Saker көп функциялуу мини чынжырлуу араа колдонуучусунун колдонмосу

Introduction

Thank you for choosing the Saker Multifunction Mini Chainsaw. This compact and powerful tool is designed for efficient cutting tasks such as pruning branches, cutting firewood, and light woodworking. Featuring a brushless motor and a 6-inch guide bar, it offers enhanced performance and durability. This manual provides essential information for safe operation, proper maintenance, and troubleshooting to ensure optimal performance and longevity of your chainsaw.

Image: Illustration comparing the benefits of a brushless motor (long lifetime, high power, more efficiency, low energy consumption, less maintenance) against a general motor.

Коопсуздук маалыматы

Электр шаймандарын иштетүүдө ар дайым коопсуздукка артыкчылык бериңиз. Бул нускамаларды аткарбоо олуттуу жаракатка же мүлккө зыян келтириши мүмкүн.

• Колдонмону окуу: Before operating, fully read and understand all instructions and safety warnings in this manual.
• Жеке коргонуу каражаттары (ЖКК): Always wear safety glasses or goggles, hearing protection, gloves, and sturdy footwear. Consider a hard hat and leg protection for extensive use.
• Иш чөйрөсү: Keep the work area clean, well-lit, and free of obstructions. Do not operate in wet or damp conditions. Keep bystanders, especially children and pets, at a safe distance.
• Курал абалы: Inspect the chainsaw before each use. Ensure all parts are secure, the chain is sharp and properly tensioned, and there are no damaged components. Do not use if damaged.
• Батареянын коопсуздугу: Use only the specified battery and charger. Do not expose batteries to extreme temperatures or water. Store batteries in a cool, dry place.
• Туура кармоо: Иштеп жатканда ар дайым чынжырлуу арааны эки колуңуз менен бекем кармаңыз.
• Артка соккунун алдын алуу: Be aware of kickback. Avoid cutting with the tip of the guide bar. Maintain a firm grip and proper stance.
• Тейлөө: Disconnect the battery before performing any maintenance, cleaning, or chain adjustments.

Пакеттин мазмуну

Upon opening the package, verify that all items listed below are present and undamaged. If any items are missing or damaged, contact Saker customer support.

• Saker Multifunction Mini Chainsaw (1 unit)
• 6-inch Guide Bar (1 unit)
• Saw Chains (2 units)
• 20V 2.0Ah Li-ion Batteries (2 units)
• Батарея кубаттагыч (1 даана)
• Safety Glasses (1 pair)
• Work Gloves (1 pair)
• Oil Bottle (empty, for chain lubrication) (1 unit)
• Storage Case (1 unit)

Image: The Saker Multifunction Mini Chainsaw displayed with its complete set of accessories, including two batteries, charger, two replacement chains, safety glasses, gloves, and a storage case.

Жайгашуу

1. Батареяны кубаттоо

1. Заряддоо түзүлүштү стандарттуу розеткага туташтырыңыз.
2. Insert the battery into the charger. The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged).
3. Батареяны биринчи жолу колдонуудан мурун толук заряддаңыз. Кубаттоо убактысы ар кандай болушу мүмкүн.
4. Заряддалгандан кийин, батареяны заряддагычтан чыгарыңыз.

2. Chain and Guide Bar Installation/Adjustment

The Saker Mini Chainsaw features a tool-free chain installation and tensioning system.

1. Ensure the battery is removed from the chainsaw before proceeding.
2. Locate the cover knob on the side of the chainsaw. Turn it counter-clockwise about one turn to loosen the cover, without fully removing it.
3. Carefully place the chain around the guide bar, ensuring the cutting teeth are facing the correct direction (refer to the arrow on the guide bar or chainsaw body).
4. Align the chain and guide bar with the sprocket and mounting slots on the chainsaw body.
5. Once the guide bar and chain are seated, adjust the chain tension using the chain tension knob. Turn the knob to tighten the chain until it is snug but can still be pulled freely around the guide bar by hand. The chain should not sag from the bottom of the guide bar.
6. Once tensioned, lock the cover knob in place by turning it clockwise until secure.

