.

Underside of the Lehmann LGALM-2646 lawn mower deck, highlighting the area to clean

Figure 5.1: Area under the cutting deck that requires regular cleaning to prevent grass buildup and maintain performance.

Image showing 'No Corrosion Warranty' on the Lehmann LGALM-2646 lawn mower

Figure 5.2: The robust steel housing is designed to resist corrosion, contributing to the mower's longevity.

5.2 Бычакка кам көрүү

A sharp blade ensures a clean cut and healthy lawn. Inspect the blade regularly for sharpness and damage.

5.3 Сактоо

For long-term storage (over 30 days), prepare the mower as follows:

6. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү чечет.

КөйгөйМүмкүн себепЧечим
Мотор иштебейтNo fuel; Spark plug cap loose; Engine stop lever not held; Stale fuel; Clogged fuel filter; Faulty spark plug.Add fresh fuel; Connect spark plug cap securely; Hold engine stop lever; Drain and refill with fresh fuel; Clean/replace fuel filter; Replace spark plug.
Мотор катуу иштейт же токтоп калатDirty air filter; Stale fuel; Clogged carburetor; Incorrect oil level.Clean/replace air filter; Drain and refill with fresh fuel; Clean carburetor (professional service recommended); Adjust oil level.
Бирдей эмес кесипDull or bent blade; Wheels set to different heights; Uneven terrain.Sharpen or replace blade; Ensure all wheels are at the same cutting height; Mow on level ground where possible.
Ашыкча термелүүBent or unbalanced blade; Loose blade bolt; Debris caught in blade area.Inspect and replace blade if bent; Tighten blade bolt; Clear debris from under the deck.

7. Техникалык шарттар

Technical data for the Lehmann LGALM-2646 Gasoline Lawn Mower.

ӨзгөчөлүкДеталь
Модель номериLGALM-2646
Мотордун жылышы146 см³
Мотор күчү3.5 HP
Drive TypeRear-Wheel Drive (Gasoline-powered)
Кесүү туурасы46 см
Кесүү бийиктигин тууралоо7-сtage central adjustment
Кесүү бийиктиги диапазону25 - 70 мм
Турак жай материалыRobust Steel
РульБүктөө функциясы
Элемент Салмагы29 кг
Продукциянын өлчөмдөрү (D x W x Y)150 x 52 x 112 см
ТүсКара / Кызыл

8. Кепилдик жана колдоо

For warranty information or technical support, please contact Lehmann customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Lehmann webсайтка же жергиликтүү дилериңизге кайрылыңыз.

Өндүрүүчү: Леманн
Бренд: ЛЕНМАН

Тектеш документтер - LGALM-2646

Preview LEHMANN CNC айланма үстөлдөрү - Негизги каталогдун 4-чыгарылышы | PGD, E, DD сериялары
LEHMANN компаниясынын CNC айланма үстөлдөрү үчүн негизги каталогунун 4-чыгарылышы. PGD, E-сериялары, DD сериялары жана башкаларды изилдеңиз. Өнөр жайлык автоматташтыруу жана так өндүрүш үчүн жогорку ылдамдыктагы, терс таасирсиз чечимдер.
Preview Lehmann микропрограммалык камсыздоосун жаңыртуучу: Кулпулар жана RFID окугучтары үчүн колдонуу боюнча нускамалар
Бул документ LEHMANN Firmware Updater программасынын иштөө боюнча нускамаларын камтыйт, анда Lehmann кулпуларындагы, RFID окугучтарындагы жана терминалдарындагы микропрограмманы кантип жаңыртуу керектиги кеңири баяндалган. Системалык талаптарды, шайкеш келген продуктыларды жана этап-этабы менен көрсөтмөлөрдү камтыйт.
Preview LEHMANN башкаруу программасынын колдонуучу үчүн колдонмосу: конфигурация жана иштетүү
LEHMANN башкаруу программасы (LMS) боюнча кеңири колдонуучу колдонмосунда LEHMANN RFID системаларын оффлайн жана онлайн режимдеринде конфигурациялоо, иштетүү жана башкаруу кеңири баяндалган. Транспондерлерди жана кулпуларды башкарууну, колдонуучунун жөндөөлөрүн жана системаны башкарууну камтыйт.
Preview LEHMANN M610 LEGIC L043-A03 Электрондук шкаф кулпусун колдонуу боюнча нускамалар
LEHMANN M610 LEGIC L043-A03 электрондук кулпусунун орнотуу, программалоо, иштетүү, техникалык тейлөө жана мүчүлүштүктөрдү оңдоо боюнча кеңири нускамалар.
Preview LEHMANN RFID Картенпрограммасы: Anleitung und Übersicht
Erfahren Sie, Wie Sie LEHMANN RFID-Schließsysteme mit verschiedenen Karten Wie Installations-, Master- и User-Karten программалык камсыздоо. Diese Anleitung erklärt die Betriebsmodi, Funktionen жана ден Reset-Prozess.
Preview LEHMANN VERTO DIAL LOCK ЖЕКЕ УКУК (FIX-CODE) - Колдонуу боюнча нускамалар жана колдонуучунун колдонмосу
LEHMANN VERTO DIAL LOCK ЖЕКЕ УКУГУ (FIX-CODE) үчүн кеңири колдонуу боюнча нускамалар жана колдонуучу колдонмосу. Колдонуучу кодун кантип орнотууну, өзгөртүүнү жана баштапкы абалга келтирүүнү, ошондой эле шашылыш түрдө эшикти кантип ачууну үйрөнүңүз.