Phanteks XT View Орто мунара оюн шассисинин нускамасы

1. Киришүү

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Негизги өзгөчөлүктөрү:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Пакеттин мазмуну

Пакетте бардык компоненттер бар экенин текшериңиз:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Zip галстук (30x)
  • MB/SSD Screws (30x)
  • Бармак бурамалар (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Орнотуу жана орнотуу

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View шасси.

3.1. Шассини даярдоо

1. Таңылганын ачуу: Carefully remove the chassis from its packaging.
2. Панелдерди алып салуу: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Сүрөт 3.1: Интерьер view of the XT View chassis, ready for component installation.

3.2. Motherboard орнотуу

1. Standoffs орнотуу: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Энелик платаны жайгаштыруу: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Коопсуз Motherboard: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Электр менен камсыздоо блогун (PSU) орнотуу

1. Кызмат орду: PSU Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. Коопсуз PSU: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Сактоочу дискти орнотуу

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5 дюймдук катуу диск: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5 дюймдук SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Expansion Card (GPU) Installation

1. Slot капкактарын алып салуу: Remove the necessary expansion slot covers from the rear of the chassis.
2. Картаны кыстаруу: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Коопсуз карта: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Image 3.2: Rear interior view highlighting expansion slots and fan mounting points.

3.6. Желдеткичти жана Радиаторду орнотуу

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Кабелдик башкаруу

Кабелдерди уюштуруу үчүн энелик плата лотогунун артындагы кабелдерди өткөрүү каналдарын жана байлоочу чекиттерди колдонуңуз. Бул аба агымын жана эстетиканы жакшыртат.

Сүрөт 3.3: Арткы view illustrating cable management space.

3.8. Front I/O Connections

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• USB 3.0 баш
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Иштөө нускамалары

4.1. Күйгүзүү/өчүрүү

басыңыз Кубат баскычы located on the top front panel to turn the system on or off.

4.2. Front Panel Connectivity

The front I/O panel provides convenient access to:

• 1x USB 3.0 порту
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Техникалык тейлөө

5.1. Чаң чыпкаларын тазалоо

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Чыпкаларды алып салуу: Gently slide out or unclip the dust filters.
2. Таза: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Кайра орнотуу: Place the clean, dry filters back into their positions.

5.2. Жалпы тазалоо

For external surfaces, use a soft, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.

6.1. Система күйбөй жатат

• Кубат туташуулары: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Энелик платалардын туташуулары: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Motherboard синхрондоштуруу: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Баскычтын иштеши: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Байланыштары: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Тоскоолдуктар: Check for any cables or objects obstructing fan blades.
• Чаң: Желдетүүчү бычактагы чаңды тазалаңыз.

7. Техникалык шарттар

8. Колдоо жана кепилдик

For additional information, technical support, or warranty inquiries, please visit the official Phanteks webсайт:

www.phanteks.com

Refer to the Phanteks webсиздин аймагыңызга тиешелүү эң акыркы кепилдик шарттары жана эрежелери үчүн сайтты караңыз.