Image: Visual guide demonstrating the tool-free chain installation and tensioning process, highlighting the cover knob and chain tension knob. It contrasts this with traditional methods requiring a screwdriver.

Image: A three-step visual guide on how to tighten the chainsaw chain: 1. Loosen the knob, 2. Adjust tension, 3. Lock the knob.

Иштөө нускамалары

1. Операцияга чейинки текшерүү

• Батарея толук заряддалганын жана коопсуз салынганын текшериңиз.
• Verify the chain is properly tensioned and sharp.
• Check that all guards and safety features are in place and functional.
• Бардык керектүү ЖККларды кийиңиз.

2. Баштоо жана токтотуу

• To start: Press the safety lock button (if present) and then squeeze the trigger switch.
• Токтотуу үчүн: Триггердин ачкычын коё бериңиз. Чынжыр дароо токтошу керек.

3. Кесүү техникасы

• Жалпы кесүү: Hold the chainsaw firmly with both hands. Position the guide bar against the material to be cut. Apply steady, even pressure. Let the chainsaw do the work; do not force it.
• Бутоо: When pruning branches, cut from the underside first to prevent pinching, then complete the cut from the top.
• Кайрадан качуу: Never cut with the tip of the guide bar. Always use the bottom or top portion of the guide bar. Be aware of branches under tension that may spring back.

Image: The Saker Mini Chainsaw cutting through a log, illustrating its high-efficient cutting capability with a brushless motor, 30000 RPM motor speed, 26.25 ft/s chain speed, and 400W maximum output power.

Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your Saker Mini Chainsaw. Always remove the battery before performing any maintenance.

1. Тазалоо

• After each use, clean sawdust, chips, and debris from the chainsaw body, guide bar, and chain. Use a brush or compressed air.
• Жарнама менен сыртын сүртүңүзamp кездеме. Катуу химиялык заттарды колдонбоңуз.

2. Чынжырды майлоо

• The chainsaw requires manual chain lubrication. Fill the provided oil bottle with appropriate chain lubricant (not included).
• Apply a small amount of lubricant along the guide bar groove and chain regularly during operation, especially during extended use, to reduce friction and wear.

3. Чынжырды курчутуу жана алмаштыруу

• A sharp chain is crucial for efficient and safe cutting. Sharpen the chain regularly using a suitable chain file or have it professionally sharpened.
• Replace the chain when it becomes dull beyond sharpening, damaged, or stretched. Refer to the "Setup" section for chain replacement instructions.

Image: Two Saker 6-inch replacement saw chains, packaged for easy identification and replacement.

4. Батареяга кам көрүү жана сактоо

• Батареяларды күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• If storing for an extended period, charge the battery to approximately 50% capacity. Fully charge before next use.
• Do not store batteries in a discharged state.

Проблемаларды чечүү

Техникалык шарттар

• Модел: B0CSSNN564
• Бренд: Сакер
• Кубат булагы: Батарея менен иштейт
• Мотор түрү: Brushless
• Гид тилкесинин узундугу: 6 дюйм
• Батарея Voltage: 20V
• Батарея сыйымдуулугу: 2.0Ач (2000мАч)
• Мотор ылдамдыгы: 30000 RPM чейин
• Чынжыр ылдамдыгы: 26.25 фут/сек чейин
• Максималдуу чыгаруу кубаттуулугу: 400 Вт
• Биринчи жеткиликтүү болгон күнү: 19-январь, 2024-жыл

Кепилдик жана колдоо

For warranty information, technical support, or to purchase replacement parts, please contact Saker customer service. Refer to the product packaging or the official Saker webбайланыш маалыматы үчүн сайт.

Webсайт: Saker Official Store on Amazon