1. Introduction to the ELEGOO Neptune 4 Plus
The ELEGOO Neptune 4 Plus is a high-performance FDM 3D printer designed for efficiency and precision. It features advanced Klipper firmware, enabling impressive printing speeds and accelerations. With a generous build volume and versatile filament compatibility, it supports a wide range of creative projects.
Негизги өзгөчөлүктөрү:
- Макс басып чыгаруу ылдамдыгы: Up to 500mm/s (default 250mm/s) with 12000mm/s² acceleration.
- Куруу көлөмү: 320x320x385mm (12.59"x12.59"x15.15").
- High-Temp Nozzle: Up to 300°C with a 60W ceramic heating element for various filaments.
- Микропрограмма: Pre-installed Klipper for advanced control and precision.
- Төшөктү тегиздөө: Advanced 121-point auto-leveling and auxiliary leveling system.
- Экструдер: Self-developed dual-gear direct drive extruder with 5.2:1 reduction ratio.
- Муздатуу: Efficient double-sided cooling fans and model cooling blowers.
- Байланыш: WIFI, USB, and LAN for flexible file өткөрүп берүү.
Figure 1: The ELEGOO Neptune 4 Plus 3D Printer.
2. Кутудан чыгаруу жана чогултуу
Carefully unbox your ELEGOO Neptune 4 Plus and identify all components. Follow the steps below for proper assembly.
Компоненттер камтылган:
- Neptune 4 Plus FDM 3D Printer (Base and Gantry Frame Kit)
- Nozzle Kit
- Filament Holder Kit
- Электр кабели
- Heat-dissipation Module
- Touch Screen Kit
- Filament Breakage Detector
- Tie Rods
- Network Cable
- Filament (sampле)
- U Disk, Screws, Cable Ties, Glue Stick, Wrenches/Screwdriver, Pin
Видеону чогултуу боюнча колдонмо:
Video 1: Detailed unboxing and assembly instructions for the Neptune 4 Plus 3D Printer.
3. Орнотуу жана биринчи колдонуу
Proper setup is crucial for successful 3D printing. Follow these steps before your first print.
3.1 Initial Power On and Voltage Текшерүү:
Күйгүзүүдөн мурун, үнүн текшериңизtage switch on the printer's power supply matches your local voltage (115V же 230V). Туура эмес көлөмtage can damage the printer.
3.2 Bed Leveling:
The Neptune 4 Plus features both auxiliary and automatic bed leveling. For the first print, perform both to ensure optimal adhesion and print quality.
Video 2: Step-by-step guide on performing bed leveling for Neptune 4 Plus/4 Max.
3.3 Z-axis Compensation Fine-tuning:
Fine-tuning the Z-axis compensation value is critical for achieving a perfect first layer. Adjust this setting during the initial layers of a print to ensure proper adhesion and filament extrusion.
Video 3: Tutorial on fine-tuning the Z-axis compensation value for optimal first layer printing.
3.4 Filament Loading:
To load filament, first straighten the end of the filament to facilitate passage through the filament sensor and extruder. Insert the filament into the sensor, then into the extruder until it is gripped by the gears. Use the touch screen interface to initiate the loading process, heating the nozzle and extruding filament until it flows smoothly.
4. Принтериңизди иштетүү
Once set up, you can begin printing your 3D models. The Neptune 4 Plus offers high-speed and high-quality printing capabilities.
4.1 Printing Process:
Transfer your sliced G-code file to the printer via USB, WIFI, or LAN. Select the file from the touch screen interface and confirm to start printing. Monitor the first layer to ensure proper adhesion and adjust Z-offset if necessary.
Видео 4: Жалпы бүттүview of ELEGOO 3D printer capabilities and print examples.
4.2 Print Examples:
Видео 5: Мурункуample of printing a cactus toothpick holder on the Neptune 4 Plus.
Видео 6: Мурункуample of printing stackable boxes on the Neptune 4 Plus.
5. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө 3D принтериңиздин узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
5.1 Nozzle Oozing Cleaning:
If you notice filament oozing around the nozzle, it's important to clean it to prevent print failures and damage. Ensure the nozzle is heated before cleaning to soften any hardened filament.
Video 7: Instructions on how to clean nozzle oozing on your ELEGOO Neptune 4 series printer.
5.2 Belt Tension Adjustment:
Loose belts can lead to layer shifting and poor print quality. Regularly check and adjust the tension of the X and Y-axis belts using the provided knobs until they have proper elasticity.
Video 8: This video demonstrates how to adjust the eccentric nuts and belt tension if the printing platform or belts are loose.
6. Кыйынчылыктарды
Бул бөлүмдө сиз иштөө учурунда кабылышы мүмкүн болгон жалпы маселелер каралат.
6.1 First Layer Adhesion Issues:
- Nozzle too far from bed: Adjust Z-axis compensation downwards (refer to Video 3).
- Nozzle too close to bed: Adjust Z-axis compensation upwards (refer to Video 3).
- Uneven bed: Re-level the bed using both auxiliary and automatic leveling (refer to Video 2).
6.2 Басып чыгаруу сапатынын маселелери:
- Катмарды которуу: Check and tighten X and Y-axis belts (refer to Video 8). Ensure the printer is on a stable surface.
- Clogging/Under-extrusion: Clean the nozzle (refer to Video 7). Check filament path for obstructions.
- Over-extrusion: Adjust flow rate in your slicer software.
7. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Продукциянын өлчөмдөрү | 20.35 x 20.98 x 25.11 дюйм |
| Элемент Салмагы | 36.8 фунт |
| Build Volume | 320x320x385mm (12.59"x12.59"x15.15") |
| Макс басып чыгаруу ылдамдыгы | 500mm/s (default 250mm/s) |
| Соплолордун максималдуу температурасы | 300°C |
| Hotbed Power/Temperature | 320 Вт, 100°C |
| Микропрограмма түрү | Клиппер |
| Төшөктү тегиздөө | 121 points auto leveling and auxiliary leveling |
| Filament шайкештиги | PLA, ABS, TPU, PETG, Nylon, etc. |
| File Которуу ыкмасы | WIFI, USB, LAN |
| Материал | Металл |
| Түс | Ак |
8. Коопсуздук маалыматы
Always operate the 3D printer in a well-ventilated area. Keep hands clear of moving parts during operation. Do not touch the hot nozzle or heated bed during or immediately after printing. Ensure the correct voltage is selected before powering on the device. Keep children and pets away from the printer during operation.
9. Кепилдик жана колдоо
For warranty information and technical support, please refer to the official ELEGOO website or contact ELEGOO customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
